ASUS Mini PC PN Series Quick Start Guide

Package Contents

• ASUS PN50-E1 / ASUS PN51-E1 Desktop PC Quick Start Guide
• AC power adapter*
• Power cord*
• Technical documentations

Note: The bundled power adapter may vary by model and territories. Some bundled accessories may vary with different models. For details on these accessories, refer to their respective user manuals. The device illustration is for reference only. Actual product specifications may vary with models. If the device or its components fail or malfunction during normal and proper use within the warranty period, bring the warranty card to the ASUS Service Center for replacement of the defective components.

Features

Front View

IR Receiver (on selected models)

The remote sensor detects signal from your remote control, allowing you to access the control panel from a distance. Note: The remote control is purchased separately.

Drive Activity Indicator

This indicator lights up when your Mini PC is accessing the internal storage drive.

Power Button

The power button allows you to turn your Mini PC on or off. You can use the power button to put your Mini PC to sleep mode or press it for four (4) seconds to force shutdown your Mini PC.

Microphone (on selected models)

The built-in microphone can be used for video conferencing, voice narrations, or simple audio recording.

Headphone/Headset/Microphone Jack (on selected models)

This port allows you to connect amplified speakers or headphones. You can also use this port to connect your headset or an external microphone.

USB 3.2 Gen 2 Type-C®/DisplayPort Combo Port

This USB Type-C® (Universal Serial Bus) port provides a transfer rate of up to 10 Gbit/s, and supports DisplayPort 1.4. Use a USB Type-C® adapter to connect your Mini PC to an external display. This port also supports the Battery Charging 1.2 technology that allows you to charge your USB devices. Note: Battery Charging 1.2 technology is only available on selected models, and provides a maximum of 5V / 1.5A output. When using only this port as a display output source, this port will support a resolution of up to 7680 x 4320 @30Hz, or 5120 x 2280 @120Hz. The resolution may also be affected by the cabling and output device.

Memory Card Slot (on selected models)

The built-in memory card reader enables your Mini PC to read and write data to and from Micro SD cards.

USB 3.2 Gen 1 Port

The USB 3.2 Gen 1 (Universal Serial Bus) port provides a transfer rate up to 5 Gbit/s.

Left View

Air Vents (intake vent)

The air vents allow cooler air to enter your Mini PC chassis. Important: For an optimum heat dissipation and air ventilation, ensure that the air vents are free from obstructions.

Right View

Air Vents (intake vent)

The air vents allow cooler air to enter your Mini PC chassis. Important: For an optimum heat dissipation and air ventilation, ensure that the air vents are free from obstructions.

Kensington® Security Slot

The Kensington® security slot allows you to secure your Mini PC using Kensington® security products.

Rear View

HDMI™ Port

The HDMI™ (High Definition Multimedia Interface) port supports a Full-HD device such as an LCD TV or monitor to allow viewing on a larger external display. Note: When using only this port as a display output source, this port will support a resolution of up to 3840 x 2160 @60Hz. The resolution may also be affected by the cabling and output device.

Air Vents (exhaust vent)

The air vents allow your Mini PC chassis to expel hot air out. Important: For an optimum heat dissipation and air ventilation, ensure that the air vents are free from obstructions.

Configurable Port

This port varies between models and consists of the following port options:

VGA Port

This port allows you to connect your Mini PC to an external display. Note: When using only this port as a display output source, this port will support a resolution of up to 1920 x 1200 @60Hz. The resolution may also be affected by the cabling and output device.

Serial (COM) Connector

The 9-pin serial (COM) connector allows you to connect devices that have serial ports such as mouse, modem, or printers.

LAN Port

The 8-pin RJ-45 LAN port supports a standard Ethernet cable for connection to a local network.

DisplayPort

This port allows you to connect your Mini PC to an external display. Note: When using only this port as a display output source, this port will support a resolution of up to 4096 x 2160 @60Hz. The resolution may also be affected by the cabling and output device.

