KUNGSFORS Wall Shelf Installation Guide
Important Safety Information
⚠️ WARNING: Serious or fatal crushing injuries can occur from furniture falling down. To prevent this, the furniture must be secured to the wall using the provided wall attachment devices. Screws and plugs for the wall are not included, as they must be suitable for your specific wall material and intended load. If you are uncertain, seek professional advice. Read and follow each step of the instructions carefully.
Tools and Parts Required
Tools:
- ✏️ Pencil
- ? Screwdriver
- ? Spirit Level
- ? Hammer (if needed for wall plugs)
Parts Included:
| Item | Quantity | Part Number |
|---|---|---|
| Shelf Bracket Screw | 4x | 115294 |
| Wall Mounting Bracket | 2x | 158580 (type) |
Assembly Instructions
Step 1: Attach Brackets to Shelf
Lay the shelf flat. Align the two shelf brackets (part 158580 type) with the pre-drilled holes on the underside of the shelf. Secure each bracket using two screws (115294), for a total of four screws. Ensure correct orientation (indicated by a circle ✔️) and avoid incorrect placement (indicated by a cross ❌).
Step 2: Position and Level Shelf
Hold the assembled shelf against the wall at the desired height. Use a spirit level (?) to ensure the shelf is perfectly horizontal. Mark the positions for the wall mounting brackets on the wall.
Step 3: Attach Wall Mounting Brackets
Attach the two wall mounting brackets (158580 type) to the wall at the marked positions. Ensure the brackets are oriented correctly (refer to diagrams for correct ✔️ and incorrect ❌ orientation). Use appropriate screws and wall plugs suitable for your wall type (not included). If unsure, consult a professional.
Step 4: Mount Shelf to Wall
Carefully lift the assembled shelf and align its integrated brackets with the wall mounting brackets. Slide the shelf's brackets onto the wall brackets. Secure the shelf by inserting screws through the shelf brackets into the wall brackets. Ensure the shelf is firmly attached.
Note: The diagrams also show alternative mounting methods, such as attachment to vertical support rails common in the KUNGSFORS system. These instructions focus on direct wall mounting.
