Infinix HOT 50 Pro+

Model: X6880

Exploded Diagram Specification

The following table details the components of the Infinix HOT 50 Pro+:

Know Your Phone

The phone has the following external features:

Front View:

• 1. Front camera
• 2. Volume + button
• 3. Volume - button
• 4. Power button

Back View:

• 5. NFC (Near Field Communication) indicator

SIM/SD Card Installation

Follow these steps for SIM/SD card installation:

1. Power off your phone.
2. Refer to the provided diagrams for correct SIM/SD card placement. The diagrams show a SIM card tray labeled 'SIM 1' and 'SIM 2', and an 'SD' card slot.

Charging the Phone

You can charge your Infinix HOT 50 Pro+ using either the provided charger or by connecting it to a computer with a USB cable. It is recommended to use only Infinix-approved chargers and cables to avoid potential damage to the phone or voiding the warranty.

FCC Caution

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the device.

Information to the user:

This device has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This device generates, uses, and may radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this device does cause harmful interference to radio or television reception (which can be determined by turning the device off and on), the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the device and receiver.
• Connect the device to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Specific Absorption Rate (SAR) Information

This mobile phone meets the government's requirements for exposure to radio waves. The guidelines are based on standards developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons regardless of age or health.

FCC RF Exposure Information and Statement: The SAR limit of USA (FCC) is 1.60 W/kg averaged over one gram of tissue. Device types: X6880 (FCC ID: 2AIZN-X6880) has also been tested against this SAR limit. The highest SAR value reported under this standard during product certification for use at the ear is 0.71 W/kg and when properly worn on the body is 0.83 W/kg.

Body-worn Operation:

This device was tested for typical body-worn operations. To comply with RF exposure requirements, a minimum separation distance of 1.0 cm must be maintained between the user's body and the handset, including the antenna. Third-party belt-clips, holsters, and similar accessories used by this device should not contain any metallic components. Body-worn accessories that do not meet these requirements may not comply with RF exposure requirements and should be avoided. Use only the supplied or an approved antenna.

For DTS patents, see http://patents.dts.com. Manufactured under license from DTS Licensing Limited. DTS, the Symbol, & DTS and the Symbol together are registered trademarks or trademarks of DTS, Inc. in the United States and/or other countries. DTS, Inc. All Rights Reserved.

Operating System: Android™

Android is a trademark of Google LLC.