FCC Compliance Information

Per FCC Part 2 Section 2.1077

Responsible Party: Asus Computer International

Address: 48720 Kato Rd, Fremont, CA 94538

Phone/Fax No: (510)739-3777/(510)608-4555

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Ver. 180620

Getting Started

Connect the Power Adapter and Cord

Connect the supplied power adapter and cord to the Mini PC's power input jack. The adapter converts AC power to DC power for the Mini PC. Warning: The power adapter may become warm to hot when in use. Do not cover the adapter and keep it away from your body.

Power adapter ratings: 65W (+19.0V DC 3.42A or +19.5V DC 3.33A) or 90W (+19.0V DC 4.74A or +19.5V DC 4.62A).

Connect a Display Panel

Connect a display panel to your Mini PC using a display cable to one of the following ports: VGA, HDMI™, DisplayPort, or USB 3.2 Gen 2 Type-C®/DisplayPort combo ports.

Up to four display panels may be connected simultaneously.

Maximum resolutions when using a single port:

• Front USB 3.2 Gen 2 Type-C®/DisplayPort combo port: Up to 7680 x 4320 @30Hz, or 5120 x 2280 @120Hz.
• Rear USB 3.2 Gen 2 Type-C®/DisplayPort combo port: Up to 7680 x 4320 @30Hz, or 5120 x 2280 @120Hz.
• HDMI™ port: Up to 3840 x 2160 @60Hz.
• Configurable VGA port: Up to 1920 x 1200 @60Hz.
• Configurable DisplayPort port: Up to 4096 x 2160 @60Hz.

Note: The maximum resolution may be affected by the cabling and output device.

Connect Wired or Wireless Keyboard and Mouse

Connect your keyboard and mouse to available USB ports.

Upgrading Your Mini PC

General Precautions

Important: It is recommended that you install or upgrade memory modules, wireless cards, and solid-state drives (SSD) under professional supervision. Visit an ASUS service center for further assistance. Ensure your hands are dry before proceeding. Use a grounded wrist strap or touch a grounded object to avoid static electricity damage.

Installing 2.5" HDD or SSD

1. Prepare your 2.5" HDD or SSD. Align it with the storage bay on the bottom cover of your Mini PC.

2. Insert the HDD or SSD into the storage bay and secure it with four (4) screws.

Important: This device only supports 7mm and 9.5mm 2.5" HDD or SSD.

Installing the M.2 SSD (on selected models)

1. Align and insert the 2280 M.2 SSD into its slot inside the Mini PC.

2. Gently push down the M.2 SSD onto the screw hole and fasten it using a bundled 3mm round screw.

Installing the Wireless Card

Your Mini PC includes an M.2 slot for 2230 wireless and Bluetooth modules. Refer to http://www.asus.com for a list of compatible modules.

1. Align and insert the wireless card into its slot.

2. Gently push down the wireless card onto the screw hole and fasten it using the stand screw.

3. (Optional) Connect the antennas to your wireless card for stronger signal. A soft clicking sound indicates secure attachment.

Installing Memory Modules

Your Mini PC has two SO-DIMM memory slots for DDR4 SO-DIMMs.

Important: Refer to http://www.asus.com for compatible DIMMs. Only DDR4 SO-DIMMs can be installed.

Align and insert the memory module into the slot and press it down until securely seated. Repeat for the second module.

Removing and Replacing the Bottom Cover

Removing the Bottom Cover

1. Turn off your Mini PC and disconnect all cables and peripherals.

2. Place the Mini PC on a flat, stable surface with the top side facing down.

3. Remove the four (4) screws from the bottom cover, then push the bottom cover towards the right to remove it.

Replacing the Bottom Cover

1. (Optional) Remove the M.2 SSD if installed by removing its screw.

2. Remove the M.2 stand screw.

3. Push the bottom cover from the left side towards the right side of the Mini PC, then secure it using the previously removed screws.