Pure & Easy
ASSEMBLY INSTRUCTIONS
Models: FTBFVT - 7004, FTBFVT - 7005, FTBFVT - 7039, FTBFVT - 7040, FTBFVT - 7041
Model Code: PYJS-V01
NOTICE
IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY.
Diagram: An illustration showing furniture being assembled on a flat, clean, and soft surface, contrasted with an 'X' over an assembly on an uneven or cluttered surface. Text: Assemble on a flat, clean and soft surface.
Diagram: An illustration showing a person assembling furniture, with a checkmark indicating professional installation is recommended, contrasted with an 'X' over a person assembling alone or improperly. Text: Professional installation is highly recommended.
⚙️ Periodically check that all components are tightly secured.
Recommendations
??? It is recommended that multiple people assemble this product.
Please have the following auxiliary tools ready: A drill, hammer, screwdriver, wrench, measuring tape, safety glasses, and a level.
PARTS LIST
| Item No. | Description | Quantity |
|---|---|---|
| 1 | A flat rectangular panel with multiple pre-drilled holes. | x1 |
| 2 | A long, thin rectangular panel with a groove along one edge. | x2 |
| 3 | A rectangular panel with several pre-drilled holes and a groove. | x1 |
| 4 | A long, narrow rectangular panel with pre-drilled holes. | x1 |
| 5 | A long, flat rectangular panel. | x1 |
| 6 | A long, flat rectangular panel with pre-drilled holes. | x1 |
| 7 | A square panel with pre-drilled holes. | x1 |
| 8 | A large rectangular panel, possibly the back panel or a main surface. | x1 |
| 9 | A long, thin panel with a groove. | x1 |
| 10 | A flat rectangular panel with pre-drilled holes. | x1 |
| 11 | A long, thin panel with a groove. | x2 |
| 12 | A flat rectangular panel with pre-drilled holes. | x1 |
| 13 | A long, flat panel with pre-drilled holes. | x1 |
| 14 | A long, flat panel with pre-drilled holes and a groove. | x1 |
| 15 | A long, flat panel. | x1 |
| 16 | A long, flat panel with pre-drilled holes. | x1 |
| 17 | A long, flat panel with a groove and pre-drilled holes. | x1 |
| 18 | A long, flat panel with pre-drilled holes. | x1 |
| 19 | A long, flat panel with pre-drilled holes. | x3 |
| 20 | A long, flat panel with pre-drilled holes. | x3 |
| 21 | A long, flat panel with pre-drilled holes. | x3 |
| 22 | A flat rectangular panel. | x3 |
| 23 | A long, flat panel with a groove. | x1 |
| 24 | A long, flat panel with a groove. | x1 |
| 25 | A long, flat panel with a groove. | x1 |
| 26 | A frame component, possibly a side support. | x1 |
| 27 | A long, thin support bar. | x2 |
| 28 | A long, thin support bar. | x1 |
| 29 | A rectangular panel with pre-drilled holes. | x2 |
| 30 | Two long, thin bars. | x2 |
| 31 | Two long, thin bars. | x2 |
| 32 | A flat rectangular panel. | x1 |
| 33 | A frame component, possibly a corner support. | x1 |
| A | Small screw, pointed tip. | x36 |
| B | Cam lock or similar connector. | x36 |
| C | Cylindrical dowel or peg, Ø6x30mm. | x10 |
| D | Medium screw, Ø3.5x12mm. | x38 |
| E | Long screw, Ø4x30mm. | x54 |
| F | Medium screw, Ø3.5x12mm. | x12 |
| G | Medium screw, Ø3.5x12mm. | x7 |
| H | Small cylindrical cap or cover. | x3 |
| I | Small screw, 5/32x16mm. | x3 |
| J | Hinge assembly. | x2 |
| K | Square bracket or connector. | x12 |
| L | Long screw, Ø1/4x55. | x12 |
| M | Medium screw, Ø1/4x50. | x6 |
| N | Medium screw, Ø1/4x30. | x12 |
| O | Small metal pin or hook. | x1 |
| P | Electrical connector or adapter. | x1 |
| Q | Small bracket or mounting plate. | x1 |
| R | Metal bracket or support. | x2 |
| S | Drawer runner components (S1, S2). | x3 |
| T | Medium screw, Ø1/4x35. | x8 |
| U | Electrical component or connector. | x3 |
| V | Electrical wire or connector. | x1 |
| W | LED light component or connector. | x2 |
EXPLODED VIEW
Diagram: A detailed exploded view of the vanity desk, showing all numbered parts and their relative positions for assembly. The main structure includes a desk with drawers and an attached hutch with shelves.
