Pure & Easy
ASSEMBLY INSTRUCTIONS
Model Numbers: FTBFVT - 7001 FTBFVT - 7010
Document Version: PYJS-V01
NOTICE
IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY
Assemble on a flat, clean and soft surface. ?
Diagram shows assembly on a suitable surface vs. an unsuitable surface (marked with X).
Professional installation is highly recommended. ⚙️
Periodically check that all components are tightly secured. ⚙️
Recommendations
It is recommended that multiple people assemble this product.
Diagram shows two people assembling vs. one person assembling (marked with X).
Auxiliary Tools Required:
- Screwdriver (Phillips head) ?
- Hammer ?
- Wrench/Spanner ?
- Measuring Tape ?
- Drill [drill]
- Safety Glasses ?
- Gloves ?
PARTS
| Item No. | Reference Image | Qty. | Item No. | Reference Image | Qty. |
|---|---|---|---|---|---|
| 1 | [Panel with slots] | x1 | 8 | [Long rectangular panel] | x1 |
| 2 | [Long rectangular panel] | x1 | 9 | [Long rectangular panel] | x1 |
| 3 | [Panel with holes] | x1 | 10 | [Panel with holes] | x1 |
| 4 | [Side panel] | x1 | 11 | [Side panel] | x1 |
| 5 | [Side panel] | x1 | 12 | [Panel with holes] | x1 |
| 6 | [Panel with holes] | x1 | 13 | [Panel with holes] | x1 |
| 7 | [Panel with holes] | x1 | 14 | [Panel with holes] | x1 |
| 15 | [Panel with holes] | x1 | 22 | [Drawer side panel] | x5 |
| 16 | [Long panel] | x1 | 23 | [Drawer front panel] | x5 |
| 17 | [Support bar] | x2 | 24 | [Drawer bottom panel] | x5 |
| 18 | [Back panel] | x1 | 25 | [Drawer back panel] | x5 |
| 19 | [Drawer side panel] | x2 | 26 | [Support bar] | x2 |
| 20 | [Drawer bottom panel] | x1 | 27 | [Drawer runner] | x1 |
| 21 | [Drawer front panel] | x5 | 28 | [Drawer base frame] | x2 |
| 29 | [Top panel/Shelf] | x1 | G | [Screw Ø1/4x28] | x14 |
| A | [Cam Bolt] | x38 | H | [Screw Ø1/4x55] | x8 |
| B | [Cam Lock] | x38 | I | [Screw 5/32x16] | x5 |
| C | [Dowel Ø6x30mm] | x17 | J | [Cam Lock] | x5 |
| D | [Screw Ø4x30mm] | x51 | K | [Washer] | x8 |
| E | [Screw Ø3.5x12mm] | x68 | L | [Cam Lock] | x8 |
| F | [Small bracket/plate] | x2 | M | [Screw] | x2 |
| N | [Connector/Adapter] | x4 | Q | [Drawer handle assembly] | x1 |
| O | [Drawer runner] | x5 | R | [Allen key] | x1 |
| P | [Drawer slide mechanism] | x5 SET | S | [LED Light component] | x2 |
EXPLODED VIEW
Diagram shows all parts disassembled and labeled with numbers, indicating how they fit together to form the final product.
Safety Warning: Furniture Tip-Over
Serious or fatal crushing injuries can occur from furniture tip-over. Always secure this furniture to the wall using tip-over restraints.
Diagram shows furniture tipping over with a person underneath (marked with X) vs. furniture secured to the wall.
Child Safety Warning
Never let children climb or hang on drawers, doors, or shelves.
Diagram shows children climbing on furniture (marked with X).
Drawer Runner Installation
Press and hold the drawer runner lock and then continue to slide drawer runners apart before installation.
Diagram shows how to separate the inner and outer parts of a drawer runner.
CAM BOLT INSTALLATION
Cam bolt and Connecting piece are used together.
A1: Insert pin into panel.
A2: Ensure no gap.
A3: Rotate connecting piece if found in the position illustrated above.
