Polk MagniFi One

Introduction

Elevate your TV audio experience and eliminate cable clutter with the Polk MagniFi One compact soundbar and wireless subwoofer system. Immerse yourself in a new dimension of TV sound, replacing weak built-in TV speakers with a rich, enveloping audio experience, free from the typical wires of home theater systems. Prepare for a new way to experience fantastic Polk audio.

The MagniFi One compact soundbar system with VoiceAdjust technology installs in minutes, connects wirelessly with easy setup, and recreates the immersive effect of a soundstage all around you. TV programs, concerts, movies, and video games will gain that extra audio touch you won't want to live without.

VoiceAdjust technology enhances vocal intelligibility and dialogue clarity. Pre-configure DSP Immersion modes for movies, music, and sports to tailor your audio for optimal performance with the touch of a button. Polk's exclusive Full Complement Bass technology allows this slim soundbar to deliver deep bass.

It integrates perfectly with the 7" (177.8 mm) wireless subwoofer, enhancing bass impact harmonically even at maximum levels, eliminating the hassle of wired connections.

Additionally, the MagniFi One offers integrated Dolby Digital 5.1 processing and SmartBar™ remote learning capabilities.

Bluetooth® wireless technology is built into the MagniFi One, giving you instant access to your digital music library from any smartphone, tablet, or other Bluetooth-enabled device.

About Polk Audio

Founded by passionate sound engineers in Baltimore in 1972, Polk Audio is a leading company in the home, automotive, and multimedia audio sectors, and the largest audio brand of Sound United. Polk Audio's mission is simple: to build high-quality speakers for unique sound and accessible audio products. Polk Audio products have earned many patents and accolades for innovations brought to the industry. Polk Audio products are sold throughout the United States, Canada, and in over 50 countries. For Polk Audio's "speaker specialists," building exceptional audio products is not just a job, but a passion.

Table of Contents

• Getting Started
• Connecting Your MagniFi One
• Soundbar Controls and Rear Panel Connections
• Connecting Your Wireless Subwoofer
• Remote Control and Corresponding LED Functions
• Instructions for Remote Learning
• Bluetooth Operation
• Product Registration
• Specifications, Technical Support, and Contact Information

Getting Started

Unpacking the MagniFi One

Carefully unpack the components, removing the subwoofer and soundbar in the order indicated on the box instructions. It is recommended to save the box and all packaging materials for reuse in case of relocation or if the product needs to be returned.

Box Contents

• 1. Soundbar
• 2. Subwoofer
• 3. 6' (1.83 m) Analog Stereo Cable (3.5 mm)
• 4. 6' (1.83 m) Optical Cable (3.5 mm)
• 5. Subwoofer Power Cable
• 6. Two RCA Audio Adapters (3.5 mm)
• 7. Soundbar Power Cable
• 8. Remote Control (battery included)
• 9. User Guide

Connecting the MagniFi One to Your TV

For optimal performance, position your MagniFi One soundbar:

• Directly below the TV, in front of the TV base.
• On the wall, directly above or below the wall-mounted TV. Use the included template and a level to ensure a straight installation. When mounting on drywall, ensure appropriate anchors are used.

The MagniFi One soundbar accepts audio inputs from three wired sources (Optical, AUX, and USB) and one Bluetooth source.

The simplest audio connection also offers the highest audio quality. Use the included Toslink optical audio connector to connect your TV's optical audio output to the optical audio input on the rear panel of the MagniFi One soundbar. If your TV does not have an optical audio output, you can use the optical connection from a DVD or Blu-Ray player, or your cable/satellite set-top box.

Connection Diagram Description: The rear panel of the soundbar features ports labeled 'OPT IN', 'AUX IN', and 'SUB SYNC'. The optical connection involves plugging the provided optical cable into the TV's 'OPTICAL OUT' and the soundbar's 'OPT IN'.

Soundbar Controls and Rear Panel Connections

Rear Panel Connections

The rear panel of the MagniFi One soundbar includes:

• 1. Power Input: Connect the power cord here. The soundbar is always in standby mode.
• 2. Audio Inputs: Optical (OPT IN), Analog/AUX (AUX IN).
• 3. SYNC Button: Used to synchronize the soundbar with the wireless subwoofer.

Soundbar Front Panel Controls

The front panel of the MagniFi One soundbar features several buttons:

• Power Button: Turns the soundbar on or puts it into standby mode. The leftmost LED on the soundbar is white when powered on.
• Night Mode Button: Instantly reduces master and bass volume while enhancing the voice channel for low-volume listening. The rightmost LED on the soundbar turns violet when activated.
• Mute Button: Selects/deselects mute for the soundbar and subwoofer. The leftmost LED on the soundbar blinks when in mute mode.
• Source Selection: Cycles through input sources: Optical (Source 1), AUX/Analog (Source 2), USB (Source 3), Bluetooth (Source 4).
• Volume Master (+/-): Adjusts the overall system volume.
• Volume Voice (+/-): Adjusts the volume of dialogue and vocals.
• Bass (+/-): Adjusts the subwoofer volume.
• Music Controls: Play/Pause, Skip Forward, Skip Backward (primarily for Bluetooth).
• DSP Modes: Select between Movie, Music, and Sport listening modes. Unique LED animations on the soundbar indicate the selected mode.
• Source/Learn Button: Press and hold for 3 seconds to enter learning mode for remote control programming. The rightmost LED turns blue when Dolby Digital is active.

