WALI CM4290 Heavy-Duty TV Ceiling Mount

Safety Precautions and Warnings

Please read the entire instruction manual before starting installation and assembly. If you have any questions regarding any of the instructions or warnings, please contact your local distributor for assistance.

• ⚠️ CAUTION: Use with products heavier than the rated weights indicated may result in instability causing possible injury ?.
• Mounts must be attached as specified in assembly instructions. Improper installation may result in damage ? or serious personal injury ?.
• ⛑️ Safety gear and proper tools ? must be used. This product should only be installed by professionals ?‍?.
• This product is designed to be installed on wood stud walls, solid concrete walls or brick walls ?.
• Make sure that the supporting surface ?️ will safely support the combined weight of the equipment and all attached hardware and components.
• Use the mounting screws provided and DO NOT OVER TIGHTEN ?? mounting screws.
• This product contains small items ? that could be a choking hazard ⚠️? if swallowed. Keep these items away from children ?❌.
• This product is intended for indoor use only ?. Using this product outdoors ? could lead to product failure ❌ and personal injury ?.

Important Notes and Maintenance

• ❗ IMPORTANT: Ensure that you have received all parts according to the component checklist ✅ prior to installation. If any parts are missing or faulty ❓, telephone your local distributor for a replacement ?.
• ⚙️ MAINTENANCE: Check that the bracket is secure and safe ? to use at regular intervals ?️ (at least every three months 3️⃣ ?️).

Component Checklist

Ensure all parts are present before installation:

• Ceiling mount plate (01) x1
• Column 1 (02) x1
• Column 2 (03) x1
• Adaptor (04) x1
• Mounting plate (05) x1
• Bracket (06) x2
• Locking bar (07) x1
• M8x75mm screws (A) x3
• M8 nuts (B) x2
• M6x12mm screws (C) x4
• M6 nuts (D) x4
• 8mm washers (E) x10
• Wing nut (F) x1
• Spacer (G) x4
• 8x60mm screw (H) x1
• Split cotter pin (I) x1
• M6x60mm screws (J) x4
• M5x14mm screws (K) x4
• M6x14mm screws (L) x4
• M6x30mm screws (M) x4
• M8x20mm screws (N) x4
• M8x30mm screws (O) x4
• Spacer (P) x4
• Spacer (Q) x4
• 6mm washers (R) x4

Assembly Instructions

Step 1: Attach Ceiling Mount Plate

Description: The ceiling mount plate (01) is attached to the ceiling structure using screws (A). An arrow indicates the direction of attachment.

[Diagram 1: Ceiling mount plate attachment]

Step 2: Attach Column 1 to Ceiling Mount Plate

Description: Column 1 (02) is attached to the ceiling mount plate (01) using screws (A), washers (E), and nuts (B). Safety checks are indicated with checkmarks (✔️) and incorrect methods with crosses (❌).

[Diagram 2: Column 1 attachment to ceiling plate]

Step 3: Attach Column 2 and Adaptor

Description: Column 2 (03) is attached to Column 1 (02) using screws (C) and nuts (D). The Adaptor (04) is then attached to Column 2 using screws (M) and nuts (D).

[Diagram 3: Column 2 and Adaptor attachment]

Step 4: Attach TV Brackets to TV

Description: The TV brackets (06) are attached to the back of the TV. This step involves selecting the appropriate screws (K, L, M, N, O), spacers (P, Q), and washers (R) based on the TV's VESA mounting hole pattern (e.g., 200x200mm, 400x400mm, 800x400mm) and the TV's back panel design.

[Diagram 4: Attaching TV brackets to TV]

Step 5: Attach Mounting Plate and Secure

Description: The mounting plate (05) is attached to the assembled column structure. The locking bar (07) is inserted, and then secured in place with the split cotter pin (I), ensuring the opening of the cotter pin faces downwards.

[Diagram 5: Mounting plate attachment and locking bar securing]

Step 6: Mount TV to Assembly

Description: The TV, with the brackets attached, is lifted and hung onto the main mounting plate assembly. This is shown in two parts (6a and 6b).

[Diagram 6a: Lifting TV to mount]

[Diagram 6b: Hanging TV onto mount]

Step 7: Final Check

Description: A final view of the fully assembled TV ceiling mount with the TV securely attached.

[Diagram 7: Final assembled TV ceiling mount]

Support

For support or inquiries, please contact WALI at support@walielectric.com.