Victrola M1 Monitors

Overview

Back View

The back panel of the M1 Monitors features the following connections and controls:

• SP-L Port: For connecting the left monitor to the right monitor.
• Power Switch: To turn the unit ON or OFF.
• AC Power Port: For connecting the power cable.
• Function Knob: Used for power control, volume adjustment, and cycling through input modes.
• SUB-OUT Port: For connecting an optional subwoofer.
• RCA Ports: For analog audio input (e.g., from turntables, CD players).
• AUX-In Port: For auxiliary audio input (e.g., from smartphones, MP3 players).

Connection Diagram Description: An illustration shows how to connect the two monitors using the provided black speaker cable, with arrows indicating the connection points.

Quick Start Guide

Function Knob - Basic Operation

• POWER: Press and hold the Function Knob for 1-2 seconds to turn the unit ON or OFF.
• VOLUME: Rotate the Function Knob to raise or lower the volume.

Function Knob - To Cycle Through Features

• ANALOG MODE (AUX-IN/RCA-IN): Press the Function Knob to play audio from a connected auxiliary device.
• BLUETOOTH: Press the Function Knob to pair the unit with a Bluetooth device (e.g., smartphone).

Operation Modes and Prompts

Simple Setup

Getting Started - Basic Operation

With the master power switch in the ON position, press and hold the Function Knob for 1-2 seconds to power on the monitors. Press the Function Knob to cycle through the following playing modes:

• BLUETOOTH: Connect and play music from a Bluetooth device (smartphone).
• ANALOG (AUX-IN / RCA-IN): Connect and play music from external devices (turntables, computers, and more).

Wired Connection

• RCA OUTPUT: Use an RCA audio cable to connect a turntable or other stereo device with an RCA output.
• AUX-IN: Use an AUX cable (included) to connect a turntable, smartphone, or other device with an AUX OUT port.
• SUB-OUT: If you have purchased an S1 Subwoofer (sold separately), use the subwoofer Y cable included in the S1. Connect the single RCA end of the subwoofer cable into the SUB-OUT on the M1 Monitors and connect the split RCA ends to the RCA IN ports on the S1 Subwoofer. Alternatively, a single RCA subwoofer cable (sold separately) can be used to connect to the single SUB-IN port on the S1.

Bluetooth Pairing

BLUETOOTH: Connect and play music from a Bluetooth device (Smartphone).

1. Turn the unit ON.
2. Simply press the Function Knob to ensure it is in Bluetooth mode (the LED will flash blue).
3. On your device, turn Bluetooth ON. Then search for or select "M1 Monitors" in the settings menu.
4. Once connected to the M1 Monitors, the Dial will turn a steady Blue.
5. Once a device is paired, it will automatically connect each time you enter Bluetooth mode if it is nearby.

Note: Make sure the unit is within 10 meters (33 ft.) from your external device for the strongest connection.

Speaker Grill Removal

To detach the magnetic speaker grill from the Monitors, simply hold the corners of the grills and slide it off from the Monitor. The grill can easily be put back on by matching the corners of the grill to the Monitors and letting the magnets snap into place.

[Illustration description: The process involves holding the grill corners and sliding it off the monitor. Reattachment is done by aligning corners and allowing magnets to connect.]

Specifications

General

• Power Requirements: AC 100-240V~50/60HZ
• Power Consumption: 60 W
• Speaker: 2" Tweeter x2 + 4" Woofer x2
• Dimensions (W x D x H): 156mm x 191mm x 228mm (approx)
• Weight: 4.75 kgs

Bluetooth

• Bluetooth Version: Bluetooth V5.0
• Bluetooth Profiles: A2DP, AVRCP
• Bluetooth Frequency range: 2.402GHz-2.480GHz
• Operating Distance: 10 meters (33 ft.)

Included

• M1 Monitors
• AUX Cable
• RCA Cable
• Power Cable
• Instruction Manual
• Quick Setup Guide

Warnings and Safety Information

Important Safety Instructions

1. Read these instructions – All the safety and operating instructions should be read before this product is operated.
2. Keep these instructions – The safety and operating instructions should be retained for future reference.
3. Heed all warnings – All warnings on the appliance and in the operating instructions should be adhered to.
4. Follow all instructions – All operating and use instructions should be followed.
5. Do not use this apparatus near water – The appliance should not be used near water or moisture – for example, in a wet basement or near a swimming pool, and the like.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
9. Protect the power cord from being walked on or pinched particularly at the plugs, convenience receptacles, and at the point where they exit from the apparatus.
10. Only use attachments/accessories specified by the manufacturer.
11. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
12. Unplug the apparatus during lightning storms or when unused for long periods of time.
13. Refer all servicing to qualified personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, has been exposed to rain or moisture, does not operate normally, or has been dropped.

Symbol Descriptions:

• CAUTION/ATTENTION: RISK OF ELECTRIC SHOCK, DO NOT OPEN. / ATTENTION RISQUE DE CHOC ÉLECTRIQUE, NE PAS OUVRIR ⚠️ (Lightning flash with arrowhead symbol within an equilateral triangle indicates the presence of non-insulated "dangerous voltage" that may constitute a risk of electric shock. Warning: To reduce the risk of electric shock, do not remove cover or back, as there are no user-serviceable parts inside. Refer servicing to qualified personnel.)
• CAUTION/ATTENTION: ❗ (Exclamation point within an equilateral triangle alerts the user to the presence of important operating and maintenance instructions.)

