NEEWER TL21C RGB Stick Light

Product Overview

This product is a compact RGB stick light featuring two built-in 2550mAh lithium batteries and magnetic adsorption capabilities. It supports CCT dual color temperature mode, HSI color mode, and FX scene mode, and is controllable via a mobile application.

Product Introduction

The NEEWER TL21C features the following components:

• 1. 1/4 inch Screw Hole: For mounting on tripods or light stands.
• 2. Light Emitter: The main LED light source.
• 3. Display Screen: Shows current settings and mode.
• 4. Type-C Charging Port: For charging the internal battery.
• 5. Parameter "-" Key: Decreases values.
• 6. Parameter Switch Key: Cycles through adjustable parameters.
• 7. Parameter "+" Key: Increases values.
• 8. Power/Mode Switch Key: Turns the light on/off and switches between main modes.

Holding the [Up Arrow] and [Down Arrow] buttons allows for quick adjustments of selected parameters.

Package Contents

• Stick Light x1
• Charging Cable x1
• User Manual x1

Installation Instructions

Magnetic Adsorption

Attach the light directly to a ferrous surface using its magnetic back.

Charging

Use the Type-C charging cable to connect to a 5V/2A or 9V/2A power source. The charging indicator lights up sequentially during charging and remains lit when charging is complete.

Usage Instructions

Power On/Off and Mode Switching

1. Long press the [Power/Mode Key] to turn the LED light on/off.
2. Short press the [Power/Mode Key] to switch between different operational modes (e.g., CCT, HSI, FX).

Brightness Adjustment

In any mode, short press the [Parameter Switch Key]. If the [Indicator] symbol points to the brightness value, use the [Up Arrow] and [Down Arrow] buttons to adjust brightness.

Color Temperature Adjustment (CCT Mode)

1. Short press the [Power/Mode Key] to switch to CCT mode.
2. Short press the [Parameter Switch Key]. If the [Indicator] symbol points to the color temperature value, use the [Up Arrow] and [Down Arrow] buttons to adjust the color temperature.

RG Correction Value Adjustment (CCT Mode)

1. Short press the [Power/Mode Key] to switch to CCT mode.
2. Short press the [Parameter Switch Key]. When the [Indicator] symbol points to the GM value, use the [Up Arrow] and [Down Arrow] buttons to adjust the Red and Green correction values.

Hue Adjustment (HSI Mode)

1. Short press the [Power/Mode Key] to switch to HSI mode.
2. Short press the [Parameter Switch Key]. If the [Indicator] symbol points to "H" (Hue), use the [Up Arrow] and [Down Arrow] buttons to adjust the hue.

Saturation Adjustment (HSI Mode)

1. Short press the [Power/Mode Key] to switch to HSI mode.
2. Short press the [Parameter Switch Key]. If the [Indicator] symbol points to "S" (Saturation), use the [Up Arrow] and [Down Arrow] buttons to adjust the saturation.

Scene Mode (FX Mode)

1. Short press the [Power/Mode Key] to switch to FX mode.
2. Short press the [Parameter Switch Key]. When the [Indicator] symbol points to the scene mode, use the [Up Arrow] and [Down Arrow] buttons to cycle through different scene modes.

Available Scene Modes include:

• Lightning
• Paparazzi
• Bad Bubble
• Explosion
• Electric Welding
• Color Temperature Flash
• Color Pulse
• Police Car
• Candlelight
• Color Loop
• Display Screen
• Fireworks
• Party
• Color Temperature Loop
• Brightness Loop

App Control

Connect via Bluetooth to use the "NEEWER" mobile application for controlling the LED light. Refer to the "APP Guide Page" QR code on the APP prompt card for detailed instructions. Pairing is complete when the blinking [*] indicator stops.

Precautions

• Do not drop, hit, or subject the product to strong impacts, as this may cause malfunction.
• Do not look directly at the light during use. Prolonged viewing of the light source can cause eye strain and potentially harm eye health.
• Do not place the product near flammable or explosive materials.
• Do not use in rainy or humid environments.
• Always turn off the power for safety when the product is not in use.
• For long-term storage, keep the product in a well-ventilated, dry environment away from heat sources or magnetic fields.

Product Specifications