A4: Correct orientation to receive bolts.
Diagrams illustrate the correct insertion and orientation of cam bolts and connecting pieces.
Door Hinge Installation and Adjustment:
- Use the "waist round hole" marked with a triangle to adjust the position of the door panel (ensure that the gap between the door panel and the upper and lower panels is consistent).
- Use the screw at the back end of the hinge to adjust the front and back position of the door panel (ensure that the front of the door panel is in the same plane as the upper and lower panels).
- Use the screw at the front end of the hinge to adjust the left and right position of the door panel (ensure that the left and right sides of the door panel are in the same plane as the upper and lower panels).
- After completing these three steps, secure the other two screws on the hinge.
Diagrams show hinge adjustment steps 1 through 4.
Assembly Steps
Step 1
Attach drawer runners (part 11) to side panels using screws (A x2 PCS) and dowels (E x15 PCS).
Diagram shows attaching runners to panels with screws and dowels.
Step 2
Attach drawer runners (part 12) to side panels using screws (A x4 PCS) and dowels (E x15 PCS). Rotate to align.
Diagram shows attaching runners to panels with screws and dowels, with a rotation indicator.
Step 3
Connect panel 11 to panel 12 using cam bolts (B x4 PCS) and cam locks (B). Ensure correct alignment with arrows.
Diagram shows connecting two panels using cam bolts and locks.
Step 4
Attach panel 13 to the assembly using screws (A x4 PCS).
Diagram shows attaching a panel with screws.
Step 5
Attach panel 13 to the assembly using cam bolts (B x4 PCS) and cam locks (B).
Diagram shows attaching a panel with cam bolts and locks.
Step 6
Attach panel 10 to the assembly using dowels (C x3 PCS) and screws (D x6 PCS).
Diagram shows attaching a panel with dowels and screws.
Step 7
Attach drawer runners (part 17) to side panels using cam bolts (B x2 PCS) and cam locks (G x2 PCS). Attach panel 16 using cam bolts (B x2 PCS).
Diagram shows attaching runners and a panel using cam bolts and locks.
Step 8
Attach panel 18 to the assembly using screws (H x2 PCS) and M (x2 PCS).
Diagram shows attaching a panel with screws.
Step 9
Insert drawer unit (part 19) into the main frame.
Diagram shows sliding a drawer unit into the desk structure.
Step 10
Attach back panel (part 1) to the desk base using dowels (C x3 PCS).
Diagram shows attaching a back panel with dowels.
Step 11
Attach back panel (part 3) to the desk base using dowels (C x4 PCS).
Diagram shows attaching a back panel with dowels.
Step 12
Attach supports using screws (E x10 PCS) and dowels (O x5 PCS).
Diagram shows attaching supports with screws and dowels.
Step 13
Attach front panel (part 5) to the drawer assembly using screws (D x4 PCS).
Diagram shows attaching a front panel with screws.
Step 14
Attach panel 6 to panel 7 using dowels (C x2 PCS).
Diagram shows attaching two panels with dowels.
Step 15
Attach panel 4 to the drawer assembly using screws (D x7 PCS).
Diagram shows attaching a panel with screws.
Step 16
Attach panel 4 to the drawer assembly using screws (D x5 PCS).
Diagram shows attaching a panel with screws.
Step 17
Assemble drawer sides (part 9) using screws (A x8 PCS) and dowels (C x3 PCS).
Diagram shows assembling drawer sides with screws and dowels.
Step 18
Attach drawer base (part 8) to the assembled drawer sides using dowels (C x2 PCS).
Diagram shows attaching a drawer base to sides with dowels.
Step 19
Attach drawer front panel (part 19) to the drawer assembly using screws (D x9 PCS).
Diagram shows attaching a drawer front panel with screws.
Step 20
Assemble the desk structure by attaching the drawer units and supports using cam bolts (B x8 PCS) and cam locks (G x6 PCS).
Diagram shows assembling the main desk structure with drawer units and supports.
