PocBuds T60 User Manual

What's in the box?

• Charging Case x1
• Earbuds x2
• Ear Tips Set x3 (Size M has been preinstalled on earbuds)
• Type-C Charging Cable x1
• User Manual x1

Overview

The PocBuds T60 earbuds feature a charging case, earbuds with LED indicators, microphones, and multi-functional buttons (MFB). The charging case has a Type-C charging port and LED indicators.

First-use

1. Before first use, tear off the isolating film on the earbuds.
2. Place earbuds in the case and charge both earbuds and case for at least 10 minutes using the supplied Type-C cable. Do not remove earbuds during this period.
3. The earbuds are installed with size M ear tips by default. Select other suitable sizes for a secure fit.

Wearing

1. Choose the Ear Tips that fit your ears best.
2. Insert the earbuds into the inner canal of your ears and turn gently until you find the most comfortable and secure position.

LED indicators on the buds will flash white-red in sequence continuously, and the other bud will blink white slowly. If earbuds are not connected to any devices for over 5 minutes, they will power off automatically. Turn them on manually by pressing the MFB button for 2 seconds.

Bluetooth Pairing

1. Open the charging case and pick up the earbuds for 3 seconds to enter Bluetooth pairing mode.
2. Go to the Bluetooth settings on your device (e.g., Settings > Bluetooth).
3. Tap or click "T60" on the list of discovered devices to connect.

Upon successful connection, you will hear "connected" and the LED indicators will turn off. If buds are not in the list, reset the buds.

Switch from one device to another

Earbuds automatically connect to the last successfully connected device. To switch devices, turn off Bluetooth on the previous device first.

Mono mode

Use either earbud individually by placing the other in the charging case. If one earbud runs out of battery, the other can still be used. During calls, the microphone in the active earbud is used.

Power Off

• Remove earbuds from the charging case.
• Disconnect the charging cable from the case and power source.

Earbuds power off automatically if not connected for 5 minutes or when placed in the charging case.

Reset

Reset earbuds if experiencing connectivity or function issues. Ensure earbuds have some battery. Place earbuds in the charging case until they blink red. Press and hold the button on the buds for 8 seconds until LED indicators flash red-white 3 times. Ensure earbuds are properly connected to charging points in the case for successful reset.

Specifications

• Model NO.: T60
• Input: 5V 0.5A
• Rated output power: 5mW(@1% THD)
• Battery capacity: 50 mAh*2 (earbuds), 600 mAh (charging case)
• Driver size: 13mm*2
• Frequency response: 20Hz - 20kHz
• Impedance: 32Ω
• Bluetooth range: 10m/33ft

Specifications are subject to change without notice.

Button Operation tips

Music Mode

• Play/Pause: Press once (R/L)
• Next Track: Press twice (R)
• Previous Track: Press twice (L)
• Volume+: Long Press (R)
• Volume-: Long Press (L)
• Voice Assistance: Press thrice (R/L)

For Call

• Answer/End a call: Press once (R/L)
• Reject a call: Press and hold for 2 seconds (R/L)

Maintenance

Clean your earbuds

Earbuds are sweat and water-resistant, not sweatproof or waterproof. The charging case is not waterproof. Clean charging contacts on buds with a cotton swab slightly dampened with warm water. Clean charging pins on the case with a lint-free cloth slightly dampened with warm water or 70% isopropyl alcohol. Use a soft, dry, lint-free cloth for other areas. Clean eartips separately.

Clean and dry your earbuds and skin after workouts. Keep earbuds and charging case clean and dry.

Charging

Type-C USB charging

1. Ensure earbuds and USB port are dry before charging.
2. Use a certified USB-C cable and charger.
3. Place earbuds in the charging case and close it.
4. Connect the charging case to a power supply using a USB-C cable.

The digital display shows real-time power. The right display panel indicates charging status per bud with 4 grids. The LED indicator on the charging case shows charging status.

Wireless charging

Place the charging case on a wireless charging pad (not included) to charge without cables. Reposition if not charging.

FAQ

Q: What should I do if the earbuds disconnect or the sound is choppy?

Bluetooth signals can be affected by obstructions. Try the following:

1. Fully charge and reset your earbuds, then re-pair them.
2. Test earbuds with a downloaded song/video.
3. Test earbuds with another Bluetooth device in a different environment.

Q: What should I do if pairing, reconnection, or sound issues occur?

Follow these steps:

1. Remove protective film from connectors.
2. Reboot your Bluetooth device, forget earbud pairings, and turn off Bluetooth.
3. Reset earbuds (ensure sufficient battery).
4. Turn on device Bluetooth, search for "T60", and pair. If prompted, select "Pair"; if "Cancel" was selected, refresh Bluetooth and re-pair.

Q: What should I do if earbuds don't recharge, stay connected with the lid closed, or don't turn on?

Check the following:

1. Ensure the charging case has power (white light flashing when opened).
2. Clean charging pins on earbuds and case with a dry cloth and alcohol-based disinfectant. Ensure they are clean and dry. Place earbuds correctly in the case.
3. Use a certified charging cable and wall charger.
4. Check if ear tips are installed properly.

For warranty activation, scan the QR code within 15 days. Visit: www.pocbuds.store