ASSEMBLY INSTRUCTIONS

Parts Included

• Armrest (A x2): Two armrest components, each featuring connection points labeled 'A'.
• Main Sofa Body (B x1): The central section of the sofa, with connection points labeled 'B'.
• Leg (C x4): Four individual legs, each with connection points labeled 'C'.
• Screw (D x12): Twelve screws for assembly.
• Wrench (E x1): One tool provided for tightening screws.
• Spacer (F x12): Twelve spacers, likely used with screws.

Assembly Steps

Step 1: Preparation

Examine the main sofa body (B). Locate and open the zipper on the sofa body. Retrieve the following parts: Armrests (A), Legs (C), Screws (D), and the Wrench (E). The diagram illustrates connection points labeled 'A', 'B', 'C', 'D', 'E', and 'F' on the sofa frame and components.

Step 2: Attaching Armrests

Position the main sofa body (B) upright. Take one armrest (A) and align its connection points with the corresponding points on the side of the sofa body. Repeat this process for the second armrest (A) on the opposite side. Use the provided Screws (D) and Wrench (E) to secure the armrests to the sofa body, following the indicated alignment.

Step 3: Final Assembly

Attach the Legs (C) to the underside of the sofa body (B). Ensure they are firmly screwed in. The diagram shows the fully assembled sofa with all components connected and in place. Verify that all screws are tightened and the sofa is stable.