Kogan SmarterHome™ Smart Baby Monitor Camera

Components

The package includes the following components:

• A: Baby monitor (x1)
• B: Power adaptor (x1)
• C: USB to Micro USB cable (x1)
• D: Adhesive strip (x1)
• E: Bracket (x1)
• F: Temperature and humidity sensor (x1)
• H: Screw (x2)
• I: User guide (x1)

Diagram Description: A visual representation of the baby monitor camera, power adapter, USB cable, adhesive strip, bracket, temperature and humidity sensor, screws, and user guide.

Overview

The Kogan SmarterHome™ Smart Baby Monitor Camera features:

• Micro USB port: Connects to a power supply.
• Status light: Indicates the camera's connection status.
  • Solid red light: Not connected to Wi-Fi.
  • Blinking red light: Awaiting Wi-Fi connection.
  • Blinking blue light: Ready for connection.
  • Solid blue light: Connected to Wi-Fi.
• Microphone: Captures audio.
• microSD card slot: Supports FAT32 formatted microSD cards up to 256GB.
• Reset button: Press and hold for 5 seconds to reset the device to factory default settings.

Diagram Description: A diagram illustrating the baby monitor camera with labels pointing to the Micro USB port, Status light, Reset button, microSD card slot, Speaker, and Microphone.

Installation

The camera can be placed on a table or mounted to a wall.

Table Mounting:

Position the camera on the table as desired. The flexible tail can be bent as needed.

Diagram Description: An illustration showing the camera positioned on a table, with its flexible tail bent.

Wall Mounting:

If mounting to a wall, fix the camera using the provided bracket onto a clean surface. The bracket can be attached using either the provided screws or the adhesive strip.

Using Screws:

1. Mark the positions for the two screw holes in the bracket on the wall.
2. Use a drill (not supplied) to create holes at the marked locations. Insert two wall anchors (not supplied) into the holes.
3. Align the bracket's screw holes with the wall holes. Use a screwdriver (not supplied) to secure the bracket to the wall with the provided screws.
4. Insert the camera into the bracket at any angle.

Diagram Description: Illustrations showing the process of marking holes, drilling, inserting anchors, and screwing the bracket to the wall, followed by inserting the camera into the bracket.

Using the Adhesive Strip:

1. Mark the positions for the two screw holes in the bracket on the wall.
2. Peel one side of the backing off the adhesive strip and stick it to the desired wall location. Peel the other side of the backing off the strip and attach the bracket to the strip.
3. Insert the camera into the bracket at any angle.

Diagram Description: Illustrations showing the process of marking holes on the bracket, applying the adhesive strip to the wall, and attaching the bracket to the strip, followed by inserting the camera.

Powering On:

1. Connect the temperature and humidity sensor to the camera's Micro USB port.
2. Connect the Micro USB end of the power cable to the temperature and humidity sensor. Connect the USB-A end to the power adapter. Plug the power adapter into a socket and switch it on. The baby monitor will then power on.

Diagram Description: Illustrations showing the connection of the temperature/humidity sensor to the camera, and then the power cable to the sensor and power adapter.

Connect to Kogan SmarterHome™ App

Install App:

Download the “Kogan SmarterHome” app from the Play Store (Android) or App Store (iOS).

Register:

If you do not have a Kogan SmarterHome™ account, register or sign in with a verification code sent by SMS.

To register:

1. Tap to enter the registration page.
2. The system may automatically recognize your country/area. You can also select your country code manually. Enter your email address and tap 'Next'.
3. Alternatively, register by mobile number and enter the verification code sent via SMS.
4. Create a profile on the next page to define your location and room.

Diagram Description: Screenshots of the Kogan SmarterHome app registration process, showing fields for country, email/mobile number, and a button to get a verification code.

Set device in pairing mode:

When the device is first turned on, it may automatically enter pairing mode (indicated by a rapidly blinking blue light). If not, press and hold the reset button for 5 seconds until the blue light blinks rapidly.

