Step 1: Preparation
Prepare the fixture and necessary accessories for fitting to the Track-spot-pendel-feste (models 50427-000-53/50427-000-71). This guide provides an example applicable to spot lights or pendant lights, but not limited to the illustrated item.
Diagram Description: Shows a lighting fixture, a track connector, and various components, indicating readiness for assembly.
Step 2: Open Cover and Thread Wire
Unfasten the countersunk screw to open the cover. Thread the fixture's wire through the threaded tube to the connection point of the Track-spot-pendel-feste.
Diagram Description: Illustrates unscrewing a screw to detach a cover, and then passing the fixture's wire through a threaded tube connected to the track fitting. Labels indicate 'wire', 'Threaded tube', 'cover', and 'Countersunk screw'.
Step 3: Attach Fixture to Track
Fix the fixture firmly onto the Track-spot-pendel-feste. Separate the L, E, and N wires.
Diagram Description: Shows the fixture attached to the track connector, with the wires (labeled N, E, L) separated and ready for connection.
Step 4: Loosen Connection Screws
Unfasten the L, E, N screws halfway on the Track-spot-pendel-feste, but do not remove the screws.
Diagram Description: Shows the track connector with the connection screws (L, E, N) loosened but still in place.
Step 5: Connect Wires
Insert the fixture's L, E, N wires into the corresponding terminals on the Track-spot-pendel-feste and fasten them firmly.
Diagram Description: Shows the fixture wires being connected to the L, E, N terminals of the track connector. A close-up view indicates the correct wire placement.
Step 6: Secure Cover
Place the cover back on and fasten the countersunk screw to complete the fixture assembly.
Diagram Description: Shows the cover being placed back onto the fixture and secured with the countersunk screw.
Step 7: Mount Fixture to Track
Snap the fixture onto the track and lock it firmly.
Diagram Description: Shows the assembled fixture being attached and securely locked onto the track.
