IKEA KOMPLEMENT Shelf Assembly Instructions
Product Dimensions: 58 cm (22 5/6")
Required Tools and Parts
The assembly requires a screwdriver. The following parts are needed for installation:
- 6x Shelf supports (Part numbers: 115344, 101558, 10077788, 139200)
A person is shown holding a screwdriver with a cross-head tip.
[?] A person is depicted contemplating a box, followed by a scene of a person holding the box and looking towards IKEA buildings, suggesting a need for guidance or purchase.
Assembly Steps
Step 1: Install Shelf Supports
This step involves attaching the shelf supports to the interior of a cabinet.
A tall cabinet is shown. A close-up view illustrates attaching a shelf support to the pre-drilled holes on the cabinet's side panel. The support is inserted into the holes, and then a screw is used to secure it. The process involves turning the screw to tighten the support.
Two smaller diagrams illustrate correct and incorrect installation. The correct method shows the support properly seated and secured. The incorrect method, marked with a red cross ❌, shows a hand indicating a misaligned or improperly fitted support, suggesting a gap or incorrect placement.
