Geberit AquaClean Alba Installation Manual

Product Overview and Dimensions

The Geberit AquaClean Alba is a bidet toilet seat. The following diagram shows the dimensions:

Top View:

• Width: 375 mm
• Depth: 565 mm
• Seat Width: 30 mm
• Seat Depth: 20 mm

Side View:

• Height: 48 mm
• Base Height: 32 mm
• Projection from wall: 375 mm

Front View (Water Connections):

• Diameter of water inlet: 185 mm
• Distance from wall: 35 mm
• Pipe connection diameter: 18 mm
• Depth of connection: 23 mm
• Overall depth: 6 mm

Installation Steps

Follow these steps carefully for a successful installation:

1. Unpacking and Preparation:
   • Carefully unpack all components.
   • Ensure all parts are present as per the packing list.
   • The diagram shows the product being removed from its packaging.
2. Mounting Bracket Installation:
   • The diagram shows a mounting bracket being attached to the wall.
   • Ensure the bracket is level and securely fastened.
3. Connecting Water Supply:
   • The diagram illustrates connecting the water supply hose.
   • Ensure the connection is tight to prevent leaks.
4. Electrical Connection:
   • The diagram shows the electrical connection process.
   • Ensure the power supply is switched off before connecting.
   • The diagram shows a person plugging in the device.
   • Note: Electrical connections should be made by a qualified electrician.
5. Attaching the Bidet Seat:
   • The diagram shows the bidet seat being attached to the mounting bracket.
   • Follow the indicated steps for secure attachment.
6. Connecting Hoses and Pipes:
   • Diagrams show the connection of the water inlet hose and drain pipe.
   • Ensure all connections are secure and leak-free.
   • A diagram shows a hose being connected with a threaded fitting.
7. Final Assembly and Testing:
   • The diagrams show the final assembly steps, including attaching the seat and lid.
   • Test the water flow and functions after installation.
   • A diagram shows a water spray test.

Electrical Connection Details

The electrical connection requires specific wiring. The diagram shows:

• A cable with a diameter of 6-12 mm.
• Wire connections labeled N (Neutral), L (Live), and Ground (earth symbol ⏚).
• The length of the stripped wire is indicated as 21 mm.
• The ground wire length is 31 mm.
• The cross-sectional area of the wire is A = 1-2.5 mm².
• Diagrams show the process of inserting wires into a connector and securing it.
• A diagram shows a connector being assembled with a cable gland.

Important Notes

• Refer to the diagrams for precise measurements and assembly sequences.
• Ensure all water connections are properly tightened.
• The installation requires basic tools such as wrenches and screwdrivers.
• A diagram shows a wrench and a screwdriver.
• A diagram indicates a required hole diameter of 16 mm.
• A diagram shows a measurement of 30 mm.
• A diagram shows a measurement of 40 mm.
• A diagram shows a measurement of 19 mm.
• A diagram shows a weight limit of > 120 kg.
• A diagram indicates a time of 20 seconds.
• A diagram indicates a time of 3 seconds.
• A diagram shows a torque setting of T 20.

Troubleshooting and Maintenance

Refer to the relevant sections of the manual for troubleshooting common issues and for maintenance guidelines.

Contact Information

For further assistance, please contact Geberit International AG:

Schachenstrasse 77, CH-8645 Jona

Email: documentation@geberit.com

Website: www.geberit.com