HJÄLPA Standard Hinge
Assembly Instructions
Brand: IKEA
Assembly Steps
Step 1: Prepare and Attach Hinge
This step involves preparing the hinge and attaching it to the cabinet door. Ensure you have the correct tools, such as a screwdriver. The diagram shows the hinge components and how they fit together. A specific part number, 104663, is indicated for the hinge.
Components:
- Hinge (1x)
- Mounting screws (implied)
Diagram Description: The first part of the diagram shows a close-up of the hinge. The second part shows how to attach the hinge to the cabinet door, with a callout for part number 104663. The third part shows the hinge being attached to the cabinet frame.
Step 2: Mount Doors to Cabinet
This step illustrates mounting the prepared doors with the attached hinges onto the main cabinet structure. Two doors are shown being attached to a cabinet frame.
Diagram Description: The diagram shows two cabinet doors being fitted onto a cabinet. Close-up views highlight the hinge attachment points on both the door and the cabinet frame.
Step 3: Adjust Hinge Position
This step provides guidance on adjusting the hinge to ensure the doors are properly aligned and close correctly. Adjustments can be made in multiple directions.
Adjustment Guide:
Use the provided screws to adjust the door position:
- Up/Down Adjustment: Turn the indicated screw to move the door vertically. [Up/Down Arrow Emoji]
- In/Out Adjustment: Turn the indicated screw to move the door horizontally in or out. [Left/Right Arrow Emoji]
- Left/Right Adjustment: Turn the indicated screw to move the door left or right. [Left/Right Arrow Emoji]
Diagram Description: The diagram shows three separate adjustment scenarios. Each scenario depicts a screw on the hinge being turned with a screwdriver, illustrating the effect on the door's position relative to the cabinet.
