PAX Wardrobe Assembly Instructions

Tools Required

• ? Screwdriver
• ? Hammer
• ? Spirit Level
• ? Ladder
• ?️ Clamp
• ? Power Drill
• ? Drill Bit (Ø 1/4" / 5 mm)
• ? Tape Measure

Safety and Handling

⚠️ Always follow safety guidelines to prevent injury or damage. Ensure you have adequate space and assistance.

Two people are recommended for assembly and lifting. ??

Protect your floor during assembly. ✋

Check all parts against the parts list before starting. If any parts are missing or damaged, contact IKEA.

Do not climb on the furniture during or after assembly. ❌?

Parts List

Refer to the numbers in the diagrams for identification.

• 100229 Screws (12x)
• 195701 Handle (1x)
• 101375 Dowels (12x)
• 100644 Screws (4x)
• 100402 Screws (4x)
• 151705 Screws (4x)
• 151706 Screws (4x)
• 10080579 Screws (8x)
• 101558 / 115344 Brackets/Clips (8x)
• 10093081 Shelf Supports (16x)
• 10093082 Shelf Supports (16x)
• 10123654 Clips (8x)
• 100751 Base Plates (2x)
• 122972 / 115345 Screws (4x)
• 110618 Base Panels (2x)
• 110617 Base Panels (2x)
• 10124988 Panels (2x)

Assembly Steps

1 Prepare Panels

Lay out two large panels on a protected surface. Insert 8 dowels (101375) into the pre-drilled holes on the edges of the panels as shown.

2 Attach Base Plates

Place two base plates (100751) onto the panels. Use a hammer to gently tap them into place, ensuring they align with the dowels. A diagram shows a circular component being tapped with a hammer.

3 Attach Base Panels

Insert screws (110618) into the base panels (110617). Attach these to the assembled base structure. The diagram shows two types of base components being screwed in, with a "Click!" sound indicated.

4 Insert Dowels

Insert two dowels (101375) into the designated holes on the edge of a long panel, as illustrated.

5 Connect Panels

Attach a side panel to the base structure using screws. The diagram shows a panel being attached with screws and a dowel inserted previously.

6 Assemble Frame (Part 1)

Connect a side panel to the base assembly. Insert screws (100229) and cam locks (195701) into the corresponding holes. Turn the cam locks to secure the connection. The diagram shows two screws and two cam locks being used.

7 Assemble Frame (Part 2)

Attach another side panel to the base assembly using screws (100229) and cam locks (195701), similar to the previous step.

8 Assemble Frame (Part 3)

Connect the second main side panel to the base assembly using screws (100229) and cam locks (195701).

9 Attach Back Panel

Slide the back panel into the grooves of the assembled frame. Arrows indicate the direction of insertion. The diagram shows two people positioning the back panel.

10 Secure Back Panel

Secure the back panel using screws (100229) and cam locks (195701). The diagram shows screws being inserted and cam locks being turned.

11 Insert Shelf Supports

Insert 16 shelf supports (10093081 and 10093082) into the pre-drilled holes inside the wardrobe frame at desired heights.

12 Position Frame

With assistance, carefully lift and position the assembled wardrobe frame upright. The diagram shows two people lifting the frame.

13 Wall Mounting Preparation

Position the wardrobe frame against the wall. Measure the required height for wall mounting: 79 9/16" - 80 3/4" (202-205 cm) from the floor to the top of the unit. A tape measure is shown. A diagram shows a person lifting a tall panel into position, with height indicators.

14 Secure Base to Wall

Align the wardrobe frame with the wall. Secure the base of the unit to the wall using the provided bracket and screws (1x). A diagram shows a drill and drill bit (Ø 1/4" / 5 mm) and the attachment of a bracket to the frame and wall.

15 Attach Top to Wall

Secure the top of the wardrobe frame to the wall using screws (100229) and cam locks (195701). The diagram shows two screws and two cam locks being used.

16 Connect Second Unit (Start)

Position a second wardrobe frame next to the first. The diagram shows two frames side-by-side.

17 Secure Second Unit to Wall

Attach the second wardrobe frame to the wall using screws (100229) and cam locks (195701).

18 Slide in Second Back Panel

Slide the back panel into the grooves of the second wardrobe frame.

19 Secure Second Unit Frame

Connect the second wardrobe frame to the first unit using screws (100229) and cam locks (195701).

20 Insert Shelf Supports (Second Unit)

Insert 16 shelf supports (10093081 and 10093082) into the pre-drilled holes inside the second wardrobe frame.

21 Attach Adjustable Feet

Attach 2x adjustable feet to the bottom of the wardrobe. ⚠️ Ensure the unit is stable and properly secured to prevent tipping.

22 Install Shelves (Unit 1)

Place shelves onto the shelf supports in the first wardrobe unit. Secure them using screws (101558 / 115344).

23 Install Shelves (Unit 2)

Place shelves onto the shelf supports in the second wardrobe unit. Secure them using clips (4x).

24 Unit Dimensions

Diagram shows two wardrobe units side-by-side with a dimension of 13 3/4" (350 mm) between them.

25 Connect Units

Align the two wardrobe units. Connect them securely using screws (122972 / 115345) at the indicated points. The diagram shows two screws being inserted into the sides of the units.

26 Prepare for Hinges

Drill pilot holes for the hinge mounting plates using a Ø 1/4" (5 mm) drill bit. Attach the hinge mounting plates to the wardrobe frame using screws. The diagram shows a drill and the attachment of plates.

27 Attach Hinge Plates

Continue attaching hinge mounting plates to the wardrobe frame as shown in the diagram.

28 Secure Hinges

Attach screws (100644 and 100402) to secure the hinge components to the wardrobe frame.

29 Install Hinge Components

Install the remaining hinge components (10123654 and 10080579) onto the wardrobe frame. The diagram shows screws and clips being attached.

30 Attach Top/Bottom Panels

Attach the top and bottom panels (10124988) to the wardrobe structure. Secure them as indicated. The diagram shows a panel being attached and secured with screws.

31 Final Top Panel Attachment

Attach the final top panel using screws (151706 and 151705). The diagram shows screws being inserted into a panel and then attached to the unit.

32 Completed Wardrobe

The assembled wardrobe unit is shown. The overall height is approximately 22 7/8" (58 cm) for this specific configuration shown in the diagram.