Important Information
⚠️ Important: Screws and fixings for attaching the shelf to the wall are not included. As wall materials vary, it is essential to use screws and fixings that are suitable for your specific wall type. For advice on appropriate screw systems, please consult your local specialised dealer.
Tools Required
The following tools are recommended for assembly:
- Screwdriver
- Pencil (for marking)
- Spirit level (for ensuring the shelf is straight)
- Tape measure (for accurate placement)
Parts Included
The following parts are included in the package:
- 1x Mounting bracket (part number 10123972)
- 2x Screws for attaching the unit to the bracket (part number 10123090)
Note: Wall mounting hardware is not included.
Assembly Steps
Step 1: Mark Wall Placement
Using a tape measure and spirit level, mark two points on the wall that are 29 cm (11 1/2 inches) apart. Ensure these marks are level. These points indicate where the mounting bracket will be fixed.
Step 2: Attach Mounting Bracket
Secure the mounting bracket (10123972) to the wall at the marked locations using appropriate wall fixings (not included). Ensure the bracket is firmly attached. A diagram shows a suitable screw for wall mounting, indicating that other types may not be appropriate.
Step 3: Mount the Unit
Align the SKOGSMOSAIK unit with the attached wall bracket. Use the two included screws (10123090) to fasten the unit securely to the bracket. The diagram shows the screws being inserted through the unit into the bracket.
Step 4: Install Shelves
Insert the shelves into the desired positions within the pegboard backing of the unit. The diagram illustrates how the shelves slide into place.
Weight Limits
⚠️ Important Safety Information:
- Maximum weight capacity for each upper shelf: 1 kg (2 lb)
- Maximum weight capacity for the bottom section: 2 kg (4.5 lb)
