ASSEMBLY INSTRUCTIONS
Friendly Reminder
- This sofa is packed in two boxes; please ensure both boxes have arrived before beginning assembly.
- Before starting, review the instructions carefully and confirm that all parts are included.
- Keep the vacuum-sealed cushions unopened until the sofa frame is fully assembled.
- Due to vacuum packing, cushions may have wrinkles. To help them regain their original shape, give each cushion a few firm slaps and allow up to 72 hours for any wrinkles to disappear.
[Diagram showing two possible configurations of the assembled sofa, one with an armrest on the left and one with an armrest on the right, labeled "or"]
Return & Warranty Policy
- We are dedicated to delivering high-quality products and exceptional service to ensure your satisfaction. If you need replacements or assistance, please don't hesitate to reach out to us.
- If your item arrives damaged or defective, kindly take multiple photos as evidence to support replacement or refund requests.
- Please do not return the item to the store. For any issues with this product, contact the seller directly for support.
BOX A PART LIST
| NO | DESCRIPTION | SKETCH | QTY |
|---|---|---|---|
| A | Seat frame (front) | [Diagram of a rectangular frame] | 1 |
| B | Seat frame (back) | [Diagram of a rectangular frame] | 1 |
| C | Armrest | [Diagram of an L-shaped piece] | 1 |
| I | Lumbar pillow | [Diagram of a rectangular pillow] | 1 |
| E | Seat cover | [Diagram of a fitted cover] | 1 |
| K | Plug | [Diagram of a small plug with wire] | 1 |
BOX B PART LIST
| NO | DESCRIPTION | SKETCH | QTY |
|---|---|---|---|
| F | Back frame | [Diagram of a rectangular frame] | 1 |
| G | Seat cushion | [Diagram of a rectangular cushion] | 1 |
| H | Head pillow | [Diagram of a rectangular pillow] | 1 |
| D | Back cushion | [Diagram of a rectangular cushion] | 1 |
| J | Leg | [Diagram of a cylindrical leg] | 10 |
Hardware List
| NO | DESCRIPTION | SKETCH | QTY |
|---|---|---|---|
| 1 | Washer | [Diagram of a washer] | 16 |
| 2 | Screws M8x60mm | [Diagram of a screw] | 8 |
| 3 | Screws M8x90mm | [Diagram of a longer screw] | 4 |
| 4 | Butterfly nut | [Diagram of a butterfly nut] | 4 |
| 5 | Wrench | [Diagram of an L-shaped wrench] | 1 |
| 6 | Gasket | [Diagram of a gasket/seal] | 10 |
All Parts and Hardware
[Diagram showing all parts A-K and hardware items laid out and labeled.]
Assembly Steps
Step 1: Assemble the Sofa Frame
[Diagram showing parts A and B being joined. Holes for screws are indicated.]
Instruction: Put all screws in the holes, then tighten one by one.
Hardware used: 8x M8x60mm screws (2), 4x M8x90mm screws (3).
Step 2: Assemble the Sofa Backrest
[Diagram showing parts A, B, and F being joined. Holes for screws and nuts are indicated.]
Instruction: Put all screws in the holes, then tighten one by one.
Hardware used: 4x M8x60mm screws (2), 4x Butterfly nuts (4).
Step 3: Assemble the Armrests
[Diagram showing parts A, B, F, and C being joined. Holes for screws and nuts are indicated.]
Instruction: Put all screws in the holes, then tighten one by one.
Hardware used: 4x M8x60mm screws (2), 4x Butterfly nuts (4).
Step 4: Assemble the legs of the sofa
[Diagram showing legs (J) being attached to the underside of the sofa frame using gaskets (6). Plugs (K) are also shown.]
Instruction: Attach the legs (J) to the sofa frame using gaskets (6).
Step 5
[Diagram showing the head pillow (H) being placed on the backrest (F, B, A). A circular inset shows the plug (K) with a wire.]
Instruction: Place the head pillow (H) onto the backrest. Connect the plug (K).
Step 6
[Diagram showing the seat cover (E) being attached to the sofa frame with Velcro strips.]
Instruction: Attach the seat cover (E) using the stick velcro.
Step 7: Recover the vacuum-sealed cushions
[Diagrams illustrating the process of opening vacuum-sealed cushions (G, I, D) and patting them to restore their shape.]
Instruction: Carefully cut and open the vacuum-sealed bags, pull the cushions out of the bags, and gently pat them to evenly fluff, shake or roll them to help restore their original shape.
Step 8: Assemble the cushions
[Diagram showing the placement of seat cushion (G), lumbar pillow (I), and back cushion (D) onto the assembled sofa frame.]
Note: The seat and back cushions need 48 hours to decompress and fully inflate before using them.
Tips for Assembly and Safety
- Assemble the Frame First: Do not open the compressed packages until the sofa frame is fully assembled.
- Allow Cushions to Expand: Compressed back cushions and pillows need up to 72 hours to fully expand for optimal comfort.
- Keep Children Safe: Keep children away from plastic bags or small parts to avoid potential hazards.
COMPLETE
Enjoy it!
[Diagrams showing the completed sofa assembly, with an "or" indicating a choice in armrest configuration.]
Remark: The armrest can change; you can put it left or right.
[Diagrams showing two assembled sofas, suggesting the purchase of multiple units for a larger configuration.]
Instruction: If you need this combination, please purchase two boxes.
