Nova Life Bino Interior Pendant - Instructions Manual

Package Contents

(Parts are not to scale)

Light Source

Max. LED 19W 1400 Lumen 3000K (Dimmable)

Lamp guarantee: 3 years, LED lifetime: 25000 hours

Care and Cleaning

Exterior Maintenance

1. To clean the outside of the fixture, use a dry or slightly dampened clean cloth (use clean water, never a solvent) to wipe the surface of the fixture.
2. Do not use any cleaners with chemicals, solvents or harsh abrasives. Use only a dry soft cloth to dust or wipe carefully.

Pre-Installation

Planning the Installation

Read all instructions before assembly and installation. Before starting installation of the fixture or removal of a previous fixture, disconnect the power by turning off the circuit breaker or by removing the fuse at the fuse box. To avoid damaging this product, assemble it on a soft, non-abrasive surface such as carpet or cardboard.

Tools Required

• Phillips Screwdriver
• Flathead Screwdriver
• Knife
• Wire Cutter
• Percussion drill
• Chopping bit Dia 6 mm
• Ladder
• Safety Goggles

Installation

(Make sure to turn off the main power)

Step 1

Secure the mounting bracket to the ceiling using the provided screws and wall expansion particles.

Step 2

Connect the wires: connect the supply wire to the fixture wire using the terminal box. Ensure correct polarity (N for neutral, L for live).

Step 3

Attach the fixture body to the mounting bracket.

Step 4

Height adjustment: Adjust the desired height of the pendant by following the indicated mechanism.

Installation (continued)

Step 1

Mounting the fixture to the ceiling, ensuring it is securely attached.

Step 2

Connecting the electrical wires within the terminal box.

Step 3

Securing the fixture to the mounting bracket.

Step 4

Adjusting the height of the pendant light.

Operation

• Turn on power at the circuit breaker or fuse box.
• Turn the light switch on to activate the fixture.