BESTÅ
IKEA of Sweden
Product Overview
This guide provides instructions for installing the IKEA BESTÅ soft-closing push-open hinge system, designed for handle-less cabinet doors.
Required Tools:
- Phillips head screwdriver
- Flat head screwdriver
Included Components:
Hinge Assembly: 2x (Part 130451)
Push-Open Mechanism: 1x (Part 124216)
Mounting Plate for Push-Open: 1x (Part 124217)
Fasteners:
- 2x Mounting Brackets (Part 115443)
- 2x Mounting Brackets (Part 115444)
- 4x Screws (Part 116637)
- 2x Screws (Part 117685)
- 2x Screws (Part 113286)
Hinge Installation
Follow these steps to install the soft-closing hinges:
Step 1: Attach Hinge Mounting Brackets to Cabinet
Secure the two types of hinge mounting brackets (Parts 115443 and 115444) to the cabinet side panel using four screws (Part 116637). Ensure correct orientation as depicted in the diagrams.
Diagram: Shows two distinct mounting brackets (115443, 115444) being affixed to a cabinet side panel with screws (116637).
Step 2: Attach Hinge to Cabinet Door
Attach the hinge assembly (Part 130451) to the cabinet door using two screws (Part 117685). Position the hinge in the pre-drilled holes on the door.
Diagram: Illustrates the hinge assembly (130451) being screwed onto a cabinet door using screws (117685).
Step 3: Mount Door to Cabinet
Connect the cabinet door, with the attached hinges, to the mounting brackets on the cabinet side. Secure this connection using two screws (Part 117685).
Diagram: Depicts the cabinet door with hinges being attached to the cabinet's mounting brackets, secured by screws.
Push-Open Mechanism Installation
Install the push-open mechanism for handle-less door operation.
Step 1: Attach Push-Open Mounting Plate
Affix the mounting plate for the push-open mechanism (Part 124217) to the inside of the cabinet. Use two screws (Part 113286) for this attachment, positioning it as required.
Diagram: Shows the push-open mounting plate (124217) being fastened to the interior of a cabinet with screws (113286).
Step 2: Insert Push-Open Mechanism
Insert the push-open mechanism (Part 124216) into the mounted plate. It will engage with an audible 'Click!' sound.
Diagram: Illustrates the push-open mechanism (124216) being inserted into its plate, with a 'Click!' sound effect indicated.
Hinge Adjustment
Fine-tune the door alignment and closing action using the adjustment screws on the hinge:
- Vertical Adjustment: Move the door up or down by turning the designated screw. [Up/Down Arrows]
- Horizontal Adjustment: Move the door left or right by turning the designated screw. [Left/Right Arrows]
- Depth Adjustment: Adjust the door's inset or outset by turning the designated screw. [In/Out Arrows]
Diagram: Shows three types of hinge adjustments indicated by directional arrows.
