KOMPLEMENT

Parts and Tools

Tools Required:

• Phillips head screwdriver ?
• Flathead screwdriver ?

Components Included:

• 6x Dowel (Part No. 118331)
• 2x Screw (Part No. 109545)
• 6x Bracket component (Part No. 101558)
• 3x Cam lock (Part No. 10077788)
• 3x Cam lock housing (Part No. 115344)
• 3x Dowel (Part No. 103430)
• 3x Dowel (Part No. 106720)
• 3x Dowel (Part No. 101345)

Assembly Instructions

Step 1: Prepare Panels

Insert three dowels (Part No. 101345) into the pre-drilled holes on one edge of a panel. Insert three dowels (Part No. 118331) into the pre-drilled holes on another edge of a second panel. For one of these panels, rotate the inserted dowels with a screwdriver to secure them.

Step 2: Assemble Base and Side

Attach a side panel to a base panel. Insert three cam locks (Part No. 10077788) into the large holes on the side panel. Insert three cam lock housings (Part No. 115344) into the corresponding holes on the base panel. Connect the panels and tighten the cam locks with a screwdriver to secure.

Step 3: Prepare Divider Panel

Fold the main divider panel as shown in the diagram.

Step 4: Attach Brackets to Wardrobe

Secure six bracket components (Part No. 101558) to the interior side panels of the wardrobe frame at designated positions (marked 23, 24, 25). Insert the three cam lock housings (Part No. 115344) into the pre-drilled holes on the divider panel.

Step 5: Mount Divider Panel

Connect the divider panel to the brackets attached to the wardrobe side panels. Secure by tightening the cam locks. This process is repeated for both sides of the wardrobe.

Step 6: Attach and Secure Top Panel

Insert three dowels (Part No. 118331) into the pre-drilled holes on the top panel. Insert three cam locks (Part No. 103430) into the designated holes on the top panel. Connect this panel to the main structure and tighten the cam locks using a screwdriver. Finally, secure the top panel by inserting and tightening two screws (Part No. 109545) into the pre-drilled holes.