Add device through network:

1. Once registered, tap the “+” icon on the app's home page to add a new device.
2. Select the product type: Home Security > Cameras.
3. Ensure the device is in pairing mode (blue light blinking rapidly) and tap "Confirm light is rapidly flashing”.
4. Enter your Wi-Fi details. Ensure your SmarterHome™ device and the app are connected to the same Wi-Fi network.
5. Tap 'Continue'. The mobile device will display a QR code. Hold the camera 15-20cm away to scan the QR code. Tap 'I Heard a Prompt' when you hear an audio tone.
6. The device will pair and connect to the app. Keep your Wi-Fi router, mobile phone, and SmarterHome™ device close until connection is complete.
7. After successful addition, you can rename the device and assign it to a location. It will appear on the app's home page. Tap the device listing to enter its control page.

Diagram Description: Screenshots illustrating the app interface during device pairing, including adding a device, confirming the flashing light, entering Wi-Fi details, scanning a QR code, and the device being added successfully.

Notes:

• The device and app must use the same Wi-Fi network.
• The device is only compatible with 2.4GHz networks.

Operation

Interface:

The app interface provides controls for the baby monitor:

Diagram Description: A screenshot of the Kogan SmarterHome app interface showing the live feed from the camera, with controls for full screen, screenshot, microphone, video recording, playback, gallery, theme color, night mode, device volume, motion detection, sound detection, and lullaby.

Motion and sound detection alarm notifications:

When enabled, the camera can send push notifications for detected motion or sound. To enable notifications:

1. In the Kogan SmarterHome™ app, go to the 'Me' tab and tap the settings icon.
2. Tap 'App Notification', then turn on 'Enable Notifications' and 'Alarm'. The toggles will turn green.

Diagram Description: Screenshots showing the app's settings menu, including sections for Personal Information, Account and Security, Sound, App Notification, Temperature Unit, About, Network Diagnosis, and Clear Cache. Another screenshot shows the 'Notifications Settings' with toggles for 'Enable Notifications' and 'Alarm'.

Note: Ensure notifications are enabled in your mobile device's settings to receive push notifications from the Kogan SmarterHome™ app.

Google Home Control

Note: A Google Home account is required to link your Kogan SmarterHome™ device.

Adding "SmarterHome" to the Google Home app:

1. In the Google Home app, select the “+” icon to access the 'Add and manage' page.
2. Select 'Set up device', then under the 'Works with Google' banner, select 'Have something already set up?'.
3. In the search bar, type ‘Smarter Home’ to find the Kogan SmarterHome™ service.
4. Tap 'Authorise' to grant Google permission to access your SmarterHome™ account and devices.
5. Sign in to your SmarterHome™ account using your registered email or mobile number.
6. Once connected, the app will display compatible devices linked to your SmarterHome™ account. You can assign them to rooms and set up routines.
7. Tap on a device to view available commands.

Diagram Description: Screenshots of the Google Home app showing the process of adding a device, searching for 'Smarter Home', authorizing access, signing into the SmarterHome account, and displaying connected devices within rooms.

Note: Google Home can only control basic functions. For full smart functionality, use the Kogan SmarterHome™ app.

Amazon Alexa Control

Note: An Alexa account is required to link your Kogan SmarterHome™ device.

Adding "SmarterHome" to the Alexa app:

1. In the Alexa app, select the menu icon (☰) and choose 'Skills & Games'.
2. Search for 'Smarter Home' to find the Kogan SmarterHome™ skill.
3. Tap 'Enable to Use' to add the Kogan SmarterHome™ skill to Alexa.
4. Sign in to your SmarterHome™ account using your registered email or mobile number.
5. Tap 'Authorise' to grant Alexa permission to access your SmarterHome™ app and devices.
6. Once connected, the app will search for and display devices linked to your SmarterHome™ account.
7. Control your Kogan SmarterHome™ devices using Alexa's voice commands.

Diagram Description: Screenshots of the Alexa app showing the process of enabling the 'Smarter Home' skill, authorizing access, and displaying connected devices.

Note: Alexa can only control basic functions. For full smart functionality, use the Kogan SmarterHome™ app.

Troubleshooting

Specifications

Notes

This section is for user notes.

Need more information?

For the most up-to-date guide and additional assistance, visit help.kogan.com.

kogan.com