Assembly Instruction
ITEM NO.: 8517BRW/GRY/PWT-3
Product: Double Reclining Sofa
Assembly Preparation
Hardware is stored at the bottom of the sofa. Please retrieve it for assembly.
Important Note: Do not use power tools for assembly. Power tools increase the risk of over-tightening, which can lead to splitting or cracking the wood.
Component List
| No. | Description | Qty |
| A | SEAT | 1 |
| B | LSF BACK REST | 1 |
| C | MIDDLE BACK REST | 1 |
| D | RSF BACK REST | 1 |
Assembly Steps
-
Step 1
Attach the back rests (B, C, D) to the seat base (A). Align the metal brackets on the back rests with the corresponding slots on the seat base and push down firmly until they click into place. Ensure each back rest is securely attached.
Visual Description: The image shows the three back rests (labeled B, C, and D) being lowered onto the seat base (labeled A). Arrows indicate the direction of insertion for each back rest into the seat base.
-
Step 2
Confirm all back rests (B, C, D) are securely attached to the seat base (A). The image shows a close-up of the connection mechanism, indicating a secure fit.
Visual Description: The image shows the fully assembled sofa with all back rests (B, C, D) attached to the seat base (A). A magnified view shows the interlocking mechanism for attaching the back rests.
-
Step 3
To recline the sofa, pull the lever located on the side of the sofa. The image shows the reclining mechanism and the "ON-PULL" instruction.
Visual Description: The image depicts the side of the sofa with a recliner lever. A magnified view shows the lever mechanism with the text "ON-PULL" and an arrow indicating the pulling direction.
Care Instructions for Polished Microfiber Fabric Furniture
To maintain the original appearance of your Polished Microfiber Fabric Furniture, please follow these simple care procedures:
- Avoid exposing furniture directly to sunlight or heating and air conditioning outlets. Direct exposure can cause fading or damage to the fabric.
- Regularly vacuum or wipe the furniture with a soft cloth to remove dust.
For furniture placed on wooden floors, hard surfaces, or carpets, it is recommended to install protective pads under all legs and supports. This will help prevent damages, scratches, and discoloration to your floors.
