Mackie CR StealthBar Desktop PC Soundbar

About the CR StealthBar

The Mackie CR StealthBar is a desktop PC soundbar designed to enhance your computer audio experience. It features Bluetooth connectivity for wireless streaming and multiple input options.

This document is a Quick Start Guide, providing essential safety information, setup instructions, and technical specifications. It was originally available in English (EN), Spanish (ES), French (FR), and German (DE).

Important Safety Instructions

Please read and follow all safety instructions provided in the original document to ensure safe operation. Key points include:

• Read and keep all instructions.
• Heed all warnings and follow all instructions.
• Do not use near water; clean only with a dry cloth.
• Ensure adequate ventilation (at least 5 cm around the unit).
• Avoid heat sources and open flames.
• Do not defeat plug safety features (polarized/grounding).
• Protect the power cord from damage.
• Use only manufacturer-specified accessories.
• Use caution with carts to prevent tip-over.
• Unplug during lightning storms or long periods of non-use.
• Refer servicing to qualified personnel.
• Do not expose to dripping or splashing; do not place liquid-filled objects on the unit.
• Do not overload outlets or extension cords.
• Symbols indicate complete disconnection from mains power.
• Refer to exterior enclosure for electrical and safety info.
• Compliance with FCC Rules (Class B digital device) and Canadian regulations is noted.
• Exposure to high noise levels can cause hearing loss; use hearing protection if necessary.
• Dispose of the product correctly according to WEEE directives (♻️ symbol).

Panel Descriptions

The CR StealthBar features several controls and connections:

• 1. Power Connector: Connect the supplied power adapter (?) here.
• 2. USB I/O: Interface for streaming audio to/from a computer via USB-C (?). Connect the USB-C end to the soundbar and USB-A to the computer.
• 3. Line Input: Connect a line-level audio source using a 3.5mm (1/8") connector (?).
• 4. Output: Connect to a subwoofer using a 3.5mm (1/8") connector (?).
• 5. Bluetooth Button and LED: For pairing, connecting, and controlling playback. Press and hold to pair, press quickly to connect to the last paired device or to play/pause audio. Note: Bluetooth may disconnect due to Electrostatic Discharge [ESD] and may require manual reconnection.
• 6. Phones Output: Connect stereo headphones (?) here.
• 7. Volume Knob: Adjusts overall output level and powers the unit on/off. Push the knob to mute audio.
• 8. EQ Button: Press repeatedly to cycle through EQ presets. Release to select a preset.
• 9. Input Selector: Selects the active audio source (USB, 3.5mm Line Input, or Bluetooth).

Getting Started

Follow these steps to set up your CR StealthBar:

1. Read and understand the safety instructions.
2. Ensure all connected equipment is powered OFF and the volume is turned all the way down.
3. Connect the included power cord to the CR StealthBar's power connector (?) and plug the other end into an AC outlet.
4. Connect your audio sources:
   • Line-level source to the Line Input (3.5mm ?).
   • Computer (?) to the USB-C jack.
   • Smartphone paired and connected via Bluetooth.
5. Turn on the CR StealthBar using the Volume Knob (?️).
6. Confirm the Input Selector is set to your desired input source.
7. Slowly raise the input and output volume knobs to achieve a comfortable listening level.

Technical Specifications

Note: Specifications are subject to change.

Warranty and Support

For warranty information, owner's manuals, software/firmware downloads, product registration, and technical support, visit WWW.MACKIE.COM.

Please keep your sales receipt in a safe place.