Tribesigns HOGA-HQ0019 Console Table Assembly Instructions

Model: HOGA-HQ0019

Brand: Tribesigns

Product Overview

This document provides assembly instructions and important safety information for the Tribesigns HOGA-HQ0019 Console Table. Please read and keep for future reference.

Customer Support: For any missing, damaged, or incorrect parts, please contact customer service at support@tribesigns.com for free replacement instead of returning the product.

Assembly Requirements: Two people are recommended for assembly. Estimated assembly time is 30 minutes.

Before You Start

Assembly Preparation

Remove all packaging materials, staples, and packing straps from the carton.
Refer to the Parts List and Hardware List to ensure all components are complete before starting assembly.
Place all parts on a clean, flat, and soft surface (e.g., carpet or rug) to prevent scratching.

Safety Precautions

Keep all hardware parts out of reach of children.
Dispose of plastic packaging material immediately to avoid the risk of suffocation to children and animals.

Tips for Assembly

Allow ample room for assembly and place the product close to its final location.
Assemble the product on a surface that will not scratch or damage the exterior gloss and finish of the furniture.
Check all parts and quantities before assembly. Contact customer service for missing parts.
Identify all parts, hardware, and quantities required for each step.
Do not over-tighten fittings during assembly, as this may cause damage.
Do not use power tools to assemble this product.
Always place the product on a flat surface.
Do not sit or stand on the partially assembled product; use it only for its intended purpose.
Do not tighten screws completely at first; this allows for disassembly if parts are assembled incorrectly. Tighten all screws at the end when all parts are in place.
Use screws correctly to avoid damaging the desk panel.

Parts List

The following parts are included in the package:

Part Number	Description	Quantity
1	Top Panel	1 PC
2	Shelf Panel	2 PCS
3	Side Panel (Left/Right)	2 PCS
4	Drawer Front Panel	2 PCS
5	Drawer Side Panel (Left/Right)	2 PCS
6	Drawer Back Panel	2 PCS
7	Drawer Bottom Panel	2 PCS
8	Side Frame (Left)	1 PC
9	Side Frame (Right)	1 PC
10	Support Bar	1 PC
11	Crossbar	4 PCS

Hardware List

The following hardware is included:

Identifier	Description	Quantity
A	M5*45 Screw	8 PCS
B	Ø15*12 Cam Lock	8 PCS
C	M6*12 Screw	8 PCS
D	M6*30 Screw	12 PCS
E	M6*40 Screw	4 PCS
F	M4*18 Screw	2 PCS
G	M5*40 Screw	8 PCS
H	Drawer Handle	2 PCS
I	Allen Wrench	1 PC

Assembly Steps

Step 1: Assemble the Base Frame

Attach the crossbars (11) to the support bar (10) using four M6*40 screws (E). Repeat this process four times to create the base structure.

Diagram Description: Shows four crossbars (11) connecting to a central support bar (10) using screws (E).

Step 2: Attach Side Frames

Connect the left side frame (8) and the right side frame (9) to the assembled base structure. Use eight M6*12 screws (C) to secure the frames.

Diagram Description: Shows the side frames (8, 9) being attached to the crossbars (11) of the base structure using screws (C).

Step 3: Install Shelf Panels

Place the two shelf panels (2) into the frame. Secure them using eight M6*30 screws (D).

Diagram Description: Shows the shelf panels (2) being fitted into the frame and secured with screws (D).

Step 4: Attach Top Panel

Position the top panel (1) onto the assembled frame. Secure it using four M6*30 screws (D).

Diagram Description: Shows the top panel (1) being placed on the frame and attached with screws (D).

Step 5: Assemble Drawers

Assemble two drawers. For each drawer, connect the drawer front panel (4), drawer side panels (5), and drawer back panel (6). Slide the drawer bottom panel (7) into the grooves. Secure the drawer sides to the front panel using M5*40 screws (G). Repeat for the second drawer.

Diagram Description: Shows the components of a drawer (4, 5, 6, 7) being assembled using screws (G). The process is marked 'x2' for two drawers.

Step 6: Attach Drawer Slides and Handles

Attach the drawer slides or supports to the drawer sides and the console frame using the provided hardware. Attach the drawer handles (H) to the drawer front panels (4). Use M5*45 screws (A), Ø15*12 cam locks (B), M4*18 screws (F), and drawer handles (H).

Diagram Description: Shows the attachment of drawer components, including handles (H) and internal supports, using screws (A, B, F). The process is marked 'x2' for two drawers.

Step 7: Insert Drawers

Slide the assembled drawers into the console unit.

Diagram Description: Shows arrows indicating the insertion of the assembled drawers into the console.

Customer Care

Tribesigns is committed to customer satisfaction. If you are happy with your purchase, that's great. If any part arrives damaged or is missing, please contact customer service at support@tribesigns.com for a free replacement. We aim to ensure your furniture arrives without any issues, but acknowledge that occasional mistakes can happen.

Our Way vs. Their Way for Returns/Replacements:

Our Way: Give us an email (support@tribesigns.com), we arrange a free replacement with zero hassle.
Their Way: Re-package item, schedule pick-up, track package, replacement.

We understand that dealing with returns can be time-consuming, which is why we prioritize hassle-free replacements.

	Tribesigns LITTLE TREE Console Table Assembly Instructions - Model HOGA-RY0013X/HOGA-RY0052X Detailed assembly instructions for the Tribesigns LITTLE TREE Console Table (Model HOGA-RY0013X/HOGA-RY0052X). Includes parts list, hardware guide, step-by-step diagrams, and customer support information.
	Tribesigns HOGA-J0356 Porch Table Assembly Instructions \| Furniture Assembly Guide Detailed step-by-step assembly instructions for the Tribesigns HOGA-J0356 Porch Table. Includes parts list, hardware guide, and safety tips for easy furniture assembly.
	Tribesigns LITTLE TREE Console Table Assembly Instructions - Model HOGA-F2000 Detailed assembly instructions for the Tribesigns LITTLE TREE Console Table, Model HOGA-F2000. Includes parts list, hardware list, and step-by-step guidance for assembly.
	Tribesigns HOGA-LD0005 Console Table Assembly Instructions Comprehensive assembly instructions for the Tribesigns HOGA-LD0005 Console Table, featuring a step-by-step guide, parts list, hardware list, and contact information for customer support.
	Tribesigns Console Table Assembly Instructions Assembly instructions for the Tribesigns Console Table, Model No. HOGA-C0690X/C0814, HOGA-HL048/HOGA-HL079. Includes parts list, hardware list, and step-by-step assembly guidance.
	Tribesigns Coffee Table Assembly Instructions - Model HOGA-XK00515 Detailed assembly instructions for the Tribesigns coffee table, model HOGA-XK00515, HOGA-XK00730, HOGA-XK00766. Includes parts list, hardware list, and step-by-step guidance for assembly.
	Tribesigns HOGA-SL0032 Console Table Assembly Instructions Comprehensive assembly guide for the Tribesigns HOGA-SL0032 Console Table, featuring a parts list, hardware list, and step-by-step instructions with detailed textual descriptions of diagrams.
	Tribesigns Dining Table Assembly Instructions - HOGA Series Comprehensive assembly instructions for the Tribesigns Dining Table, model series HOGA-JW0669, HOGA-JW0752, HOGA-JW0879, and HOGA-JW1043. Includes detailed parts list, hardware list, step-by-step assembly guidance, and contact information for customer support.