KALKGRUND
Glass Shelf
Important Information Regarding Wall Mounting
As wall materials vary, screws for fixing to the wall are not included with this product. For advice on suitable screw systems and wall fixings, please consult your local specialised dealer or hardware store.
Assembly Instructions
Tools Required:
- Pencil
- Spirit level
- Screwdriver
- Allen key (provided)
Note: Wall mounting screws and plugs are sold separately and must be chosen based on your specific wall type.
Step 1: Attach Brackets to Shelf
Take the glass shelf and two shelf brackets (part 146042). Use the provided Allen key (110084) to attach the brackets to the sides of the glass shelf.
Step 2: Secure Brackets
Ensure the Allen key is turned correctly to firmly secure the brackets to the glass shelf.
Step 3: Mark Wall Positions
Position the assembled shelf unit against the wall at your desired location. Use a pencil to mark the points on the wall where the screw holes of the brackets align.
Step 4: Mount Brackets to Wall
Drill holes at the marked positions on the wall. Insert appropriate wall plugs (not included) into the drilled holes. Then, attach the shelf brackets to the wall using suitable screws (not included), ensuring they are securely fastened.
Step 5: Attach Shelf Supports
Slide the shelf supports onto the mounted wall brackets.
Step 6: Secure Shelf Supports
Use the provided Allen key (110084) to secure the shelf supports to the wall brackets.
Step 7: Final Tightening
Insert a screw (part 143102) into each shelf support and tighten it with a screwdriver to ensure the supports are firmly attached to the brackets. Verify correct screw insertion.
Step 8: Place Glass Shelf
Carefully place the glass shelf onto the two secured shelf supports.
Step 9: Secure Glass Shelf
Use two screws to fasten the glass shelf to the shelf supports, completing the installation.
