LÖNSET Slatted Bed Base

Assembly Overview

This document provides instructions for assembling the IKEA LÖNSET slatted bed base.

Tools Required: Screwdriver [Phillips head]

Parts List:

• 1x Allen key (100006)
• 12x Screws (100229)
• 4x Screws (109049)
• 4x Washers (100823)

Assembly Steps:

1. Step 1

   Attach the side rails to the end pieces using the provided screws (100229) and Allen key (100006). Ensure the slats are facing the correct direction. (See diagram showing correct and incorrect placement of slats).

   Diagram Description: Shows the assembly of the frame with slats. Close-up views illustrate how the slats should be inserted into the frame.

2. Step 2

   Attach the central support beam(s) to the frame using screws (100229) and washers (100823). Ensure the frame is square and stable. (See diagram showing correct screw placement and a crossed-out image indicating incorrect placement).

   Diagram Description: Shows the attachment of the central support beam to the assembled frame. Close-up views detail the screw and washer placement.

3. Step 3

   Insert the slatted bands into the designated slots on the frame. Ensure the bands are evenly spaced and taut. (See diagram showing the insertion of the bands and close-up views of the mechanism).

   Diagram Description: Illustrates how to insert the flexible slatted bands into the frame. Close-up views show the correct way to secure the bands.

4. Step 4

   Continue inserting the slatted bands across the width of the bed base. Ensure all bands are properly seated. (See diagram showing the process and close-up views of the band insertion).

   Diagram Description: Continues the process of inserting the slatted bands, showing the even distribution and secure fitting.

5. Step 5

   Check the tension and alignment of all slats. Make any necessary adjustments to ensure a level and supportive surface. (See diagram showing correct and incorrect slat alignment).

   Diagram Description: Visual check of the assembled slatted base for proper alignment and tension. Incorrect alignment is shown with a cross symbol.

6. Step 6

   Secure any remaining components or reinforce the structure if indicated by the diagrams. (See diagram showing final securing points).

   Diagram Description: Final step showing any additional securing points or reinforcement.

7. Step 7

   Attach the bed base to the bed frame using the remaining screws (109049) and washers (100823). Ensure the bed base is centered and securely fastened. (See diagram showing the attachment process with screws and washers).

   Diagram Description: Illustrates attaching the completed slatted bed base to the bed frame using screws and washers.

8. Step 8

   Place the mattress onto the assembled slatted bed base. (See diagram showing the mattress being placed on the base).

   Diagram Description: Shows the final step of placing a mattress onto the assembled LÖNSET slatted bed base.

Important Information:

• Ensure all parts are accounted for before beginning assembly.
• Follow the steps in the order presented.
• Do not overtighten screws.
• For assistance, refer to the IKEA website or contact IKEA customer service.