Victrola Rock Speakers

Safety Instructions

Please read all operating instructions carefully before using the unit. These are general precautions and may not pertain to your specific unit.

[warning symbol] The lightning flash with arrowhead within an equilateral triangle is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock.

[caution symbol] The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

CAUTION: RISK OF ELECTRIC SHOCK DO NOT OPEN

To prevent risk of electric shock, do not remove the cover or back. No user-serviceable parts inside. Refer servicing to qualified service personnel.

General Safety Precautions:

• Keep these instructions for future reference.
• Heed all warnings on the product and in the manual.
• Follow all operating and use instructions.
• Do not use the apparatus near water or moisture (e.g., near a bathtub, sink, laundry tub, wet basement, or swimming pool).
• Do not expose the product to dripping or splashing. Do not place liquid-filled objects on the product.
• Clean only with a slightly moist, lint-free cloth. Unplug the product before cleaning. Do not use liquid or aerosol cleaners.
• Do not block ventilation openings. Install according to manufacturer's instructions. Openings ensure reliable operation and protect from overheating; do not cover them with surfaces like beds or sofas. Keep away from radiators or heat sources.
• Do not install near heat sources such as radiators, heat registers, stoves, or other heat-producing apparatus.
• Do not defeat the safety purpose of polarized or grounding-type plugs. Consult an electrician for outlet replacement if the plug does not fit.
• Protect the power cord from being walked on or pinched.
• Only use manufacturer-specified attachments/accessories.
• Use only with manufacturer-specified carts, stands, tripods, brackets, or tables. Use caution when moving combinations to avoid tip-over injuries.
• Unplug during lightning storms or when unused for long periods.
• Refer all servicing to qualified service personnel for damage, power cord issues, liquid spills, abnormal operation, or drops.
• Operate only from the indicated power source type. Consult your dealer or local power company if unsure.
• Outside antenna systems should not be near overhead power lines or electric circuits; extreme care is needed to avoid contact, which could be fatal.
• Do not overload wall outlets or extension cords, as this can cause fire or electric shock.
• Never push objects into the product, as they may touch dangerous voltage points or short out parts. Never spill or spray liquid on the product.
• Do not attempt to service the product yourself; opening covers may expose you to dangerous voltage.
• When replacement parts are required, ensure the technician uses manufacturer-specified parts with the same characteristics as the original. Unauthorized substitutions may result in fire, electric shock, or other hazards.
• Upon service completion, ask the technician to perform safety checks.
• Unplug and refer servicing for: damaged power cord/plug, spilled liquid/fallen objects, exposure to rain/water, abnormal operation, dropped product, distinct change in performance.
• Warning: Batteries (installed or pack) shall not be exposed to excessive heat such as sunshine, fire, or similar sources.
• CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.
• Marking information is located at the bottom of the apparatus.
• Warning: Refer to exterior bottom enclosure for electrical and safety information before installing or operating.
• Caution: Use of controls or procedures other than those specified may result in hazardous radiation exposure. If the product develops trouble, contact qualified service centers and do not use it in a defective state.

Product Specifications

NOTE: As a result of continual improvements, the design and specifications of this product are subject to change without notice.

Made in China.

Bluetooth is a registered trademark of Bluetooth SIG, Inc. Other trademarks and trade names are those of their respective owners.

Buttons & Controls

The product includes two rock-shaped speakers. The side panel of one speaker features a waterproof cover.

The side panel, under the waterproof cover, displays the following controls and indicators:

• 1. Speaker: The main audio output component.
• 2. Side Panel: The location of the unit's controls and ports.
• 3. Power Button: Press and hold for 3 seconds to turn the unit ON or OFF.
• 4. Reset Function Pinhole: Use a paperclip to press this for a few seconds to reset the speaker to its original factory settings.
• 5. Blue Bluetooth LED Indicator: Shows the Bluetooth connection status. Blinks slowly when searching, solid blue when paired.
• 6. Red Charging LED Indicator: Indicates the charging status. Remains lit while charging, turns blue when charging is complete.
• 7. 5V Input Port: Micro USB port for connecting the charging cable.

Operation

Overview

1. Before first use, charge the speakers for approximately 6 hours.
2. The Outdoor Bluetooth Rock Speakers must automatically pair together before syncing to a Bluetooth device.

Turning the Unit ON

1. On each speaker, press and hold the Power Button for 3 seconds.
2. On one speaker, quickly press the Power Button once. On the second speaker, quickly press it twice.
3. The speakers will automatically pair. Allow 5-10 seconds for pairing.
4. An audible tone will play on both speakers when they are synced.

Connecting an External Device via Bluetooth

1. After pairing, the speakers will search for a Bluetooth device. The Bluetooth LED Indicator will blink slowly.
2. Activate the Bluetooth function on your external device.
3. Select "The Rock" on your device to begin pairing. An audible beep signifies pairing, and the Bluetooth LED indicator will remain solid Blue.
4. Begin playing music.

Note: Familiarize yourself with your device's Bluetooth capabilities. Obstacles can reduce operational range. Keep the unit away from devices that may cause interference. If prompted for a password or PIN, enter "0000."

Turning the Unit OFF

1. Press and hold the Power Button for 3 seconds to turn OFF both speakers.

NOTE: The speakers will enter standby mode automatically after 5 minutes of inactivity.

