Heyday Compact Wireless Keyboard Instructions Manual

Getting Started

Need some help? Can't get it to pair? Just have a question? Call us at: 1-833-TGT-Tech.

Safety Precautions:

• Do not use near any water source.
• Do not modify or repair this device.
• Do not use in high temperatures or extreme weather.
• Do not use chemical detergents to clean your device; use a soft dry cloth.

Product Information

Brand: heyday

Model: KSR-BW, KSR-DC, KSR-JA

FCC ID: PRDKB63

Input: 3V 50mA

Made in: CHINA

This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: 1) this device may not cause harmful interference, and 2) this device must accept interference received, including interference that may cause undesired operation.

FCC Caution: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Radiation Exposure Statement: The product complies with the FCC portable RF exposure limit set forth for an uncontrolled environment and is safe for intended operation as described in this manual. Further RF exposure reduction can be achieved if the product can be kept as far as possible from the user's body or the device is set to lower output power if such function is available.

Battery Note: Do not mix old and new batteries, and do not mix alkaline, standard (zinc-carbon), or rechargeable (NiCad, NiMH, etc.) batteries. Battery life may vary depending on user and computing conditions.

The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by TargetCorp. is under license. Other trademarks and trade names are those of their respective owners.

Product Overview

heyday compact wireless keyboard

Components:

• Wireless USB receiver
• 2 x AAA batteries (included)

Features:

• Connect via wireless USB receiver or Bluetooth.
• Can be paired with up to 3 different devices using connection channels: Wireless USB receiver, Bluetooth Channel 1 ($1), and Bluetooth Channel 2 ($2).
• Automatic operating system detection (Windows/Mac) with manual override (Fn + P for Windows, Fn + I for Mac).

Detailed Setup

Connecting via Wireless USB Receiver:

• Ensure the keyboard power is on.
• Plug the USB receiver into an available USB A port on your device.
• Set the connection channel to the wireless USB receiver.
• This connection is plug-and-play.

Connecting via Bluetooth:

In Windows:

1. Turn on the keyboard and set it to Bluetooth Channel 1 ($1) or Channel 2 ($2).
2. Go to Start Menu -> Settings -> Devices -> Bluetooth & other devices.
3. Turn on Bluetooth and select 'Add Bluetooth or other device' -> 'Add a device (Bluetooth)'.
4. Press and HOLD 'Fn' and SHORT press '$1' or '$2' to put the keyboard into pairing mode (LED will flash green for $1, red for $2).
5. Click 'heyday compact kb' to connect. The LED will stop flashing and remain lit, then turn off upon completion.

In Mac:

1. Turn on the keyboard and set it to Bluetooth Channel 1 ($1) or Channel 2 ($2).
2. Go to Apple menu -> System Preferences -> Bluetooth. Turn Bluetooth on.
3. Press and HOLD 'Fn' and SHORT press '$1' or '$2' to put the keyboard into pairing mode (LED will flash green for $1, red for $2).
4. Click 'heyday compact kb' to connect. The LED will stop flashing and remain lit, then turn off upon completion.

Switching Connection Channels:

• Press and HOLD 'Fn' and SHORT press '$1' or '$2' to switch between channels. The default channel is the wireless USB receiver.
• Example: To switch from wireless USB receiver to Bluetooth Channel 1, press and HOLD 'Fn' and SHORT press '$1'. The LED indicator for Channel 1 will flash green.

Troubleshooting

If the keyboard is not working (USB Receiver):

1. Turn off the keyboard, re-plug the USB receiver, and turn the keyboard power on (ensure the correct channel is selected).
2. Press and HOLD 'Fn' and LONG press the wireless USB receiver key (keep the keyboard close to the receiver).
3. If it does not work after 10 seconds, reboot your device and repeat steps 1-3.

If the keyboard is not working (Bluetooth):

1. Turn off the keyboard, turn the power on again (ensure the correct Bluetooth channel $1 or $2 is selected).
2. Make sure Bluetooth is turned on on your device.
3. Press and HOLD 'Fn' and LONG press '$1' or '$2' to set the keyboard in pairing mode. Ensure it is discoverable on your device and then pair.
4. If it does not work after 10 seconds, reboot your device and repeat steps 1-3.
5. If it's not working on previously paired devices, ensure Bluetooth is on for that device and the keyboard is set to the correct Bluetooth channel.

Low Battery Indicator

If the red LED starts to flash, it indicates that the batteries need to be replaced.

Function Keys

Press and hold 'Fn' + F1 ~ F12 for shortcut functions:

Press F1~F12 as standard function keys without holding 'Fn'.