This equipment is a Class II or double insulated electrical appliance and does not require a safety connection to electrical earth.

The mains plug is used as the disconnect device and shall remain readily operable.

WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. The apparatus shall not be exposed to dripping or splashing, and no objects filled with liquids, such as vases, shall be placed on the apparatus.

Use the equipment in moderate climate.

WARNING: Please refer to the information on the exterior bottom/back enclosure for electrical and safety information before installing or operating the apparatus.

Ventilation should not be impeded by covering the ventilation openings with items such as newspaper, table-cloths, curtains, etc.

No naked flame sources, such as lighted candles, should be placed on the apparatus.

Do not install this equipment in a confined space such as a bookcase or similar unit.

Safety Information (Before Use)

1. To shut off power completely, unplug the power cord from the wall outlet. Unplug the unit if not used for an extended period (e.g., vacation).
2. Use of controls or procedures other than specified may result in hazardous radiation exposure.
3. To prevent electric shock, match the wide blade of the plug to the wide slot and insert fully.
4. If problems occur during operation, contact qualified service centers and do not use the product in defective states.

Before Use

1. Choose installation location carefully: Avoid direct sunlight, heat sources, vibrations, excessive dust, cold, or moisture. Keep away from humming sources like transformers or motors.
2. Do not open the cabinet, as this may damage circuitry or cause electrical shock. If a foreign object enters the set, contact Customer Service.
3. Do not handle records with dirty fingers. Never play a record with a crack on the surface.
4. When removing the power plug, always pull directly on the plug, never the cord.
5. To protect the stylus, use the white protective needle cover after use.
6. Do not clean the unit with chemical solvents, as this might damage the finish. Use a clean, dry cloth.
7. Keep this manual in a safe place for future reference.

Regulatory Information

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

WARNING: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment.

The device must not be co-located or operating in conjunction with any other antenna or transmitter. To maintain compliance with the FCC's RF exposure guidelines, place the product at least 20cm from nearby persons.

Industry Canada Statement

Declaration of IC regarding radiation exposure: This equipment complies with Canada's radiation exposure limits for uncontrolled environments. This equipment must be installed and used with a minimum distance of 20 cm between the antenna and your body. This transmitter must not be co-located or operated with any other antenna or transmitter.

This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Son fonctionnement est sujet aux deux conditions suivantes: (1) le dispositif ne doit pas produire de brouillage préjudiciable, et (2) Ce dispositif doit accepter tout brouillage reçu, y compris un brouillage susceptible de provoquer un fonctionnement indésirable.

Warranty Information

Victrola is a registered trademark of Innovative Technology Electronics, LLC.

United States

Victrola (Innovative Technology Electronics, LLC) warrants to the original retail purchaser that this product will be free from defective materials and workmanship for one (1) year from the date of purchase, subject to the limitations below. This warranty period is not extended if Victrola replaces the product.

To obtain a replacement under the terms of this warranty, contact the dealer from which it was purchased with your original receipt. If assistance from the dealer is impossible, contact Victrola customer service for warranty assistance at victrola.com/contact.

Except as limited below, if the product proves defective in material or workmanship within one (1) year from the date of purchase, Victrola will replace the product at no charge. If the product model is no longer available and cannot be replaced with an identical model, Victrola will issue a merchandise credit for the purchase price to be redeemed at victrola.com.

Limitations:

• This limited warranty does not cover failure arising from improper installation, storage, transportation, misuse, abuse, accident, neglect, mishandling, unauthorized repair, modification, or wear from ordinary use or environmental deterioration.
• This limited warranty does not cover cosmetic damage, including paint damage, or consequential damage to other components or premises resulting from product failure.
• This limited warranty is null and void for products not used in accordance with Victrola's instructions.
• This limited warranty terminates if the original retail purchaser sells or otherwise transfers the product.
• This limited warranty is null and void for defects or damage caused by installation or repair performed by any person or entity other than a Victrola authorized installer or dealer.

This warranty gives you specific legal rights, and you may also have other rights which vary by state, jurisdiction, or country. All express and implied warranties for the product, including implied warranties of merchantability and fitness for a particular purpose, are limited in time to the term of this warranty. Some states/jurisdictions/countries do not allow the exclusion or limitation of certain implied warranties or conditions, so this limitation may not apply to you. Victrola's responsibility for malfunctions and defects in hardware is limited to replacement or repair as set forth in this warranty statement. Victrola does not accept liability for special, punitive, consequential, or incidental damages or losses, whether direct or indirect, including liability for third-party claims or for products not being available for use. The maximum liability for which Victrola may be responsible will be no more than the amount paid for the product.

Canada and US Territories

The warranty on this product shall comply with applicable law when sold to a consumer in Canada or a US Territory. To obtain any applicable warranty service, contact the dealer from which you purchased the product, or the distributor that supplied the product, with your original receipt. If assistance from the dealer is impossible, contact customer service for warranty assistance at victrola.com/contact.

If this product proves defective in material or workmanship, Victrola will replace it at no charge. If the product model is no longer available and cannot be repaired or replaced with an identical model, Victrola may, at its sole option, replace the unit with a current model of equal or greater value.

Outside the U.S., Canada, and US Territories

The warranty on this product shall comply with applicable law when sold to a consumer outside the United States, Canada, and US Territories. To obtain any applicable warranty service, contact the dealer from which you purchased the product, or the distributor that supplied the product, with your original receipt.