SIGMA EOX® VIEW 700 & REMOTE ONE

1 BUTTON FUNCTIONS

A Button

• Short press: One page backward, Decrease value
• Long press: Turn device off

B Button

• Short press: One page forward, Increase value
• Long press: Reset training values

C Button

• Short press: Confirm input, One menu level down
• Long press: Open and close menu, Activate/Deactivate Backlight

B + C Button

• Activate/Deactivate Backlight

Note: The backlight turns on for 2 seconds with a button press. It will not stay on permanently due to power consumption.

(Multilingual descriptions for button functions are provided in German, Italian, Spanish, French, and Dutch in the original document.)

2 INSTALLATION

Mounting the EOX® VIEW 700:

• Use the bracket for handlebar diameters of Ø 31.8 mm or Ø 35 mm.
• Ensure a torque of 0.5 Nm.
• A 2.5 mm Allen key is required.
• Optional rubber pads (3D Rubber Pad) can be used for adjustment (±5°).
• A locking screw with a torque of 0.1 Nm (using a 2 mm Allen key) can be used for extra security.

(Diagrams showing the mounting process and torque specifications are present in the original document.)

3 INITIAL WAKE-UP

1. Long press the C Button for 5 seconds to wake up the device.
2. Select the device language. Use A and B buttons to change language, and C button to select.
3. Press the C Button to start searching for a compatible E-Bike.
4. Select your E-Bike to initiate the first connection. The EOX® VIEW 700 and your E-Bike will automatically connect in the future.
5. Set device and user settings.
6. Enjoy your device and start your first ride!

Important Notes for Connection:

• Ensure the E-Bike is turned on and its wireless interface is advertising when the EOX® VIEW 700 is scanning.
• Some E-Bikes are discoverable only for 30 seconds after power-on. It is recommended to press a button on the E-Bike while the EOX® VIEW 700 is searching to ensure detection.

(Visuals illustrating the wake-up process and language selection are included in the original document.)

4 USAGE OF EOX® APP

To use the SIGMA EOX® App:

1. Download the SIGMA EOX® App from the App Store or Google Play Store.
2. Install the app and enable Bluetooth on your smartphone.
3. Turn on the EOX® VIEW 700 by pressing any button. Open the menu, navigate to Connection > EOX App.
4. Open the app and follow the on-screen instructions to set up the app and connect your EOX® VIEW 700.

(Screenshots of the app download and connection process are shown in the original document.)

BATTERY CHANGE

Battery Type: CR 2450

(Diagram showing battery replacement is included in the original document.)

TECHNICAL INFORMATION

• Model: EOX® VIEW 700
• Type: E-bike display
• Power supply: CR 2450
• Weight: 35 g
• Operating temperature: -10/25/60 °C (min/typ/max)
• Storage temperature: -20/25/70 °C (min/typ/max)
• Operation frequency: ANT+: 2457MHz @ 1dBm nominal, Bluetooth: 2402-2480MHz @ 1dBm nominal
• IP rating: IPX6K, IPX7