SAFETY WARNINGS
⚠️ WARNING: Serious or fatal crushing injuries can occur from furniture tip-over. Always secure this furniture to the wall using tip-over restraints.
Diagram: Illustration depicting furniture tipping over and causing injury, marked with an 'X', contrasted with furniture secured to a wall with restraints, marked with a checkmark. Text: Always secure this furniture to the wall using tip-over restraints.
? Never let children climb or hang on drawers, doors, or shelves.
Diagram: Illustration showing children climbing on furniture, marked with a prohibition symbol.
ASSEMBLY INSTRUCTIONS
Step 1
Diagram: Shows two long panels being joined by screws (A, 8 pcs) and dowels (C, 1 pc). Arrows indicate insertion and rotation. Text: Attach parts A and C to the indicated positions on the panels using screws and dowels. Ensure correct orientation and rotate as shown.
Step 2
Diagram: Shows attaching a panel to the structure using connectors (B, 2 pcs). Text: Attach the panel using connectors (B).
Step 3
Diagram: Shows two vertical panels being inserted into slots on a base panel. Arrows indicate insertion. Text: Insert the two vertical panels into the slots on the base panel.
Step 4
Diagram: Shows attaching panels using screws (E, 10 pcs). Arrows indicate insertion and rotation. Text: Attach the panels using screws (E). Rotate as shown.
Step 5
Diagram: Shows attaching horizontal panels to vertical supports using screws (B, 6 pcs). Arrows indicate insertion. Text: Attach the horizontal panels to the vertical supports using screws (B).
Step 6
Diagram: Shows attaching panels using screws (A, 8 pcs) and dowels (C, 1 pc). Arrows indicate insertion and rotation. Text: Attach the panels using screws (A) and dowels (C). Rotate as shown.
Step 7
Diagram: Shows attaching a panel to the structure using connectors (B, 2 pcs). Text: Attach the panel using connectors (B).
Step 8
Diagram: Shows two horizontal panels being attached to vertical supports. Arrows indicate insertion. Text: Attach the two horizontal panels to the vertical supports.
Step 9
Diagram: Shows attaching panels using screws (E, 10 pcs). Arrows indicate insertion and rotation. Text: Attach the panels using screws (E). Rotate as shown.
Step 10
Diagram: Shows attaching panels to the structure using screws (B, 6 pcs). Arrows indicate insertion. Text: Attach the panels to the structure using screws (B).
Step 11
Diagram: Shows a partially assembled structure with multiple horizontal and vertical panels connected.
Step 12
Diagram: Shows attaching panels using screws (A, 8 pcs) and dowels (C, 8 pcs). Arrows indicate insertion. Text: Attach the panels using screws (A) and dowels (C).
Step 13
Diagram: Shows attaching panels using screws (E, 8 pcs). Arrows indicate insertion. Text: Attach the panels using screws (E).
Step 14
Diagram: Shows how to separate drawer runners (S1, S2). Arrows indicate pulling apart and sliding. Text: Separate the drawer runners (S1, S2) by pulling and sliding them apart.
Step 15
Diagram: Shows attaching a drawer runner (S1, 1 pc) to a panel using screws (D, 2 pcs). Arrows indicate attachment. Text: Attach the drawer runner (S1) to the panel using screws (D).
Step 16
Diagram: Shows attaching drawer runners (S1, 2 pcs) to panels using screws (D, 4 pcs). Arrows indicate attachment and rotation. Text: Attach the drawer runners (S1) to the panels using screws (D). Rotate as shown.
Step 17
Diagram: Shows attaching drawer runners (S1, 2 pcs) to panels using screws (D, 4 pcs). Arrows indicate attachment and rotation. Text: Attach the drawer runners (S1) to the panels using screws (D). Rotate as shown.
Step 18
Diagram: Shows attaching a drawer runner (S1, 1 pc) to a panel using screws (D, 2 pcs). Arrows indicate attachment. Text: Attach the drawer runner (S1) to the panel using screws (D).
