Pocbuds X1 True Wireless Earbuds User Manual

Packing List

• Charging Case x1
• Earbuds x2
• Type-C Charging Cable x1
• User Manual x1

Product Diagrammatic Sketch

The Pocbuds X1 features a charging case and two earbuds. The charging case includes a lid, a USB-C charging port, and internal charging contacts. Each earbud has a main body, a speaker grille, charging contacts on the bottom, and a multifunction button (MFB) on the side. LED indicators on the earbuds and case display status.

First Time Use

Before first use, remove the protective isolating film from the earbuds. Place the earbuds into the charging case. Charge both the earbuds and the charging case using the provided Type-C charging cable for at least 10 minutes. Do not remove the earbuds during this initial charging period.

Pairing

1. Open the charging case and remove the earbuds. They will automatically enter Bluetooth pairing mode after approximately 3 seconds. The LED indicator on one earbud will flash red and blue alternately, while the other will flash blue slowly. A voice prompt "pairing" will confirm pairing mode.
2. On your device's Bluetooth list, select "X1" to connect.
3. Upon successful connection, you will hear the prompt "connected", and the LED indicator on one earbud will flash blue for 5 seconds before turning off.

Charging

Charging the Earbuds

Place both earbuds into the charging case and close the lid. The charging columns will engage to begin charging.

Charging the Charging Case

Connect the charging case to a power source using a Type-C cable. The last digit of the charging indicator will flash until fully charged and will turn off once the adapter is removed.

Charging Methods

• Method 1: USB-C Cable (Included)
• Method 2: Wireless Charging Pad (not included)

Power On

Auto Power On

When the charging case is opened, the earbuds will automatically power on and begin pairing. A voice prompt "pairing" will be heard, and the indicator light will flash blue for 1 second. If the earbuds do not connect to any device within 5 minutes, they will power off automatically.

Manual Power On

With earbuds in the power-off state, press and hold the MFB button on either earbud for 2 seconds to power them on. A voice prompt "power on" will be heard.

Power Off

Auto Power Off

Place the earbuds into the charging case and close the lid to power them off.

Manual Power Off

Press and hold the MFB button on both the left and right earbuds simultaneously for 5 seconds to power them off. Note: Manual power-off is not possible during music playback or calls.

Calling Control

• Answer / End Call: Tap the MFB button on either earbud once. You will hear a voice prompt indicating an incoming call and the phone number.
• Reject Incoming Call: Double-tap the MFB button on either earbud.

Music Operation

• Play/Pause: Tap the MFB button on either earbud once.
• Previous Track: Quickly double-tap the MFB button on the left earbud.
• Next Track: Quickly double-tap the MFB button on the right earbud.
• Volume Up: Long-press the MFB button on the right earbud.
• Volume Down: Long-press the MFB button on the left earbud.
• Activate/Stop Voice Assistant: Triple-tap the MFB button on either earbud.

Reset Operation

Reset the earbuds if you encounter connectivity or function issues.

1. On your device, forget all pairing records for the earbuds and turn off Bluetooth.
2. Simultaneously tap the MFB button on both the left and right earbuds 5 times continuously. The LED indicators on both earbuds will flash red and blue lights alternately 3 times, indicating a successful reset.
3. Place the earbuds back into the charging case, then remove them to reconnect to your device.