About This Product
This document provides essential information for the installation and safe operation of the Lucci Tread LED Steplight. It is crucial to read and follow all instructions carefully to ensure correct function and safety. Please retain these instructions for future reference.
Warranty Information
The Lucci Tread LED Steplight is backed by a 3-year warranty from the date of purchase. To maintain warranty coverage, proof of purchase and installation by a licensed electrician are required. The warranty is void if the product is misused, modified, or used with dimmer switches. Failure to adhere to these instructions may result in damage or injury and will void the warranty.
Installation Requirements
- Installation must be performed by a licensed electrician.
- All wiring and installation must comply with local and national electrical codes, such as AS/NZS 3000:2007/Amendment 2:2012.
- This fitting is rated IP54 and must maintain this rating during installation.
- Do not use with dimmer switches.
- Ensure proper clearance values are maintained as per the specifications.
- Do not cover the LED fitting with thermal insulation material.
- Handle with care during unpacking to avoid damaging electrical connections.
- Check for any transport damage before installation.
- Always switch off power to the circuit before commencing any electrical work.
Key Specifications
- SKU Numbers: 239333, 239334, 239335
- Rated Voltage: 220-240V~ 50Hz
- IP Rating: IP54
- Cut Out Size: 74mm (springs) / 78mm (moulded box)
Safety Precautions
- Always ensure power is OFF and the fitting has cooled before maintenance or cleaning.
- Secure all power leads and screws before connecting power.
- Avoid contact with corrosive chemicals.
- Clean with a damp cloth; do not immerse in water.
