LINDÅSEN Display Shelf
Important Safety Information
⚠️ WARNING: Furniture tipping can cause serious or fatal crushing injuries. To prevent this furniture from falling, it must be permanently fixed to the wall.
Assembly should be carried out by a qualified person, as incorrect assembly can lead to the furniture falling and causing injury or damage.
Fastening devices for the wall are not included, as different wall materials require different types of fastening devices. Use fastening devices suitable for the walls in your home. Assess the suitability of the wall to ensure that the fastening devices will withstand the forces generated. For advice on suitable fastening devices, contact your local specialized dealer.
Safety warnings are provided in multiple languages throughout this document, all emphasizing the critical need for secure wall anchoring to prevent serious injury or death.
Assembly Steps
- Step 1: Prepare the components. Identify the bracket (part 100001) and screws (part 10093087). Attach the bracket to the side panel using one screw and the provided tool.
- Step 2: Connect the side panels to the base frame. Use three screws (part 10093087) and the tool (part 100001) for each connection. Ensure correct orientation; incorrect assembly can lead to furniture tipping and cause injury or damage.
- Step 3: Insert four dowels into the designated holes on the frame pieces.
- Step 4: Attach the vertical support pieces to the base frame. Use four screws to secure them in place.
- Step 5: Attach the top frame to the vertical supports. Use four screws (part 10093087) and the tool (part 100001) for each connection.
- Step 6: Carefully place the shelves into the assembled frame, ensuring they are seated correctly.
Parts Included
- 8 x Screws (Part Number: 10093087)
- 1 x Assembly Tool (Part Number: 100001)
