Philips 8100 Series Quick Start Guide
This guide provides essential instructions for setting up your Philips 8100 Series television, covering stand assembly, connections, and VESA mounting.
What's Included
Your Philips TV package typically contains:
- The television unit
- Stand components (Left and Right)
- Remote control ?
- Batteries (2x AAA 1.5V) ?
- Power cord ?
- Various connection cables
- Screws for stand assembly and mounting ?
Refer to the included diagrams for specific part identification and quantities.
Stand Assembly
Follow these steps to attach the TV stand:
- Carefully place the TV screen-down on a soft, flat surface (e.g., a blanket or the original packaging foam) to prevent scratches.
- Identify the Left (L) and Right (R) stand components.
- Align the stand components with the designated mounting points on the back of the TV.
- Secure the stand using the provided screws. The diagrams indicate specific screw types (e.g., M6, M8) and quantities (e.g., x4, x6) required for different screen sizes (43", 50"/55", 65", 70"). ?
- Ensure all screws are tightened securely but do not overtighten.
Wall Mounting (VESA)
For wall mounting, ensure you use a compatible VESA mount. The following specifications apply:
Screen Size | VESA Pattern | Max Screw Depth |
---|---|---|
43" | 100x200mm M6 | 108 cm |
50" | 200x200mm M6 | 126 cm |
55" | 200x200mm M6 | 139 cm |
65" | 300x300mm M6 | 164 cm |
70" | 300x300mm M8 | 177 cm |
Note: The diagrams illustrate the VESA pattern (x, y) and the maximum screw depth for each screen size. Always use the correct length screws to avoid damaging the TV. ⚠️
Connections
Connect your external devices to the appropriate ports located on the back of the TV:
- TV ANTENNA / COAXIAL: Connect your antenna or cable TV feed here.
- HDMI 1 ARC: Use this port for audio return channel (ARC) devices, such as soundbars or AV receivers.
- HDMI 2/3/4: Connect devices like Blu-ray players, game consoles, or streaming devices.
- USB 1, USB 2: For connecting USB drives for media playback or firmware updates.
- HDD REC: Connect a compatible Hard Disk Drive for recording TV programs (functionality may vary).
- DIGITAL AUDIO OUT (OPTICAL): Connect to external audio systems using an optical cable.
- NETWORK: Connect to your home network via an Ethernet cable for smart TV features and updates.
- POWER: Connect the supplied power cord here. ?
- ROUTER: (Diagram indicates a connection to a router, typically for network setup).
Note: Refer to the diagrams for port locations.
Setup and Support
Initial Setup: After assembly and connections are complete, power on the TV. Follow the on-screen prompts for initial setup, including language selection, network connection, and channel tuning.
Voice Control: This TV may support voice commands via Google Assistant. Press the [Google Assistant button] on the remote control and say "Ok Google" or follow the on-screen setup guide. ?️
Remote Control: Use the provided remote control to navigate menus and operate the TV. Ensure batteries are inserted correctly. ?
Safety Information: Always read the separate safety instructions booklet provided with your TV before operation. ⚠️
Product Registration and Support: Register your product and access comprehensive support, including manuals, FAQs, and troubleshooting guides, at: https://www.philips.com/TVsupport