MAGCUBIC HY300X Smart Projector

Attention and Safety Precautions

Please read this manual carefully before use and keep it for future reference.

• The projector is not dustproof or waterproof.
• To reduce the risk of fire and electric shock, do not expose the projector to rain and fog.
• Please use the original power adapter. The projector should operate under the specified rated power supply.
• When the projector is working, do not look directly into the lens; the strong light can cause temporary discomfort to your eyes. Children should use the projector under adult supervision.
• Do not cover the projector vents. Overheating can reduce the projector's lifespan and cause danger.
• Regularly clean projector vents, as dust may cause cooling malfunctions.
• Do not use the projector in greasy, damp, dusty, or smoky environments. Oil or chemicals can cause malfunctions.
• Handle with care during daily use.
• Please disconnect the power if the projector is not in use for a long time.
• Non-professionals are forbidden to disassemble the projector for testing and maintenance.

Structure Description

This manual is for reference only. It is subject to change without prior notice. The company reserves the right of final interpretation.

Remote Component and Functions

The remote control provides access to all projector functions. Key components include:

• Lens: The projection lens.
• ON/OFF Button: Powers the projector on or off.
• Electronic Focus: Adjusts the focus of the projected image.
• Directional Buttons (Up, Down, Left, Right): Navigate through menus and options.
• OK Button: Confirms selections.
• USB Port: For connecting USB storage devices.
• HDMI Port: For connecting external video sources via HDMI.
• Power Button: Main power switch.
• Volume Up/Down (+/-): Adjusts audio volume.
• MUTE Button: Silences audio output.
• Switch to mouse control: Toggles a mouse pointer mode for easier navigation in certain applications.
• MENU Button: Opens the main settings menu.
• RETURN Button: Goes back to the previous screen or menu.
• HOME Button: Returns to the main home screen.
• App Store Button: Directly accesses the application store.

Note: The physical layout of buttons may vary slightly.

App Store

The App Store allows for one-click installation of applications. Once installed, they can be used directly. MAGCUBIC provides a selection of pre-loaded applications for easy access and convenience.

Projection Settings

Access via Settings > Projector Setting. This section allows configuration of:

• Projection Mode: Sets the projection orientation (e.g., Front Projection, Rear Projection).
• Display Settings: Adjusts display-related options.
• Installation Mode: Configures how the projector is mounted (e.g., Ceiling Mount).
• Digital Scaling: Adjusts image size digitally.
• Auto Trapezoidal Correction: Automatically corrects keystone distortion.
• Manual Trapezoidal Correction: Allows manual adjustment of keystone distortion.
• Reset Trapezoidal Correction: Resets keystone correction to default.

BT (Bluetooth) Setting

Access via Settings > BT Setting. Enable Bluetooth by switching BT to "ON". Click "Refresh Device" to search for available devices and select the desired device to pair.

Networking Setting

Access via Settings > Networking Setting > WIFI Setting. Enable WIFI by switching WIFI to "ON". Select the desired WIFI ID and input the password to connect to the internet.

Language Setting

Access via Settings > Language Setting. Here you can set the system language and select the input method. Options include English (United States) and various input methods like the Android Keyboard.

Date and Time Setting

Access via Settings > Date and Time Setting. Configure the Date, Time, and choose whether to use the 24-hour format. Time zone selection is also available.

Other Settings

Access via Settings > Other Settings. This menu includes:

• Button Sound: Enable or disable sound feedback for button presses.
• Screen Saver: Configure screen saver activation time. The projector enters screen saver mode after a set period of inactivity. Pressing any key exits screen saver mode.
• Timed Shutdown: Set a schedule for the projector to automatically turn off.
• Restore Factory Settings: Resets all settings to their original factory defaults.

System Information

Access via Settings > System Information. View details such as UI version, Resolution, Running Memory, and Storage Space.

HDMI Signal

After connecting the projector to another output device via HDMI, you can select the input source (e.g., HDMI or Audio/Video) in the settings.

Wireless Screen

To use wireless screen mirroring, ensure your Android device (phone, tablet, etc.) is on the same local wireless LAN as the projector. Operations typically involve navigating to Home Screen > My Apps > ScreenCast, opening the ScreenCast service, turning on phone mirroring, and establishing a connection. Supported protocols include Android Wireless (Miracast) and Apple AirPlay.

Note: The projector's IP address is displayed as 0.0.0.0 for the connected device name "Projector-5763" in an inactive state, with a link to https://transcreen.app.

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy. If not installed and used according to instructions, it may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment causes harmful interference to radio or television reception, which can be determined by turning the equipment off and on, users are encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

IC Statement

This device complies with Innovation, Science and Economic Development Canada's licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

French Translation: "Le présent appareil est conforme aux CNR d'innovation, sciences et développement économique Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement."

Radiation Exposure Statements

IC Radiation Exposure Statement: This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.

FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.

French Translation (IC Radiation Exposure): "Cet équipement est conforme aux limites d'exposition aux radiations IC établies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec une distance minimale de 20 cm entre le radiateur et votre corps."

Usage Restriction: Operating in the 5150-5250 MHz band shall only be used indoors to reduce the potential for harmful interference to co-channel mobile satellite systems.

French Translation (Usage Restriction): "L'utilisation dans la bande 5150-5250 MHz ne doit être effectuée qu'à l'intérieur des bâtiments afin de réduire le risque d'interférences nuisibles aux systèmes de satellites mobiles fonctionnant sur le même canal."

Disclaimer

This manual provides general instructions. The pictures and functions described herein are subject to the actual product. MAGCUBIC is dedicated to improving product performance and reserves the right to modify product functions and interfaces without prior notice. Please handle your device properly. The company is not responsible for any loss caused by incorrect software/hardware operation, repair, or other reasons. The company is not responsible for any third-party claims. This manual has been carefully checked by professional engineers; please understand any inevitable omissions.

Safety Instructions

Please pay attention to important information related to the operation and maintenance of the projector. Reading this information carefully will help avoid problems and increase the projector's lifespan.

• Consult qualified personnel for installation and repair services. Do not use damaged wires, accessories, or other peripherals.
• Keep the projector away from flammable, explosive materials, and strong electromagnetic interference sources (e.g., large radar stations, power stations, substations). Avoid strong ambient light, such as direct sunlight.
• Do not cover projector vents.
• Use only the original power adapter.
• Ensure adequate ventilation and that vents are not covered to prevent overheating.
• When the projector is working, do not look directly into the lens, as the strong light can cause slight eye discomfort.
• Do not bend or drag the power cord.
• Do not place the power cord under the projector or heavy objects.
• Do not cover the power cord with soft materials.
• Do not heat the power cord.
• Avoid touching the power adapter with wet hands.

Customer Support

Thank you for your purchase! For assistance, please email our Brand Support Team at support@magcubic.com, including the item name in your email for a prompt reply and further assistance.