Neewer Smart Metal LED Light Instruction Manual
Models: RGB530 PRO, RGB660 PRO
Functions
Control the LED Light Via APP
Modes: [Lightning] ⚡, [Screen] ?, [Candlelight] ?️, [Traffic Light] ?, [Camera Flash] ?, [Explosion] ?, [Paparazzi] ?, [TV] ?, [Fire] ?, [Fireworks] ?, [Police Car] ?, [Music Sync] ?
Installation Procedures
Installing the U-shaped Bracket:
- Attach the U-shaped bracket to the light body.
- Secure the bracket using the provided knobs.
Installing the Diffuser:
- Slide the diffuser onto the front of the light.
- Ensure it is securely in place.
Installing the Barndoors:
- Attach the barndoors to the sides of the light.
- Adjust the flaps as needed to shape the light.
Product Parameters
| Parameter | RGB530 PRO | RGB660 PRO |
|---|---|---|
| LED Quantity | 528PCS | 660PCS |
| CRI | 97+ | 97+ |
| Brightness Adjustment Range | 0-100 | 0-100 |
| Saturation | 0-100 | 0-100 |
| Hue | 0-360 | 0-360 |
| Color Temperature | 3200-5600K | 3200-5600K |
| Illuminance (100% Brightness, 4400K, without diffuser) | 5700LUX@0.5M, 1800LUX@1M | 7000LUX@0.5M, 2200LUX@1M |
| Input Voltage | DC 12-15V | DC 12-15V |
| Power | 45W | 50W |
| Dimensions | 232*200*50mm | 232*200*50mm |
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
RF Radiation Exposure Limits:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
Manufacturer Information
Shenzhen Neewer Technology Co., Ltd.
UK REP: Papatuzzi