Connecting and Controlling the Subwoofer

Wireless Subwoofer Connection

The MagniFi One's wireless subwoofer is designed for easy setup. It automatically receives the wireless signal from the soundbar. You can place the subwoofer anywhere in the room (within approximately 9 meters / 30 feet of the soundbar), even inside an entertainment cabinet, as long as it has access to a power outlet. For ideal bass response, position the subwoofer at the front of the room, to the left or right of the soundbar.

To connect the wireless subwoofer to the MagniFi One system, simply plug the subwoofer into the nearest power outlet. It will power on automatically.

Troubleshooting Wireless Connection

If the wireless subwoofer stops receiving an audio signal, follow these steps to re-establish the connection:

1. Unplug the subwoofer's power cord.
2. Press and hold the 'SYNC' button on the rear of the MagniFi One soundbar for three seconds.
3. The green LED next to the SYNC button on the soundbar will begin to flash rapidly (3 pulses per second) to indicate that the soundbar and subwoofer are ready to pair.
4. Plug the subwoofer's power cord back into the power outlet. It will power on automatically. When the subwoofer's green LED lights up solid, the soundbar and subwoofer are connected and ready to operate.

Subwoofer Status Light Codes

• a. Off: The subwoofer is powered off.
• b. Flashing Green: The subwoofer is searching for the soundbar.
• c. Solid Green: The subwoofer is connected to the soundbar.
• d. Solid Red: The subwoofer is not connected to the soundbar.
• e. Flashing Red: The subwoofer is in protected mode.

VoiceAdjust™ Technology

VoiceAdjust technology is easy to use. Use the Voice control button on the remote, or press the Voice button on the soundbar's front panel. Increase or decrease dialogue/vocal volume without affecting the master volume of the audio material. VoiceAdjust technology enhances details in low-quality or "low-volume" audio material, adding presence to dialogue and sound without needing to raise the master volume.

Remote Control Operation

Remote Control Functions

• Power [⚡]: Turns the soundbar on or puts it into standby mode. The leftmost LED on the soundbar is white when powered on.
• Night Mode [?]: Instantly reduces master and bass volume, enhancing the voice channel for low-volume listening. The rightmost LED on the soundbar turns violet when activated.
• Mute [?]: Selects/deselects mute for the soundbar and subwoofer. The leftmost LED on the soundbar blinks when in mute mode.
• Source Selection: Cycles through input sources: Optical (Source 1), AUX/Analog (Source 2), Bluetooth (Source 4).
• Volume Master (+/-): Adjusts the overall system volume.
• Volume Voice (+/-): Adjusts the volume of dialogue and vocals.
• Bass (+/-): Adjusts the subwoofer volume.
• Music Controls: Play/Pause [▶️/⏸️], Skip Forward [⏩], Skip Backward [⏪] (primarily for Bluetooth).
• DSP Modes: Select between Movie (Film), Music, and Sport listening modes. Unique LED animations on the soundbar indicate the selected mode.

SmartBar™ IR Learning

Configure Your TV's Infrared Remote for SmartBar™ Learning

To control your soundbar with your TV remote, you must first program the soundbar to respond to your TV's infrared (IR) remote commands. Radio frequency (RF) remotes cannot be used for this. Other remotes (cable/satellite TV) will only function after programming the soundbar to respond to the TV's IR remote.

Note: If learning fails, the first and third LEDs, followed by the second and fourth LEDs, will flash in pairs three times. The soundbar exits learning mode after multiple unsuccessful IR remote learning attempts. Repeat the operations carefully.

Programming Instructions

Your soundbar is programmed to respond to the included remote. However, it is highly recommended to program the soundbar to also respond to your home TV remote using the procedure below. This allows you to operate all your home system components with a single remote.

During soundbar programming, ignore any text that may appear on the TV screen.

Example: Learning the Volume Up Command

1. Ensure the soundbar is powered on, the white LED is dimming, and audio is outputting from the soundbar.
2. Press and hold the 'SOURCE/LEARN' button for 3 seconds. LEDs 1-4 on the soundbar will flash in ascending order.
3. Press the Volume Up button on the MagniFi One once.
4. Hold the TV remote 6 inches to 1 foot (15-30 cm) from the front of the soundbar.
5. Press the TV remote's Volume Up button once.
6. The learning LEDs will light up solid; the command has been learned. Two audible beeps confirm successful command learning.

