Geberit Toilet Seat Installation Manual

Insert the threaded bolts through the designated holes on the toilet bowl. Ensure they are positioned correctly.

Place the fixing bracket over the threaded bolts and secure it with the provided nuts. Tighten them firmly.

Align the toilet seat hinges with the fixing brackets and push down until they click into place. Ensure a secure fit.

Adjust the position of the toilet seat as needed. Some models allow for horizontal adjustment.

Verify that the toilet seat is properly aligned with the toilet bowl and is stable. Check for any wobbling.

For certain models, a final tightening of the mounting bolts may be required using an 8mm wrench. Ensure not to overtighten.

If your model features a quick-release mechanism, follow the specific instructions for detaching and reattaching the seat for cleaning.

Test the soft-close feature by lifting and releasing the seat and lid. They should close slowly and quietly.