pocbuds OW7 True Wireless Earbuds User Manual
Product: pocbuds OW7 True Wireless Earbuds
Model: OW7
Type: True Wireless Earbuds V2
What's in the box?
The package includes the following items:
- Charging Case * 1
- Type-C Charging Cable * 1
- True Wireless Earbuds * 2
- User Manual * 1
- Earhook
Earbud Components:
- Charging Contacts: Connects to the charging case.
- Charging Indicator: Shows charging status.
- Microphone: For calls and voice commands.
- Touch Area: For controlling music, calls, and voice assistant.
- Earhook: For secure fitting.
Charging Case Components:
- Type-C Charging Port: For charging the case.
- Charging Indicator of Case: Shows the battery level of the case.
[Diagram: Earbuds showing charging contacts, charging indicator, microphone, touch area, and earhook. Charging case showing Type-C charging port and charging indicator.]
Getting Started
First Use
Before the first use, please tear off the insulating film from the earbuds. Place the earbuds into the charging case. Charge both the earbuds and the charging case using the supplied Type-C charging cable for at least 10 minutes. Do not remove the earbuds during this initial charging period.
[Instruction: Tear off the insulating film from the earbuds.]
How to Wear
- Take the earbuds out of the charging case.
- Hold them just above your ears.
- Rotate the ear hooks downward along the auricle of your ear to achieve proper positioning.
- Complete insertion for a secure fit.
[Diagram: Steps showing how to wear the earbuds with ear hooks for a secure fit.]
Pairing and Connectivity
How to Pair
- Open the charging case and take the earbuds out. They will immediately enter Bluetooth pairing mode. The indicator light of the main earbud will flash red-blue alternately, and the secondary earbud will blink blue slowly.
- Enable the Bluetooth function on your device and select "OW7" from the list of available devices.
- The device will display a "successfully connected" message and play a "connected" tone. The indicator light of the main earbud will blink blue for 2 seconds and then turn off.
Auto Connect
- When the earbuds are powered on, they will automatically attempt to connect to the most recently connected device. A prompt will indicate a successful connection.
- If the earbuds disconnect from the paired device due to range limitations, they will try to re-connect automatically within 5 minutes, issuing a prompt upon reconnection.
Note: Paired devices must be within the connection range (10m / 33ft) and powered on. Ensure Bluetooth is enabled on your device.
Controls
Power On/Off
- Power On:
- Pick up the earbuds from the charging case.
- Alternatively, tap and hold the touch area on each earbud for 2 seconds. (Each bud needs to be powered on separately.)
- Power Off:
- Place the earbuds back into the charging case.
- The earbuds will power off automatically if not connected to any device for over 5 minutes.
- If no music is playing and no calls are active, tap and hold the touch area on either earbud for 5 seconds. (Earbuds will power off simultaneously.)
[Diagram: Illustrating power on by picking up from case or tapping, and power off by placing in case or tapping and holding.]
Music and Call Controls
Music Control
- Play/Pause: Double-tap the touch area (Right/Left earbud).
- Next Track: Triple-tap the touch area (Right earbud).
- Previous Track: Triple-tap the touch area (Left earbud).
- Volume Up: Tap and hold the touch area (Right earbud).
- Volume Down: Tap and hold the touch area (Left earbud).
Note: In single earbud mode, volume cannot be adjusted directly from the earbuds.
Call Control
- Answer/End a call: Double-tap the touch area (Right/Left earbud).
- Reject a call: Tap and hold the touch area for 2 seconds (Right/Left earbud).
Call volume adjustment: Use the volume control buttons on the paired Bluetooth device.
Voice Assistant
- Activate/Stop Siri or other voice assistant: Triple-tap the touch area (Right/Left earbud) when no music program is running.
Single Earbud Control
Both earbuds support independent use for mono music or calls. When used alone, the earbuds cannot adjust the volume, but can switch to the next song.
Charging
Charging the Earbuds
- Place the earbuds into the charging case until they are magnetically attached.
- The indicator light of the earbuds will blink red slowly while charging.
- The earbuds will be fully charged after approximately 1.5 to 2 hours in the charging case. The indicator light of the earbuds will turn off when fully charged.
Charging Case Battery Level
The LED indicator in the charging case will show the remaining power for 10 seconds after the case is opened or closed, or when plugged in. The indicator colors represent different battery levels:
- Blue light: High battery level (71-100%)
- Green light: Middle battery level (31-70%)
- Red light: Low battery level (0-30%)
[Diagram: Showing case indicator lights for different battery levels: Blue (71-100%), Green (31-70%), Red (0-30%).]
Charging the Charging Case
- Insert the USB-A to USB-C charging cable into the charging case and connect it to a USB-A power supply or a certified wall charger.
