Hiboy S2 SE E-Scooter User Manual
Model: S2 SE
Important Safety Information
Read this manual carefully before operating the Hiboy S2 SE E-Scooter. Always wear protective gear, including a helmet ?. Understand local regulations regarding electric scooters. Do not operate under the influence of alcohol or drugs. Ensure the scooter is in good working condition before each ride.
Product Overview
The Hiboy S2 SE is a personal electric scooter designed for urban commuting and recreational use. It features a foldable design for portability and a rechargeable battery system.
Key Components:
- Handlebar: Contains throttle, brake lever, and display.
- Stem: Connects handlebars to the main body.
- Deck: Footboard for standing.
- Front Wheel: Provides steering and stability.
- Rear Wheel: Drives the scooter.
- Brake System: Typically a rear fender brake or electronic brake.
- Battery: Powers the motor.
- Kickstand: Supports the scooter when parked.
Setup and Charging
Unfolding the Scooter:
- Locate the folding mechanism near the base of the stem.
- Release the latch and unfold the stem until it locks securely into place.
- Ensure the handlebar is properly attached and tightened.
Charging the Battery:
The Hiboy S2 SE comes with a charger. Connect the charger to the charging port on the scooter and plug it into a wall outlet. A full charge typically takes several hours. The indicator light on the charger will change color when charging is complete. Do not overcharge.
Operation
Getting Started:
- Ensure the scooter is fully charged and unfolded.
- Stand on the deck with one foot.
- Use the other foot to push off the ground.
- Once moving, gently press the throttle lever (usually on the right handlebar) to accelerate ▶️.
- To brake, release the throttle and gently squeeze the brake lever ?.
Display Information:
The display typically shows speed, battery level, riding mode, and mileage. Refer to specific icons for details [display-icons-guide].
Riding Modes:
The S2 SE may offer different riding modes (e.g., Eco, Standard, Sport) to adjust speed and power. Select the desired mode using the control buttons ⚙️.
Maintenance and Care
- Cleaning: Wipe the scooter with a damp cloth. Avoid using high-pressure water or immersing the scooter.
- Tires: Check tire pressure regularly. Refer to tire sidewall for recommended pressure.
- Battery: Store the battery in a cool, dry place. Avoid extreme temperatures.
- General Inspection: Periodically check all screws and bolts for tightness ✔️.
Troubleshooting
Common Issues:
- Scooter not turning on: Check battery charge. Ensure the power button is pressed correctly.
- Weak acceleration: Battery may be low. Check for obstructions.
- Brakes not engaging: Ensure brake lever is functioning. Check for wear on brake pads (if applicable).
For further assistance, consult the Hiboy support website or contact customer service.
Specifications
| Feature | Specification |
|---|---|
| Model | S2 SE |
| Max Speed | 19 mph (30 km/h) |
| Range | Up to 17 miles (27 km) |
| Motor Power | 350W |
| Battery Capacity | 270 Wh |
| Weight Capacity | 220 lbs (100 kg) |
| Tire Size | 8.5 inch |
| Braking System | Rear Disc Brake & Electronic Brake |
| Weight | 30 lbs (13.6 kg) |
Warranty and Support
Hiboy offers a limited warranty on its products. Please refer to the warranty card included with your purchase or visit the official Hiboy website for detailed terms and conditions.
For customer support, please visit the Hiboy website or contact their authorized service centers.
