Product Information
Item Number: 871125227066
Manufacturer/Distributor: Edco Deutschland GmbH, Siemensstr. 31, 47533 Kleve Deutschland; Edco UK Ltd, 1st Floor Two Chamberlain Square, B3 3AX, Birmingham, UK; edco.nl
Recycling Information: This device, its accessories, batteries, and cords are recyclable. ♻️ Please dispose of them at designated collection points. Find collection points at www.quefairedemesdechets.fr.
Content
Please check that all the items below are included in your package:
- 1x Wake-up light alarm clock speaker
- 1x USB charging cable (Type-C)
- 1x AUX cable
- 1x User manual
Specifications
| Specification | Details |
|---|---|
| Bluetooth Version | 5.3 |
| Wireless Range | 10 m |
| Speaker | 3Ω, 50mm, 5Wx1 |
| Battery Type | Lithium-ion 18650 |
| Battery Capacity | 1200mAh |
| Function | Bluetooth, Alarm clock, Wake-up light, AUX, USB, Micro SD, FM, Handsfree phone calls |
| Product Weight | 490g |
| Dimensions | 18.2 x 8.5 x 16.5 cm (L x W x H) |
| Max RF output power | 2.37dBm |
| FM Frequency | 87.5 – 108 MHz |
| BT Frequency | 2402 – 2480 MHz |
Product Overview
The device is a rounded, white wake-up light with an integrated Bluetooth speaker and alarm clock. The front features a circular LED display showing time and temperature. Below the display are control buttons. To the right, a speaker grille is visible on the top surface. Above the grille are icons for RGB light ? and night light ?. The bottom front has ports for charging and media input.
| # | Component |
|---|---|
| 1 | LED Display |
| 2 | Buttons |
| 3 | RGB Light Touch Button |
| 4 | Night Light Touch Button |
| 5 | DC 5V Charging Port |
| 6 | Micro SD Card Slot |
| 7 | USB Host |
| 8 | AUX IN |
| 9 | Loudspeaker |
Using the Speaker
- ⏰ Short press to switch between 12-hour and 24-hour system; long press to set the time.
- ? Short press to turn the alarm clock on/off; when the alarm is ringing, short press to enter snooze mode. Long press to set the alarm clock.
- ➖ Decrease numbers when setting time; decrease volume in music mode.
- ➕ Increase numbers when setting time; increase volume in music mode.
- M Short press to switch mode; long press to switch temperature mode (°C / °F).
- ⏻ Long press to turn the device on/off. Short press in FM mode to search and save FM channels automatically. Short press in Bluetooth mode to play/pause and answer phone calls.
- ◀️ Short press to switch to the previous track. When the light is turning on, long press to enter light timing set (4 options: 15 mins, 30 mins, 60 mins, OFF).
- ▶️ Short press to switch to the next track.
- ? Short touch to turn on/switch brightness for night light; long touch to turn off night light.
- ? Short touch to turn on/switch light mode for RGB light; long touch to turn off RGB light.
Clock Setting
- Short press ⏰ to switch between 12-hour and 24-hour system.
- Long press ⏰ to enter time setting. When numbers blink, short press ➕ or ➖ to adjust hours and minutes. Press ⏰ again to quit setting mode and save.
Alarm Clock Setting
- Short press ? to turn the alarm clock on/off. An active alarm is indicated by the ? icon on the LED display.
- Long press ? to enter alarm setting. When numbers blink, short press ➕ or ➖ to adjust hours and minutes. Short press ? again and use ➕ or ➖ to adjust alarm volume. Short press ? again and use ➕ or ➖ to select the ringtone. Short press ? once more to quit and save settings.
- Snooze Mode: When the alarm rings, it enters snooze mode if no operation occurs within 3 minutes or if the alarm key is pressed. The alarm rings for 3 minutes and repeats after 7 minutes.
- When the alarm is ringing, press any key (except the alarm key) to stop it.
Charging
Note: Charge the product fully before first use.
Plug the charging cable into the unit and connect to a USB power source (PC, MAC, USB adapter). While charging, the LED indicator shows a solid red light. The light turns off when charging is complete.
Remarks: Sound may distort when the battery is low. Please charge the unit on time.
Wake-Up Light
The night light turns on automatically 10 minutes before the alarm clock rings.
Bluetooth Connections
- The default mode is clock mode. Short press M to enter Bluetooth mode; the blinking BT icon indicates readiness for pairing.
- On a mobile device, enable Bluetooth, search for "27066" in the list of available devices, and select it. The speaker will announce successful connection, and the BT icon will light up continuously.
- After the first successful pairing, the speaker will automatically connect to the previously paired device within 10 seconds on subsequent uses. (Note: Each speaker can connect to only one Bluetooth device.)
Micro SD Card/USB
To play music from a Micro SD card or USB drive, insert the card into the slot or the drive into the USB Host. The speaker will automatically detect the input and start playing audio. Use the speaker controls to play, pause, skip tracks, and adjust volume.
AUX IN
Connect a 3.5mm audio cable from your audio device's output/headphone jack to the speaker's Aux In. The speaker will automatically switch to Aux Mode. Use your connected device's controls to select and play audio. Ensure the volume on your connected device is audible.
FM Mode
- Short press M to enter FM mode. The MHz icon on the LED display indicates successful entry.
- Short press ⏻ to automatically search and save FM channels. The search can be interrupted by short pressing ⏻. (Note: Connect an audio or USB charging cable as an antenna for better reception.)
- Short press ◀️ or ▶️ to select saved channels.
Temperature
Long press M to switch between °C (Centigrade) and °F (Fahrenheit) mode.
Light Control
- When the light is on, long press ◀️ to set the light timing to 15 mins, 30 mins, 60 mins, or OFF.
- L 15 indicates the light will turn off after 15 minutes.
LED Display
The LED display brightness will automatically reduce by half if no operation is performed within 5 minutes.
Waste Electrical and Electronic Equipment (WEEE) Information
This section provides information regarding the disposal of electrical and electronic equipment according to EU directives.
- 1. Separate Collection: WEEE must be collected separately from household waste and disposed of through designated systems.
- 2. Batteries, Accumulators, and Lamps: These must be removed from WEEE before disposal.
- 3. Return Options: WEEE can be returned free of charge to designated collection points or take-back points set up by manufacturers/distributors.
- 4. Privacy Protection: End users are responsible for deleting personal data from WEEE before disposal.
- 5. Environmental Impact: Improper disposal can negatively impact the environment and human health.
- 6. Your Role: Proper disposal contributes to reuse and material recovery.
- 7. Symbol Meaning: The crossed-out dustbin symbol ?️❌ indicates that the device must be collected separately at the end of its life cycle.