Step 21
Attach the mirror support structure (part 13) to the desk using connectors (N x4 PCS). Insert into slots (20) and secure with part 13.
Diagram shows attaching a mirror support using connectors.
Step 22
Attach the LED light components (S x2 PCS) to the mirror frame using screws (E x8 PCS) and cam locks (K x8 PCS).
Diagram shows attaching LED lights to a frame with screws and cam locks.
Step 23
Assemble drawer fronts (part 21) using screws (A x20 PCS) for each of the 5 drawers.
Diagram shows attaching a front panel to a drawer box, repeated 5 times.
Step 24
Assemble drawer sides (part 22) to drawer bottoms (part 23) using cam bolts (B x20 PCS) and cam locks (B) for each of the 5 drawers.
Diagram shows assembling drawer sides to bottoms with cam bolts and locks, repeated 5 times.
Step 25
Insert drawer bottom (part 25) into the assembled drawer sides (part 23) for each of the 5 drawers.
Diagram shows sliding a drawer bottom into the drawer sides, repeated 5 times.
Step 26
Attach drawer back panel (part 24) to the drawer assembly using screws (D x20 PCS) for each of the 5 drawers.
Diagram shows attaching a drawer back panel with screws, repeated 5 times.
Step 27
Assemble drawer handles (part Q) to drawer fronts (part 21) using screws (I x5 PCS) and cam locks (J x5 PCS) for each of the 5 drawers.
Diagram shows attaching a drawer handle with screws and cam locks, repeated 5 times.
Step 28
Attach drawer runners (part E) to the drawer sides using screws (E x20 PCS) and runner sets (P2 x5 SET) for each of the 5 drawers.
Diagram shows attaching drawer runners to the drawer box.
Step 29
Insert the assembled drawer units into the desk frame.
Diagram shows sliding the drawer units into the desk.
Step 30
Attach the mirror assembly to the top of the desk using cam locks (L x8 PCS).
Diagram shows attaching the mirror unit with cam locks.
Step 31
Attach the top shelf/panel (part F) to the mirror structure using screws (F x2 PCS) and cam locks (I).
Diagram shows attaching a shelf with screws and cam locks.
Step 32
Assemble the leg structure using screws (H x6 PCS) and connecting to parts 26, 27, 28.
Diagram shows assembling the leg structure with screws.
Step 33
Attach the base panel (part 29) to the leg structure using cam bolts (G x6 PCS) and cam locks (G).
Diagram shows attaching a base panel to the legs with cam bolts and locks.
Step 34
Attach the mirror assembly to the main desk structure using part Q.
Diagram shows attaching the mirror assembly.
Step 35
Attach the LED light components (S x2 PCS) to the mirror assembly.
Diagram shows attaching LED lights.
Step 36
Final check of the assembled desk and stool.
Diagram shows the completed desk and stool.
Smart LED Mirror
This vanity mirror has a smart LED Light (Cold, Natural, Warm) that can be adjusted in 3 colors. A short press changes the color, and a long press adjusts the brightness.
HELP CENTER
If you encounter any difficulties during assembly, please contact us.
Email: after-sale.cs@hotmail.com
❓ Inquiry | ⚙️ Assembly issue | ? Missing parts | ? Returns & Refunds
DISCLAIMER
Manufacturer and seller expressly disclaim any and all liability for personal injury, property damage or loss, whether direct, indirect, or incidental, resulting from the incorrect attachment, improper use, inadequate maintenance, unapproved modification, or neglect of this product.
The manufacturer and seller disclaim all responsibility for personal injuries, material damage or losses, whether direct, indirect or incidental, resulting from incorrect attachment, improper use, inadequate maintenance, unauthorized modification, or neglect of this product.
Le fabricant et le vendeur déclinent expressément toute responsabilité en cas de blessures corporelles, de dommages matériels ou de pertes, qu'ils soient directs, indirects ou accessoires, résultant de la fixation incorrecte, de l'utilisation inappropriée, de l'entretien insuffisant, de la modification non approuvée ou de la négligence de ce produit.