Repeat operations 1-6 to program the Volume Down [-], Source, Mute, and Power buttons.

Saving IR Commands

Once all your TV remote commands are programmed, press and hold the Source button for 3 seconds to initialize the learning function. This saves all commands.

Clearing Learned Codes

If your soundbar was programmed to respond to a remote but you no longer want this functionality, clear the codes by pressing and holding the SOURCE button for approximately 10 seconds while in standby mode. The first LED will flash green, then white. This sequence will repeat three times, indicating that previously programmed codes have been cleared.

Note: This procedure clears ALL programmed remote commands for the soundbar. To modify specific button programming, repeat the six-step sequence described earlier to re-establish any previous programming. The soundbar will continue to respond to its own remote.

Bluetooth Function

Bluetooth technology allows easy access to your digital music library from any smartphone or Bluetooth device. Select Bluetooth as the source by pressing the Bluetooth button on the MagniFi One's front panel or the remote control. Selecting Bluetooth as the source initiates the following sequence until connection is complete:

1. Three white LEDs will flash.
2. The speaker searches for the last connected Bluetooth device, or
3. The speaker enters "discovery mode" and is available for pairing and/or connecting to any Bluetooth device. (After 10 minutes, the system enters standby mode.)

Regardless of the active source (other than Bluetooth), the speaker will remain in discovery mode, ready to connect to previously paired devices as long as the system is powered on.

Note: By pairing/selecting Bluetooth from a Bluetooth device, the speakers will switch to the Bluetooth source even if another source (USB, AUX) was selected.

Note: The last connected Bluetooth device will reconnect as soon as Bluetooth is selected.

Each time a Bluetooth device connects, the three white LEDs light up solid, then dim, accompanied by a descending audible tone.

The soundbar disconnects and enters "discovery mode" for 10 minutes under the following conditions:

• The BT button is pressed once.
• The Bluetooth source device disconnects.

When Disconnecting Bluetooth:

• When the speaker disconnects, you will hear a tone with gradually decreasing volume.
• When the speaker disconnects, the LED will illuminate for two seconds, stay solid for two seconds, then dim for two seconds, repeating this sequence.
• Pressing the Source button on the speaker switches to the Aux/Analog source.
• When the speaker reactivates from standby mode, and is in Bluetooth source mode, but the Bluetooth device is disconnected, the speaker enters discovery mode.

Product Registration

STOP! Register your new MagniFi One online now to win Polk products for FREE!

By registering your new product, you become a valued member of the Polk Family. Additionally, you can participate in monthly prize drawings for Polk products. Register your new product at www.polkaudio.com/registration/

Product registration:

• Creates a permanent record of your purchase in case your receipt is lost.
• Allows you to participate in monthly prize drawings for Polk products.
• Enrolls you in the Polk Club, giving you access to entertainment and informational forums on the Polk website, special discounts for the Polk Web Store, and notifications about promotions and sales on authorized Polk components.
• Keeps you updated on news and articles regarding your product.

Troubleshooting (FAQ)

The Soundbar Does Not Turn On

• Ensure the power cord is plugged into a working outlet.
• Verify that all power supply components are correctly connected.
• Confirm that power is reaching the soundbar's power input.

No Audio from the Soundbar

• Check that a signal is being received from the TV or cable set-top box. (If necessary, test with another source.)
• Verify that the soundbar is receiving power and is turned on.
• Increase the soundbar's volume.
• Check input cables to ensure they are securely connected.
• Increase the volume of the TV or cable set-top box.
• Check if mute mode is active: is the soundbar's status light blinking slowly? If so, press the Mute button on the soundbar.

Sound from the Soundbar is Distorted

• Try lowering the volume of your audio source, if possible.
• There may be AUDIO PROCESSING occurring before the signal reaches the soundbar. Disable this processing at the source.

The Included Remote Control Does Not Work

• Ensure the protective plastic tab has been removed from the battery.
• Replace the battery (CR2032).

The Soundbar Cannot Learn Home Remote Commands

• Carefully follow the programming instructions on the previous page of this manual.
• Hold the remote steady and at a distance of 1 to 2 feet (30-60 cm) from the front of the soundbar.
• Tap the home remote's button quickly until the status LED flashes green. The soundbar can learn almost all IR (infrared) remote commands, but some IR protocols cannot be programmed.

Technical Support and Contact Information

If you need assistance, contact Polk Audio customer service.

In North America: Call Polk customer service at 1-800-377-POLK (7655) *Option 1* (Monday-Friday, 9:00 AM - 5:30 PM EST) or email polkcs@polkaudio.com.

Outside the USA: Call +1-410-358-3600.

Specifications

Contact Polk Audio Directly

1 Viper Way
Vista, CA 92081
800-377-7655 | www.polkaudio.com