Contact Us
For questions about the installation of YITAHOME® products, please contact YITAHOME:
Phone: +1(888)717-8084 (Mon-Fri 8:00 AM-16:30 PM PST / Sat. 8:00 AM-12:00 PM PST)
Email: after-sale.cs@hotmail.com
For Amazon.com orders, use the following method:
- Log into your Amazon account.
- Go to "Your Orders" and find the purchase.
- Click on "Contact Seller".
Important Notice
- Follow all installation instructions carefully. Please confirm all accessories are present before installation.
- Do not fully tighten screws during initial assembly. Gently adjust the board and frame to make them level. Only tighten after all pieces are correctly assembled.
- If you encounter any problems during installation, refer to the installation video tutorial on the Amazon product page or contact YITAHOME customer service.
Parts List
| Item No. | Reference Image Description | Quantity |
|---|---|---|
| 1 | Shelf Panel | X1 |
| 2 | Shelf Panel | X3 |
| 3 | Shelf Panel | X1 |
| 4 | Side Panel | X4 |
| 5 | Back Panel | X4 |
| 6 | Support Rod | X4 |
| A | Cam Lock | X8 |
| B | Screw M5*50 | X8 |
| F | Screw M6*30 | X20 |
| J | Screw M6*55 | X4 |
| Y | Wooden Dowel | X4 |
| Z | Small Screw | X2 |
| W | Cam Lock Bolt | X16 |
Assembly Steps
Step 1
Insert wooden dowels (Y) into the designated holes on shelf panels (3). (Diagram shows 4 dowels inserted into a panel).
Step 2
Connect side panels (3) to shelf panels (3). Secure using cam locks (A) and cam lock bolts (W), and screws (B) and (F). (Diagram shows two side panels attached to a shelf panel, with hardware indicated).
Step 3
Assemble the first section of the bookshelf. Attach shelf panel (3) to side panels (6) using screws (F). (Diagram shows a U-shaped structure being formed).
Step 4
Attach shelf panel (2) to the structure. Secure with cam locks (A), cam lock bolts (W), and screws (F). (Diagram shows a horizontal shelf being added to the U-shaped structure).
Step 5
Continue assembly with side panels (4) and shelf panels (5). Use screws (B), (F), and cam locks (W) for securing. (Diagram shows building upwards with more panels and hardware).
Step 6
Assemble the next section using shelf panel (6) and screws (F) and (J). (Diagram shows adding another horizontal shelf element).
Step 7
Attach shelf panel (2) to the assembled structure. Secure using cam locks (A), cam lock bolts (W), and screws (F). (Diagram shows adding a horizontal shelf to the existing structure).
Step 8
Assemble the next section using side panels (4), shelf panels (5), and screws (B), (F), and cam locks (W). (Diagram shows further vertical and horizontal assembly).
Step 9
Attach shelf panel (6) using screws (F) and (J). (Diagram shows adding another horizontal shelf element).
Step 10
Attach shelf panel (2) to the structure. Secure using cam locks (A), cam lock bolts (W), and screws (F). (Diagram shows adding a horizontal shelf to the existing structure).
Step 11
Continue assembly with side panels (4), shelf panels (5), and screws (B), (F), and cam locks (W). (Diagram shows building upwards with more panels and hardware).
Step 12
Assemble the final section using shelf panel (6) and screws (F) and (J). (Diagram shows adding the final horizontal shelf element).
Step 13
Attach the top shelf panel (1) to the structure. Secure using cam locks (A), cam lock bolts (W), and screws (F). (Diagram shows the top shelf being attached).
Step 14: Anti-Tip Installation
Attention: For safety and stability, it is strongly recommended to secure the anti-tip accessories to the wall. This will help prevent tipping, potential injury, and property damage. (Diagram shows anti-tip hardware being attached to the bookshelf and a wall).
Installation Completed
Your YITAHOME 5-Tier S-Shaped Bookshelf is now assembled.