- A solid red light on the charging case indicates that the charging case is charging.
- A solid blue light indicates the charging case is fully charged.
Note: It takes approximately 2 hours for the charging case to be fully charged. The charging case uses a standard 5V±5A USB voltage. Using a high-voltage power source is not recommended. Charging may take longer with a third-party charging cable. Ensure the charging port is dry and free of liquid residue before charging.
Cleaning and Maintenance
Cleaning Earbuds
- Use a soft, clean, dry cloth to clean the earbuds.
- When cleaning the earphone mesh, gently brush away dirt and earwax with a clean, dry cotton swab, then wipe with a soft cloth.
Important Notes for Earbud Cleaning:
- Stop using the earbuds and disconnect all devices before cleaning.
- Do not wash the earbuds directly with water or use ultrasonic cleaning.
- Do not allow liquid to enter any openings of the earbuds.
- Avoid using abrasive cleaners, sprays, high-concentration cleaners, chemical cleaners, alcohol, or acetone solvents. Do not use sharp or abrasive objects.
Cleaning Charging Case
- Clean the charging case with a soft, clean, dry cloth.
- Use a clean, dry, soft brush to remove debris from the charging interface.
- Use a clean, dry cotton swab to gently wipe the charging contact surfaces of the charging box.
Important Notes for Charging Case Cleaning:
- Disconnect the charging case from the charging cable before cleaning.
- Do not use abrasive items to clean the charging case.
Product Parameters
| Parameter | Specification |
|---|---|
| Model No. | OW7 |
| Bluetooth Version | 5.3 |
| Battery capacity | 50mAh * 2 (earbuds), 500mAh (charging case) |
| Charging port | Type-C |
| Transmission range | 10m / 33ft (with no obstacle) |
| Charging Time | 1.5h - 2hrs for earbuds, 2hrs for charging case |
| Auto Connect | Yes |
Troubleshooting and FAQ
How to Reset
Follow these steps to reset your earbuds:
- Turn off the Bluetooth on all connected devices.
- With the earbuds out of the case, tap the touch area on both the Right (R) and Left (L) earbuds 5 times simultaneously.
- Both earbuds will flash red and blue simultaneously 3 times, and you will hear the voice prompt "power off", indicating the reset is complete.
- Place the earbuds back into the charging case.
- Take the earbuds out of the charging case. They will enter pairing mode (one earbud will flash red-blue alternately, and the other will blink blue slowly).
- Search for "OW7" on your device and tap to connect.
[Diagram: Illustrating the reset process with earbuds and tapping the touch area 5 times.]
Common Issues and Solutions
Issue: Sound and video are out of sync, or there's no sound in one earbud, or earbuds keep disconnecting/cutting out.
Possible Causes: Bluetooth signal interference from obstructions (walls, appliances, Wi-Fi), or issues with the connected device.
Solutions:
- Ensure earbuds are fully charged and reset them as described above, then re-pair them.
- Test the earbuds with a downloaded song/video to check for device-specific issues.
- Try using the earbuds with another Bluetooth device in a different environment to see if the problem persists.
- Minimize obstructions between your device and the earbuds.
Issue: Cannot pair or reconnect with device, one side does not pair with the other, no music plays after connecting, or only one earbud has sound.
Solutions:
- Remove any protective film covering the charging connectors on the earbuds.
- On your device, forget all pairing records for the earbuds and turn off Bluetooth.
- Reset the earbuds (ensure they have sufficient battery). Refer to the "How to Reset" section.
- Turn on your device's Bluetooth, search for "OW7", and pair. If a pop-up window appears to confirm pairing, select "Pair". If "Cancel" is selected, refresh your device's Bluetooth (turn off and on) and pair again.
Issue: Earbuds don't recharge in the charging case, stay connected with the lid closed, or don't turn on when taken out.
Solutions:
- Confirm the charging case has sufficient battery power.
- Clean the charging pins on both the earbuds and the charging case with a dry cloth and an alcohol-based disinfectant to ensure they are clean and dry. Place the earbuds correctly into the case; the charging light should illuminate.
- Use only certified charging cables and wall chargers.
Regulatory Information
FCC Caution
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced Radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
[FCC icon] [CE icon] [ROHS icon]
For any questions, please send a message. We will help you solve it as soon as possible. Thank you for choosing pocbuds.
Website: pocbuds.tech
Customer Service: Kindly scan the QR code to activate the lifetime warranty of your earbuds within 15 days. [QR code placeholder - excluded as per instructions]
Note: The original document also contained Chinese text indicating "OW7 - Small Size User Manual", dimensions, material, and printing process. This information is supplementary to the primary English manual content.
