fischer FIS V Zero

Injection Mortar and Anchoring Systems

FIS V Zero Injection Mortar

Fischer FIS V Zero is a high-performance injection mortar designed for reliable anchoring in various base materials, including concrete and masonry. It offers excellent load-bearing capacity and is suitable for a wide range of construction applications.

Temperature and Curing Times

The working time (t_work) and curing time (t_cure) are dependent on the ambient temperature. The following table provides typical values:

Temperature [°C]	Working Time (t_work)	Curing Time (t_cure)
-10°C to -5°C	6 h	72 h
-5°C to 0°C	2 h	24 h
> 0°C to +5°C	45 min.	12 h
+5°C to +10°C	20 min.	6 h
+10°C to +15°C	8 min.	3 h
+15°C to +20°C	5 min.	2 h
+20°C to +25°C	3 min.	1 h
+25°C to +30°C	2 min.	45 min.
+30°C to +40°C	1 min.	30 min.

Available Product Variants

FIS V Zero is available in various sizes with corresponding article numbers. FIS MR Plus is also available for use with FIS V Zero.

Volume	Type	Article No.
150 ml	FIS AM	58000
150 ml	FIS DM S Pro	563337
300 ml	FIS AM	058000
300 ml	FIS AP	058027
300 ml	FIS DB S Pro	558955 (EU)
300 ml	FIS DB S Pro	562004 (UK)
300 ml	FIS DM S Pro	563337
300 ml	KPM 2 Plus	53117
300 ml	KPM 3	541441
360 ml	FIS AM	058000
360 ml	FIS AP	058027
360 ml	FIS DB S Pro	558955 (EU)
360 ml	FIS DB S Pro	562004 (UK)
360 ml	FIS DM S Pro	563337

General Installation Guide

The following steps outline the general installation process for Fischer anchoring systems. Always refer to the specific product tables for exact dimensions and parameters. Key steps include:

Drill Hole: Drill the borehole to the specified diameter (do) and depth (ho) using a hammer drill or rotary hammer.
Clean Borehole: Thoroughly clean the borehole using a brush and an air pump or vacuum cleaner to remove all dust. This is crucial for optimal load capacity.
Inject Mortar: Dispense the injection mortar into the borehole, starting from the bottom. Ensure the borehole is adequately filled.
Insert Anchor: Insert the anchor rod, threaded rod, or reinforcing bar into the mortar-filled borehole. Rotate during insertion to ensure even mortar distribution.
Cure: Allow the mortar to cure for the specified time (tcure), which depends on the ambient temperature.
Apply Load: Once cured, attach the fixture and apply the specified installation torque (Tinst).

Anchor Systems Specifications

Fischer offers a range of anchoring systems for various applications and base materials, including concrete and masonry.

FIS A / RG M

Suitable for cracked concrete, non-cracked concrete, and masonry.

Product	Size	do [mm]	ho [mm]	db [mm]	df [mm]	Sk [-]
FIS A / RG M	M8	10	50	10	9	2
FIS A / RG M	M10	12	50	12	12	2
FIS A / RG M	M12	14	50	14	14	3
FIS A / RG M	M16	18	50	16	18	3

FIS A / RG M with FIS HK

For use with FIS HK sleeve for masonry applications.

Product	Size	do [mm]	ho [mm]	db [mm]	ttol [mm]	df [mm]	Sk [-]
FIS A / RG M + FIS HK	M8	12	55	12	0	9	6
FIS A / RG M + FIS HK	M8	12	90	12	20	9	14
FIS A / RG M + FIS HK	M8	16	90	16	0	9	14
FIS A / RG M + FIS HK	M8	16	135	16	20	9	14
FIS A / RG M + FIS HK	M10	16	90	16	0	12	18
FIS A / RG M + FIS HK	M10	16	135	16	20	12	18

FIS E

Suitable for masonry applications.

Product	Size	do [mm]	ho [mm]	db [mm]	l_E,min [mm]	l_E,max [mm]	df [mm]	Sk [-]
FIS E	M8	14	85	16	8	60	9	5
FIS E	M10	18	85	20	10	60	12	6
FIS E	M12	18	85	20	12	60	14	6

FIS H K

For use with FIS A / RG M in masonry.

