Product Overview

This document provides instructions for the VEVOR GH48 Walk-in Greenhouse Canopy. VEVOR is committed to offering tools at competitive prices. The terms "Save Half" or "Half Price" represent an estimate of potential savings compared to major brands and may not apply to all product categories. Customers are advised to verify savings carefully when placing orders.

Contact Information

NEED HELP? CONTACT US!

For product questions or technical support, please contact:

CustomerService@vevor.com

This is the original instruction. Please read all manual instructions carefully before operating. VEVOR reserves the right to interpret its user manual. The appearance of the product is subject to what you receive. VEVOR will not provide further notification for technology or software updates.

Precautions

Assembly Precautions

1. Please follow these instructions to assemble. Incorrect assembly can be a hazard.
2. Wear safety goggles and heavy-duty work gloves during assembly.
3. Do not assemble when tired or under the influence of alcohol, drugs, or medication.
4. Weight capacity and other product capabilities apply to a properly and completely assembled product only.

Use Precautions

1. This product is not a toy. Do not allow children to play with or approach this item.
2. Use as intended only. Do not sit or stand on the table.
3. Inspect before every use. Do not use it if parts are loose or damaged.
4. Use only on flat, level, and hard surfaces.
5. Do not exceed the listed weight capacity. Tighten all knobs securely before applying load. Be aware of dynamic loading! The sudden load movement may briefly create an excess load, causing product failure.

Technical Specifications

Package Contents

The package includes the following parts:

• Diagram Description: A diagram shows the components of the greenhouse canopy frame. Labeled parts include: A - Central Pole, B - Central Bottom Hub, C - Leg Cap Left, D - Leg Cap Right, E - Slider Left, F - Slider Right, G - Short Eave Assembly, H - Long Eave Assembly, I - Ceiling Assembly, J - Ceiling Support Assembly, K - Leg Assembly Left, L - Leg Assembly Right, M - M5 Bolt Kit No Nut, N - M4 Bolt Kit, O - Top Fabric-Green/White, P - Spiral Stake, Q - L Shape Stake, R - Weight Bags.

Assembly Instructions

For additional information regarding the parts, refer to the Assembly Diagram. Unwrap and separate all parts in a clear work area.

Disassembly Steps

Diagram Description: Illustrates disassembly. Step 1: Pull up all stakes from the ground (X4). Step 2: Press the push button on each leg and retract the legs (X8). Step 3: Get underneath the canopy, rotate/twist the center hub counterclockwise to unlock the frame. Step 4: Take off the PE top, lift one corner of the frame until all legs are raised off the ground except one, then push inward until the frame is fully closed.

Step 1: Opening the Canopy Frame

Lift and partially pull the canopy frame apart.

Diagram Description: Shows a collapsed frame on the left, with an arrow pointing to the frame partially expanded on the right.

WARNING: KEEP ALL FLAME AND HEAT SOURCES AWAY FROM THIS TENT FABRIC. Take care not to pinch your fingers in the frame during setup and take down. Never set up or continue to use in adverse weather conditions.

Step 2: Attaching the Canopy Top

Unfold the canopy top, unzip the door, and place it on top of the canopy frame. Avoid the peaked cap hooking the lining of the canopy top. Secure the canopy top to the corners of the canopy frame with Velcro.

Diagram Description: Top left shows a zipper being unzipped. Top right shows Velcro straps securing the canopy top to the frame corners.

Step 3: Locking the Frame

From under the canopy, use one hand to push the central bottom hub straight up until it clicks into the central pole.

Diagram Description: Shows the central bottom hub being pushed upwards into the central pole with a large arrow, and the word "Click" indicating the locking action.

Step 4: Adjusting the Canopy Height

Press the push pin on each leg and raise or lower it to adjust the canopy height.

Diagram Description: A hand is shown pressing a push pin on a telescoping leg, with an arrow indicating downward movement to lower the leg.

Step 5: Velcro Connection

Secure the canopy top to the corners of the canopy frame with Velcro. Secure the canopy top to the legs of the canopy frame with Velcro.

Diagram Description: Shows Velcro connections securing the canopy top to the frame corners and to the canopy legs.

Step 6: Securing the Canopy in Place

Unzip the doors and insert a spiral stake into the footpad of each canopy leg. Insert the stake into the two round holes of the plastic base. Tie four ropes to the corners of the top fabric. Measure from each leg to a proper distance and secure four stakes to the ground. Tie the ropes to the stakes in the ground. Ensure the rope has the proper tension by adjusting the plastic adjusters on the ropes.

Included weight bags are designed for quick and easy use. Fill the bags with sand or gravel and simply use the hook and loop strap around each leg.

Diagram Description: Shows weight bags (X4), stakes being inserted into footpads (X8), ropes tied to fabric corners and stakes (X4), and stakes being driven into the ground (X4).

Step 7: Rolling Up the Door and the Curtain

Roll up the door and the curtains if necessary.

Diagram Description: Shows how to roll up the door and curtains using ties.

Completion

The assembly is now complete.

Manufacturer and Importer Details

E-mail: CustomerService@vevor.com

Manufacturer: ZHEJIANG HUIGUAN LEISURE PRODUCTS CO., LTD

Address: No.30. East Yunqiao Road, Liyang Town, Ninghai, Ningbo, Zhejiang, China

Importer: WAITCHX

Address: 250 bis boulevard Saint-Germain 75007 Paris

Importer: FREE MOOD LTD

Address: 2 Holywell Lane, London, England, EC2A 3ET

European Representatives:

EUREP GmbH

Address: Unterlettenweg 1a, 85051 Ingolstadt, Germany

EUREP UK LTD

Address: UNIT 2264, 100 OCK STREET, ABINGDON OXFORDSHIRE ENGLAND OX14 5DH