Geberit AquaClean Tuma Comfort / Classic

Step 1: Unpacking and Preparation

Carefully unpack the unit. The packaging includes protective elements for the ceramic and the unit itself. Follow the visual guide for correct unpacking and handling.

Step 2: Electrical Connection Preparation

The unit requires an electrical connection. The diagram shows a standard plug with three pins labeled L (Live), N (Neutral), and a ground symbol. The cable entry requires a diameter of 6-12 mm. The wires should be stripped to 21 mm, with the L wire at 31 mm and the N wire at 31 mm. The cross-sectional area (A) should be 1-2.5 mm².

The connection process involves:

1. Inserting the cable into the connector.
2. Securing the cable with a clamping ring.
3. Connecting the wires to the terminals (L, N, Ground).
4. Tightening the connector cap.

A 24 mm wrench is recommended for tightening.

Step 3: Mounting the Concealed Cistern Components

This section details the mounting of various components within the concealed cistern, including water inlet and outlet connections. Specific steps are shown for different Geberit systems:

• Sigma: Follows a specific sequence of connections and checks.
• Omega 112cm: Details the connection process for this cistern height.
• Omega/Kappa 82cm/98cm: Provides instructions for these specific cistern models.
• Omega PEX: Outlines the installation for PEX connections, referencing part number 240.921.00.1.
• Geberit Monolith: Instructions for integrating with the Geberit Monolith system.

Each sub-section includes visual guides for connecting hoses and securing components, often with checks (✔️) and warnings (❌).

Step 4: Water Connection and Flushing

The installation involves connecting the water supply to the bidet seat. This includes:

• Connecting the flexible hose to the water inlet valve.
• Ensuring a secure connection, with a visual check for leaks.
• A step demonstrating a 10-second flush to test the system.

Step 5: Attaching the Bidet Seat

The bidet seat is attached to the ceramic toilet bowl. This involves aligning the seat with the mounting points and securing it. Visual indicators show correct alignment and attachment.

Specific steps include:

• Mounting the seat onto the bowl, with arrows indicating the direction of attachment.
• Securing the seat with screws.
• A check for proper seating and stability.

Step 6: Final Checks and Settings

Final checks ensure the unit is correctly installed and functional. This includes:

• Checking for water leaks.
• Verifying electrical connections.
• Testing the remote control functions.

The manual also covers initial setup and language selection via the remote control. Users can select from languages such as German, English, French, Italian, Dutch, Danish, Greek, and Turkish.

Remote Control Functions:

• Language Selection: Navigate through language options using the arrow keys and 'OK' button.
• User Profiles: The remote allows for multiple user profiles, indicated by 'Sprache 1/9', 'Sprache 2/9', etc.
• Feature Activation: Buttons for various functions like water temperature, spray intensity, and seat heating are shown.

Step 7: Operating the AquaClean Tuma

The AquaClean Tuma offers various functions controlled via the remote or side buttons:

• Water Spray: Adjust spray intensity, position, and temperature.
• Seat Heating: Control the seat temperature.
• Dryer Function: Activate the air dryer.
• User Presets: Save preferred settings for different users.
• Night Light: Activate the integrated night light.
• Cleaning Functions: Information on self-cleaning and manual cleaning procedures.

Visual indicators on the remote and the unit show the status of different functions, including water temperature (indicated by color changes or temperature icons) and spray patterns.

Troubleshooting:

• A 'Connection established' message indicates successful pairing between the remote and the unit.
• Error indicators or specific light patterns may signify issues that require troubleshooting as per the manual.

Step 8: Final Seat Attachment and Cover Installation

The final steps involve attaching the toilet seat and cover securely. This includes:

• Aligning the seat hinges with the mounting posts.
• Clicking the seat into place.
• A visual confirmation of secure attachment.

The manual also provides contact information for Geberit International AG for further support.