IKEA BESTÅ Assembly Instructions

Safety First!

WARNING!

Serious or fatal crushing injuries can occur from furniture tip-over. To prevent tip-over, this furniture must be used with the wall attachment device(s) provided.

Screws and plugs for the wall are not included. Use screws and plugs suitable for your walls. If you are uncertain, seek professional advice. Read and follow each step of the instructions carefully.

עברית

אזהרה!

נפילת הרהיט עלולה לגרום לפגיעה גופנית חמורה או קטלנית.

על מנת למנוע את נפילת הרהיט, יש לקבע אותו לקיר באמצעות אבזרי הקיבוע הכלולים באריזה.

הברגים לקיבוע אינם כלולים מכיוון שיש להתאים אותם לחומר ממנו עשוי הקיר המיועד. לקבלת מידע נוסף על הברגים המתאימים לקיבוע, אנא פנו לאיש מקצוע. קראו ופעלו לפי ההוראות המפורטות בזהירות.

Tools Required

The following tools are recommended for assembly:

• Screwdriver (Phillips head) ?
• Screwdriver (Flat head) ?
• Spirit level ?

Assembly Steps

Step 1

Attach the base feet to the bottom panels using the provided screws (8x).

Diagram Description: Shows two long panels being laid flat. Eight circular feet with screw threads are being attached to the underside of these panels.

Step 2

Connect the side panels to the bottom panels using the provided screws (16x).

Diagram Description: Shows the bottom panels with feet attached. Side panels are being positioned vertically and screwed into the bottom panels.

Step 3

Insert the vertical dividers into the designated slots on the bottom panels.

Diagram Description: Shows vertical divider panels being inserted into the grooves of the assembled base structure.

Step 4

Secure the vertical dividers using the cam lock system (4x sets).

Diagram Description: Close-up view of cam locks and screws being used to secure the vertical dividers to the base and top panels.

Step 5

Attach the mounting brackets to the sides of the unit using screws (2x).

Diagram Description: Shows metal brackets being screwed onto the outer sides of the assembled cabinet structure.

Step 6

Insert the shelves into the cabinet.

Diagram Description: Shows shelves being slid into place within the cabinet compartments.

Step 7

Secure the shelves using the cam lock system (4x sets).

Diagram Description: Close-up view of cam locks and screws securing the shelves in place.

Step 8

Attach the back panels to the unit.

Diagram Description: Shows thin back panels being slid into grooves on the rear of the cabinet and secured.

Step 9

Place the top panel onto the assembled unit and secure it.

Diagram Description: Shows the top panel being placed on the cabinet and secured with fasteners.

Step 10

Secure the top panel further using the cam lock system (4x sets).

Diagram Description: Close-up view of cam locks being used to further secure the top panel.

Step 11

Attach the decorative edge pieces to the top of the unit (2x).

Diagram Description: Shows decorative strips being attached to the front edge of the top panel.

Step 12

Attach the final decorative edge piece (1x).

Diagram Description: Shows a final decorative strip being attached to the front edge of the top panel.

Step 13

Attach the drawer runners or door hinges as per the specific configuration.

Diagram Description: Shows the attachment of drawer runners or door hinges to the inside of the cabinet.

Step 14

Route any cables through the designated openings.

Diagram Description: Shows cables being fed through holes in the back of the cabinet.

Step 15

Connect any lighting or electronic components, ensuring a secure click.

Diagram Description: Shows electrical connectors being plugged in, with a 'click' sound indicated.

Step 16

Adjust the leveling feet to ensure the unit is stable.

Diagram Description: Shows the unit being tilted slightly, and the leveling feet at the bottom being adjusted.

Step 17

Ensure all adjustable feet are correctly positioned for stability.

Diagram Description: Similar to step 16, emphasizing the adjustment of leveling feet.

Step 18

Secure the unit to the wall using the provided wall attachment hardware. Ensure a secure 'click' when attaching.

Diagram Description: Shows the wall attachment bracket being secured to the wall and then to the top of the cabinet.

Step 19

Final check of all connections and stability. Ensure all shelves are correctly seated.

Diagram Description: Shows a final overview of the assembled unit, with arrows indicating checks on shelves and connections.

Final Check and Wall Mounting

Before use, ensure the unit is stable and securely attached to the wall using the provided anti-tip hardware. This is crucial to prevent serious injury.

Diagram Description: Shows the assembled TV bench against a wall, with the wall attachment strap clearly visible and secured to both the unit and the wall.