Heyday B29+MQZ (2.4G-BT Wireless Mouse) Instructions Manual
Size: 8 in x 5.6 in = 203.2 x 142.24mm
Getting Help
Can't get it to pair? Just have a question?
Call us at: 877-698-4883
Online at: TargetTechSupport.com
Safety Information
- Do not use near any water source.
- Do not modify or repair this device.
- Do not use in high temperatures or extreme weather.
- Do not use chemical detergents to clean your device; use a soft dry cloth.
Product Information
FCC ID: PRDMU124
Model: B2K-WG
DPCI: 056-00-6362
Input: 1.5V 50mA
Made in: VIETNAM
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: 1) this device may not cause harmful interference, and 2) this device must accept interference received, including interference that may cause undesired operation.
FCC Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment.
Radiation Exposure Statement: The product complies with the FCC portable RF exposure limit set forth for an uncontrolled environment and is safe for intended operation as described in this manual. Further RF exposure reduction can be achieved if the product can be kept as far as possible from the user body or the device is set to lower output power if such function is available.
Battery life may vary depending on usage and computing conditions.
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by TargetCorp. is under license. Other trademarks and trade names are those of their respective owners.
Heyday Compact Wireless Mouse Overview
This mouse can be connected via a wireless USB receiver or Bluetooth.
Components:
- Top: Left Click, Right Click, Scroll Wheel (Middle Click)
- Bottom: ON/OFF switch, Connect/Pairing button, LED indicators (battery status, connection channel)
- Underneath: Battery compartment (1 x AA battery), Wireless USB receiver storage
- Included: Wireless USB receiver
Diagram Description: The diagram shows the top and bottom views of the mouse, highlighting the buttons, scroll wheel, ON/OFF switch, and USB receiver compartment. It also illustrates the inclusion of a wireless USB receiver and a single AA battery.
Detailed Setup
This mouse can be paired with up to 3 different devices.
Use the "Switch" button to switch connection channels between the wireless USB receiver and 2 other Bluetooth channels.
Switching Channels:
- Short press the "Switch" button once to see the current channel. The LED indicator will flash for approximately 3 seconds.
- To switch channels, press the "Switch" button again within those 3 seconds.
Connecting via Wireless USB Receiver:
This is a plug-and-play connection. Ensure the power is on, the correct channel is selected, and then plug the USB receiver into an available USB-A port on your device.
Troubleshooting (USB Receiver):
- Turn off your mouse, unplug and re-plug the USB receiver, then turn the mouse power on (ensure the correct channel is selected).
- Press the "Connect" button (keep the mouse close to the receiver).
- If it does not work after 10 seconds, repeat steps 1 to 3.
Connecting / Pairing via Bluetooth
Bluetooth Pairing in Windows:
- Turn on your mouse and set it to either Bluetooth channel 1 or 2.
- Go to Start Menu > Settings > Devices > Bluetooth & other devices.
- Turn on Bluetooth, then click "Add Bluetooth or other device" > "Add a device (Bluetooth)".
- Press and HOLD the "Connect" button on the mouse to enter pairing mode (its LED will flash green).
- Click on "heyday compact mouse" to connect. The LED will stop flashing and remain green for about 3 seconds before turning off upon successful pairing.
Bluetooth Pairing in Mac:
- Turn on your mouse and set it to either Bluetooth channel 1 or 2.
- Click the Apple menu > System Preferences > Bluetooth. Turn Bluetooth on if it's not already.
- Press and HOLD the "Connect" button on the mouse to enter pairing mode (its LED will flash green).
- Click on "heyday compact mouse" to connect. The LED will stop flashing and remain green for about 3 seconds before turning off upon successful pairing.
Troubleshooting (Bluetooth):
- Turn off your mouse, then turn it back on (ensure the correct channel is selected).
- Make sure Bluetooth is enabled on your device.
- Press and HOLD the "Connect" button to set the mouse in pairing mode and ensure it is discoverable on your device, then connect.
- If it does not work after 10 seconds, repeat steps 1 to 3.
If the mouse is not working with previously paired devices, ensure Bluetooth is enabled on that device and the mouse is set to the correct Bluetooth channel (e.g., channel 1 for a tablet, channel 2 for a laptop).
Low Battery Indicator
If the LED indicator starts flashing, it means the battery needs to be replaced.
Battery Status LED Indicator: Located underneath the mouse.
Manufacturing Information
Project Name: B29(2.4G-BT wireless mouse) for heyday Instructions Manual (Made in VIETNAM)
Date: 2022.10.17
Dimensions: Unfolded - 8 in x 5.6 in = 203.2 x 142.24mm; Folded - 4 in x 5.6 in = 101.6 x 142.24mm
Paper Type: Double-sided paper, 70 lb
Process Colors: K (Black)
Target : Expect More. Pay Less.