Product	Size	do [mm]	ho [mm]	db [mm]	ttol [mm]	df [mm]	Sk [-]
FIS A / RG M + FIS HK	M8	16	90	16	0	9	14
FIS A / RG M + FIS HK	M8	16	135	16	20	9	14
FIS A / RG M + FIS HK	M10	16	90	16	0	12	18
FIS A / RG M + FIS HK	M10	16	135	16	20	12	18
FIS A / RG M + FIS HK	M12	20	90	20	0	14	18
FIS A / RG M + FIS HK	M12	20	135	20	20	14	18
FIS A / RG M + FIS HK	M16	20	90	20	0	18	29
FIS A / RG M + FIS HK	M16	20	135	20	20	18	29

Rebar / FRA

Anchoring systems for reinforcing bars (Rebar) and threaded rods (FRA) in concrete.

Product	Size	do [mm]	ho [mm]	db [mm]	df [mm]	Sk [-]	max T_inst [Nm]
Rebar	M12	14	90	14	18	2	40
Rebar	M16	18	90	16	22	2	60
Rebar	M20	20	90	20	26	5	120
Rebar	M24	24	90	22	32	6	150
Rebar	M25	25	90	28	35	9	150
FRA	M12	14	90	14	18	5	40
FRA	M16	18	90	16	22	14	60
FRA	M20	20	90	20	26	21	120
FRA	M22	22	90	25	32	26	150
FRA	M24	24	90	28	35	26	150
FRA	M25	25	90	30	35	26	150

RG MI

Anchoring systems for concrete applications.

Product	Size	do [mm]	ho [mm]	l_E,min [mm]	l_E,max [mm]	db [mm]	df [mm]	Sk [-]	max T_inst [Nm]
RG MI	M8	10	90	8	18	10	9	3	10
RG MI	M10	12	90	10	23	12	12	4	20
RG MI	M12	14	125	12	26	14	14	6	40
RG MI	M16	18	160	16	35	16	18	8	80

FIS A / RG M, FIS H 18 x 130/200 K, FIS H 22 x 130/200 K

Systems for masonry applications.

Product	Size	do [mm]	ho [mm]	db [mm]	df [mm]	Sk(ho,min) [-]	Sk(ho,max) [-]
FIS A / RG M	M10	18	135+t_fix	20	18	23	42
FIS A / RG M	M12	18	135+t_fix	20	18	22	41
FIS A / RG M	M16	22	135+t_fix	25	22	34	52

Certifications

Products mentioned are certified according to European Technical Assessments (ETA), such as ETA-20/0572, ETA-20/0574, and ETA-21/0267, for various applications including cracked and non-cracked concrete, and masonry use categories b, c, or d.

	Fischer FIS V Plus Injection Mortar: Technical Data, Specifications, and Installation Guide Comprehensive technical specifications, installation instructions, and product details for the Fischer FIS V Plus chemical injection mortar system, including data on concrete and masonry applications, rebar connections, and various product variants.
	Fischer Injection Mortar FIS VW Plus, FIS V Plus, FIS VS Plus: Curing and Processing Times Detailed technical data for Fischer injection mortars including FIS VW Plus, FIS V Plus, and FIS VS Plus. Find processing and curing times based on anchoring base temperature.
	Fischer FIS VW Plus High Speed and FIS V Plus Mortar Curing Times Technical data on curing times for Fischer FIS VW Plus High Speed and FIS V Plus high-performance mortars, detailing processing and curing times based on temperature.
	fischer FIS EM Plus: Epoxy Mortar for Adhesive Anchoring Systems Comprehensive installation guide and technical specifications for the fischer FIS EM Plus epoxy adhesive anchoring system, detailing applications, performance data, and installation procedures for concrete and rebar connections.
	Fischer FIS EP Injection System: Declaration of Performance and Technical Assessment Official Declaration of Performance (DoP) and European Technical Assessment (ETA) for the Fischer FIS EP injection system, a bonded fastener for concrete applications. Details technical specifications, installation guidelines, and performance data for construction professionals.
	fischer Bolt Anchor FBN II HDG: European Technical Assessment ETA-18/0101 Detailed technical assessment for the fischer Bolt Anchor FBN II HDG, covering product description, specifications, intended use, performance data, installation, and durability for use in uncracked concrete.
	fischer Bolt Anchor FWA Plus: Declaration of Performance and Technical Specifications This document provides the Declaration of Performance for the fischer Bolt Anchor FWA Plus, detailing its technical specifications, mechanical resistance, safety in case of fire, and installation guidelines for use in concrete.
	Fischer UltraCut FBS II 8-14 GVZ/CP: Technical Data and Installation Guide Comprehensive technical specifications and installation instructions for the Fischer UltraCut FBS II 8-14 GVZ/CP screw anchor, detailing performance parameters, dimensions, and application guidelines for various concrete and masonry substrates.