Step 19
Diagram: Shows attaching side panels (14, 15, 16, 17, 18) to a base panel using screws (E, 14 pcs). Arrows indicate insertion. Text: Attach the side panels (14, 15, 16, 17, 18) to the base panel using screws (E).
Step 20
Diagram: Shows attaching frame components (26, 27, 28, 33) using screws (L, 12 pcs). Arrows indicate insertion. Text: Assemble the frame using components (26, 27, 28, 33) and screws (L).
Step 21
Diagram: Shows attaching frame components using screws (M, 6 pcs) and (N, 4 pcs). Arrows indicate insertion. Text: Assemble the frame using screws (M) and (N).
Step 22
Diagram: Shows placing assembled drawer units into the main desk structure. Arrows indicate insertion. Text: Place the assembled drawer units into the main desk structure.
Step 23
Diagram: Shows attaching drawer units to the desk structure using connectors (B, 8 pcs). Arrows indicate insertion. Text: Attach the drawer units to the desk structure using connectors (B).
Step 24
Diagram: Shows attaching components using screws (D, 12 pcs) and brackets (K, 12 pcs). Arrows indicate insertion. Text: Attach components using screws (D) and brackets (K).
Step 25
Diagram: Shows attaching panels using screws (A, 12 pcs). Text: Attach the panels using screws (A). This step is repeated three times (X3).
Step 26
Diagram: Shows attaching panels using connectors (B, 12 pcs). Arrows indicate insertion. Text: Attach the panels using connectors (B). This step is repeated three times (X3).
Step 27
Diagram: Shows attaching a panel (22) to the structure. Text: Attach panel (22) to the structure. This step is repeated three times (X3).
Step 28
Diagram: Shows attaching panels using screws (E, 12 pcs). Arrows indicate insertion. Text: Attach the panels using screws (E). This step is repeated three times (X3).
Step 29
Diagram: Shows assembling a drawer box using screws (H, 3 pcs) and (I, 3 pcs). Arrows indicate insertion. Text: Assemble the drawer box using screws (H) and (I). This step is repeated three times (X3).
Step 30
Diagram: Shows attaching drawer runners (S2, 6 pcs) to drawer sides using screws (D, 12 pcs). Arrows indicate attachment. Text: Attach the drawer runners (S2) to the drawer sides using screws (D).
Step 31
Diagram: Shows attaching drawer runners to panels. Text: Attach the inner and outer drawer runners to the panels. Ensure correct orientation of the runner notch and screw positions. Install drawers in the order: "23"-Left dresser, "24"-Middle dresser, "25"-Right dresser.
Step 32
Diagram: Shows attaching hinges (J, 2 pcs) to the back panel (8) using screws (F, 4 pcs). Text: Attach hinges (J) to the back panel (8) using screws (F).
Step 33
Diagram: Shows attaching hinges (F, 8 pcs) to the main desk structure. Text: Attach hinges (F) to the main desk structure.
Step 34
Diagram: Shows attaching various components (G, 7 pcs; P, 1 pc; Q, 1 pc; R, 2 pcs) to the desk structure using screws (D, 2 pcs). Text: Attach components (G, P, Q, R) to the desk structure using screws (D).
Step 35
Diagram: Shows attaching electrical components (U, 3 pcs; V, 1 pc) to the desk structure. Text: Attach electrical components (U, V) to the desk structure.
Step 36
Diagram: Shows attaching frame components (29, 30, 31) using screws (T, 8 pcs). Arrows indicate insertion. Text: Assemble the frame using components (29, 30, 31) and screws (T).
Step 37
Diagram: Shows attaching a panel (32) to the frame using screws (N, 8 pcs). Arrows indicate insertion. Text: Attach panel (32) to the frame using screws (N).
Step 38
Diagram: Shows attaching LED light components (W, 2 pcs) to the mirror or hutch. Text: Attach LED light components (W).
? This vanity mirror has a smart LED Light (Cold, Natural, Warm) that can be adjusted in 3 colors, a short press to change the color and a long press to adjust the brightness.
Step 39
Diagram: Shows the fully assembled vanity desk with the LED mirror illuminated.
HELP CENTER
If you encounter any difficulties during assembly, please contact us.
Email: after-sale.cs@hotmail.com
DISCLAIMER
Manufacturer and seller expressly disclaim any and all liability for personal injury, property damage or loss, whether direct, indirect, or incidental, resulting from the incorrect attachment, improper use, inadequate maintenance, unapproved modification, or neglect of this product.
