ThermoPro TP-55 Indoor Humidity and Temperature Monitor Instruction Manual
Model No.: TP-55
General Warning
DANGER!
This device contains electronic components which operate via a power source (power supply and/or batteries). Do not let children use the device while unattended. Only use the device as described in the manual, otherwise you run the risk of an electric shock.
Children should only use the device under adult supervision. Keep packaging material, like plastic bags and rubber bands, out of the reach of children, as they pose a choking hazard.
Keep batteries out of the reach of children. Make sure you insert the batteries correctly. Empty or damaged batteries could cause burns if they come into contact with the skin. If necessary, wear adequate gloves for protection.
DANGER!
Do not expose the device to high temperatures. Use only the recommended batteries. Do not short-circuit the device or batteries, or throw them into a fire. Excessive heat or improper handling could trigger a short-circuit, a fire, or an explosion!
! NOTE!
Do not disassemble the device. In the event of a defect, please contact your dealer. The dealer will contact the Service Centre and can send the device in to be repaired, if necessary.
Use only the recommended batteries. Always replace weak or empty batteries with a new, complete set of batteries at full capacity. Do not use batteries from different brands or with different capacities. The batteries should be removed from the unit if it has not been used for a long time.
Notes on Cleaning
Separate the device from the power supply or remove the batteries before cleaning.
Only use a dry cloth to clean the exterior of the device. Do not use any cleaning fluid to avoid damaging the electronics.
Device Overview
The ThermoPro TP-55 features a large LCD display showing current readings and historical data.
Physical Components:
- Large LCD display: Shows current humidity and temperature, as well as max/min recorded values.
- SIDE: Refers to the side panel of the device.
- Wall hanging hole: Allows for wall mounting.
- Magnet: Enables magnetic mounting on metallic surfaces.
- Stand: A built-in stand for tabletop placement.
- Battery Compartment: Located on the back, holds the power source.
- Three Touch Buttons: Located below the display for user interaction.
Features and Specifications
Display Information
- Displays the current humidity and temperature.
- Shows the maximum and minimum humidity/temperature recorded in the past or past 24 hours.
Battery Compartment
- Holds 2 X AAA batteries to power the unit.
Specifications
- Temperature range: -58°F to 158°F (-50°C to 70°C).
- Humidity range: 10% to 99%.
- Comfort Level:
- DRY: If humidity is below 30%.
- COMFORT: If humidity is between 30% to 60%.
- WET: If humidity is above 60%.
- Temperature display unit: °C and °F selectable.
- Temperature Resolution: 0.1 °C/°F.
- Humidity Resolution: 1%.
- Refresh rate: 10 seconds.
- Power supply: 2 X AAA 1.5V batteries.
Design
- Totally wireless tabletop, magnet-mountable, and wall-mounted design.
Low Battery Indication
- Please replace battery as soon as possible when the low battery indicator is displayed, as a low battery will make the touch buttons less sensitive.
Backlight Function
- Press the [?] key to activate the backlight, then press it again to turn it off.
- If you do not press the button for 15 seconds, the backlight will automatically turn off.
Touch Buttons
- °C/°F: Touch once to change the temperature unit between Celsius (°C) or Fahrenheit (°F).
- < (Backlight): Touch once to turn on/off the backlight.
- ALL TIME/24 HRs: Touch to show the maximum and minimum temperature and humidity recorded since the last reset (ALL TIME option) or in the past 24 hours since last reset (24 HRs option). Please note: in the 24 HRs option, the maximum and minimum temperature and humidity will be automatically reset every 24 hours.
- To reset/clear all the maximum and minimum temperature and humidity recorded, touch and hold the "ALL TIME/24 HRs" button for 3 seconds.
Temperature & Humidity Trend
- [↑] Indicates the temperature & humidity is in an increasing trend.
- [→] Indicates the temperature & humidity is in a no change trend.
- [↓] Indicates the temperature & humidity is in a decreasing trend.
Before First Use
- Insert or Replace Battery: Insert two AAA batteries in correct polarity (+) and (-) as indicated.
- Do not immerse product body in water.
- The humidity and temperature monitor is now ready to use.
Care of Your Humidity/Temperature Monitor
- Do not leave exposed to extreme high or low temperatures since this will damage electronic parts and plastics.
- Remove battery if stored for more than four months.
Declaration of Conformity
- Hereby, ThermoPro declares that this product complies with the basic requirements and applicable regulations of the EMC Directive 2014/30/EU.
- The complete declaration of conformity can be found at: https://itronicsmall.com/eu-declaration-of-conformity/
Disposal
Meaning of the "Dustbin" Symbol [?️]
- Protect our environment: Do not dispose of electrical equipment in the domestic waste.
- Please return any electrical equipment that you will no longer use to the collection points provided for their disposal.
- This helps avoid the potential effects of incorrect disposal on the environment and human health.
- This will contribute to the recycling and other forms of reutilization of electrical and electronic equipment.
- Information concerning where the equipment can be disposed of can be obtained from your local authority.
CAUTION: Batteries/rechargeable batteries must not be disposed of with household waste! [⚠️]
- The batteries must be removed from the appliance.
- Take spent batteries to the appropriate collection point or to a dealer.
- Your town or local authority can provide information about public collection points.
- This symbol [♻️] can be found on batteries/rechargeable batteries which contain hazardous:
- Pb = contains lead
- Cd = contains cadmium
- Hg = contains mercury
- Li = contains lithium
Limited One-Year Warranty
- ThermoPro warrants this product to be free of defects in parts, materials, and workmanship for a period of one year, from date of purchase.
- Should any repairs or servicing under this warranty be required, contact Customer Service by phone or email for instructions on how to pack and ship the product to ThermoPro.
- This warranty gives you specific legal rights and you may also have other rights which vary from state to state.
Customer Service
- Telephone:
- 1-877-515-7797 (USA & Canada only)
- 44-203-769-1321 (UK)
- Email: service@buythermopro.com
- Hours: Weekdays 8:00 AM - 8:00 PM EST / 1:00 PM - 12:00 PM CET (UK)
FAQ
1. About the accuracy:
- ThermoPro hygrometers offer high accuracy for their price range. For laboratory-grade accuracy (within +/-1%), devices costing over $1000 are typically required. Compared to competitors, ThermoPro devices are accurate to within +/-3%, while others may be around +/-5%. Side-by-side comparisons might show a total accuracy difference of +/-8%. The most reliable test is to compare two ThermoPro devices; if their readings are within +/-6% of each other, the device is considered accurate.
2. About the humidity range: 10%~99%
- While ThermoPro hygrometers provide high accuracy for their price, in circumstances where humidity is below 10% (e.g., 5%), the device will display 10%. Only expensive laboratory equipment can accurately measure humidity below 10%. No device on the market can reliably read below 5%.