Battery Charging

1. Recharge the internal battery using the supplied Micro USB Cable connected to the DC 5V Input port. Connect the other end to a PC or the included 5V, 2A power adapter.
2. The Red Charging LED indicator stays lit during charging and turns Blue when charging is complete. Charging takes 5-6 hours.

Note: If the unit has not been used for a long period, the battery may be in "sleep mode." To initialize, charge for longer than 6 hours but DO NOT exceed 24 hours. Battery life varies with usage. Loud music with heavy bass drains the battery faster.

Caution: The built-in rechargeable battery is not replaceable. Do not remove, replace, throw in trash or fire, or dispose of in standard garbage sites. Dispose of device at available Battery Recycling Sites [battery recycling symbol]. Not doing so may violate local disposal laws. Refer to local regulations for proper battery disposal.

Troubleshooting

1. STATIC DISTURBANCE: If sound quality issues (distortion, breaks, interference) occur, ensure all devices (your Bluetooth device and both speakers) are within a 33-foot range of each other. Move devices closer to resolve. A diagram illustrates the recommended Bluetooth range, showing devices within 33 feet of each other.
2. ONLY ONE SPEAKER IS CONNECTED: If sound plays from only one speaker, the initial Bluetooth connection may have failed or speakers didn't have enough time to pair. Turn OFF your speakers and Bluetooth device. After a few moments, turn ON speakers and allow 5-10 seconds to pair. Once the audible tone plays, reconnect to your Bluetooth device. Both speakers should connect and play music.
3. STATIC PLAYBACK FROM LAPTOP: If sound quality issues occur, the Bluetooth Connection Window on your device might be causing interference. Close the Bluetooth Connection Window on your Mac or PC. Continue playing music; sound quality should return to normal. Screenshots show typical Bluetooth connection windows for Mac and PC.
4. TO RESET THE SPEAKERS: If the speaker malfunctions, turn it OFF for a few minutes, then turn it ON. If it continues to malfunction, use a paperclip to press the Reset Function Pinhole on the Side Panel to reset to original factory settings. Refer to the Buttons and Controls Diagram on Page 3.
5. WATERPROOF RESISTANCE: Each speaker has an IPX4 waterproof level, suitable for water splashing conditions (e.g., near sprinklers, pools, outdoor areas). DO NOT fully submerge speakers in liquid. If the product becomes significantly wet, dry it thoroughly before use.

Important Information

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to two conditions: (1) it may not cause harmful interference, and (2) it must accept any interference received, including interference that may cause undesired operation.

NOTE: This equipment has been tested and found to comply with Class B digital device limits, pursuant to Part 15 of FCC Rules. These limits provide reasonable protection against harmful interference in residential installations. This equipment generates, uses, and can radiate radio frequency energy. If not installed and used per instructions, it may cause harmful interference to radio communications. No guarantee exists that interference will not occur in a particular installation. If interference occurs, users are encouraged to correct it by:

• Reorienting or relocating the receiving antenna.
• Increasing the separation between the equipment and receiver.
• Connecting the equipment to a circuit different from the receiver's.
• Consulting a dealer or experienced radio/TV technician.

WARNING: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment.

NOTE: This user manual provides proper instructions, usage restrictions, and special usage conditions that comply with SAR and RF field strength limits. Users should carefully study the manual before use.

INDUSTRY CANADA:

This equipment complies with Industry Canada license-exempt RSS standard(s). Operation is subject to two conditions: (1) this device may not cause interference, and (2) it must accept any interference, including interference that may cause undesired operation.

Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.

RF Warning Statement:

This equipment complies with FCC radiation exposure limits for an uncontrolled environment. Install and operate with minimum distance 20cm between the radiator and your body.

Warranty Statement

United States

Victrola (Innovative Technology Electronics, LLC) warrants this product to be free from defective materials and workmanship for one (1) year from the date of purchase, subject to limitations. This warranty period is not extended if the product is replaced.

To obtain replacement, contact the dealer with your original receipt. If dealer assistance is impossible, contact customer service at victrola.com/contact. If the product proves defective, Victrola will replace it at no charge. If the model is unavailable or cannot be replaced identically, Victrola will issue a merchandise credit for the purchase price redeemable at victrola.com.

Limitations:

• Does not cover failure from improper installation, storage, transportation, misuse, abuse, accident, neglect, mishandling, unauthorized repair, modification, or wear from ordinary use or environmental deterioration.
• Does not cover cosmetic damage (e.g., paint damage) or consequential damage to other components.
• Null and void for products not used per Victrola's instructions.
• Terminates if the original retail purchaser sells or transfers the product.
• Null and void for defects caused by installation or repair by unauthorized personnel.

This warranty grants specific legal rights, which may vary by location. Implied warranties of merchantability and fitness for a particular purpose are limited to the warranty term. Some locations may not allow exclusion of implied warranties, so limitations may not apply. Victrola's liability is limited to replacement or repair. Victrola does not accept liability for special, punitive, consequential, or incidental damages. Maximum liability is limited to the purchase price paid for the product.

Canada and US Territories

Warranty complies with applicable law for consumers in Canada or US Territories. To obtain service, contact the dealer with your original receipt. If dealer assistance is impossible, contact customer service at victrola.com/contact. Victrola will replace defective products at no charge. If the model is unavailable or cannot be repaired/replaced identically, Victrola may replace it with a current model of equal or greater value.

Outside the U.S, Canada, and US Territories

Warranty complies with applicable law for consumers outside these regions. To obtain service, contact the dealer or distributor with your original receipt.