Audio Authority 9A60A User Manual

Product Overview

This document is the user manual for the Audio Authority Model 9A60A, a VGA to Component Video Converter. It is designed to adapt a VGA-type RGBHV video signal to a YPbPr Component Video signal for use with High Definition Television (HDTV) monitors.

The 9A60A acts as a transcoder, performing a direct conversion from one signal type to another. It is not a format converter, scaler, or video processor, meaning it passes horizontal and vertical synchronization timings and pixel content from the source to the output without modification. For example, to display a 1080i YPbPr image, the source must provide a 1080i RGBHV signal.

Commonly accepted NTSC/ATSC broadcast resolutions in the United States include 640x480 @ 60Hz, 1280x720 @ 60Hz, and 1920x1080 @ 60Hz.

Device Description

The device is a compact, rectangular unit with a black casing. On the front panel, there is a 15-pin VGA input connector labeled 'VGA INPUT (RGBHV)' and a DC power input jack labeled '12V DC POWER'. The top panel features the 'Audio Authority' logo and the model name 'Model 9A60A' printed as 'High Definition VGA to Component Video Converter'. The output connectors are labeled 'Pr', 'Pb', and 'Y' on the rear or side panel, indicating component video outputs. The device is shown with a connection diagram indicating it converts VGA input to YPbPr output. It is marked 'Made in the USA' and displays a phone number (800-322-8346) and website (www.audioauthority.com).

Features

• High bandwidth circuitry
• Accepts RGB signals including computer VGA and RGBHV
• Output sync is Bi-level sync
• Converts video format but does not alter resolution or refresh rate

Package Contents

Before use, verify the shipping carton contains:

• 9A60A video converter
• 12V DC power adapter
• User manual

Note: Retain original packing material for potential returns. Contact Audio Authority immediately if any items are missing, providing the model number and invoice.

Installation

1. Connect the 9A60A to the video source using the supplied VGA cable and connect the 12V power pack.
2. Connect the output of the 9A60A to the YPbPr component video input jacks on the television or monitor.
3. Configure your source equipment to output an appropriate television broadcast resolution for your region.

Connection Diagram

A typical setup involves connecting a PC's VGA output via a VGA cable to the 9A60A's input. The 9A60A's YPbPr outputs are then connected via RCA patch cords to the corresponding inputs on a Video Display.

Supported Resolutions

Note: Most high definition televisions that accept progressive video typically have a maximum vertical refresh rate of 60Hz. Avoid sending higher rates from your PC.

If your video driver does not support required resolutions, third-party software like PowerStrip (Windows, www.entechtaiwan.com) or DisplayConfigX (Mac, www.3dexpress.de) may be available for download. If sources do not allow output resolution changes, consider Audio Authority's video scaling products (e.g., Model 1366).

[Warning] Caution: Do not operate the monitor with an unstable picture, as this may damage the display equipment.

Troubleshooting

For further assistance, contact the Audio Authority Technical Service department via email at support@audioauthority.com or by phone at 800-322-8346 or 859-233-4599.

Specifications

Warranty Information

Limited Warranty

Audio Authority warrants its consumer products against defects in materials or workmanship for one year from the original sale date. Audio Authority will replace defective products at no cost, covering ground freight for the replacement unit. A copy of the invoice showing the item number and purchase date (proof-of-purchase) is required for in-warranty claims.

Units failing after the warranty period may be returned for repair at a nominal charge, provided they are not damaged beyond repair. All freight charges for out-of-warranty returns are the customer's responsibility. Units must have a Return Authorization Number assigned by the factory.

This warranty is limited and does not cover products that have been damaged, altered, abused, misused, or improperly installed. Audio Authority disclaims all other warranties, express or implied, including warranties of merchantability or fitness for a particular purpose. No allowances or credits are provided for field service or installation performed by the end user.

Warranty Service Procedures

To report a suspected product defect, contact Audio Authority's Technical Service Department at 800-322-8346 or 859-233-4599. If a defect is suspected, a replacement unit will be shipped on a defect-exchange basis, and a Return Authorization Number will be issued for the return of the defective product. Replacement units are charged to the customer's credit card at the time of shipment and will be credited upon receipt and evaluation of the defective unit under warranty conditions. Return freight charges for the defective unit are the customer's responsibility.

Audio Authority appreciates customer confidence and strives to meet or exceed customer needs.

Regulatory Compliance

The included 9A60A power supply has been tested for compliance with UL, CE, and CSA rules and regulations. The product is also RoHS compliant.

Contact Information

For questions or assistance not covered in this manual, contact Audio Authority:

Audio Authority Technical Service
Phone: 800-322-8346 (M-F, 8:30 AM - 5:00 PM EST)
International Phone: 859-233-4599
Fax: 859-233-4510
Email: support@audioauthority.com

Audio Authority Corporation
2048 Mercer Road
Lexington, Kentucky 40511-1071
USA

Website: www.audioauthority.com