Specifications

Product Details & Dimensions

The Häfele Inline-Dimmer is designed for controlling LED lighting systems. It connects between the power supply and the light fixture.

Diagram Description (Unit): The Inline-Dimmer unit is shown with two cables extending from it. Each cable is 2000 mm in length.

Information (ℹ️): Physical dimensions of the dimmer: Diameter Ø19 mm, Height 12 mm.

Power Input: The device operates on 100-240V AC [Power plug].

Certifications

• CE
• UK CA
• IP20 (Ingress Protection rating)

Installation Guide

Step 1: Mounting

Prepare the mounting surface by drilling holes. The recommended hole diameter for the dimmer body is Ø19 mm. The required mounting depth is approximately 17.5 mm. Connect the cables from the dimmer to the power supply unit. The power supply unit has distinct connection points for 12V and 24V systems.

Diagram Description: Illustrates drilling holes [Drill bit] in a surface, inserting the dimmer unit, and connecting its cables to a power supply unit. Key dimensions shown include 17.5 mm depth and Ø19 mm diameter for the hole. Cable connector dimensions of 13 mm and 8 mm are also indicated.

Step 2: Electrical Connection and Operation

Connect the dimmer to the appropriate Häfele Loox power supply unit (labeled 'A'). The dimmer is compatible with both 12V and 24V Loox power supplies. Connect the dimmer output to your light source. The dimmer allows for adjustable brightness control, ranging from 5% to 100%.

Diagram Description: Shows the dimmer unit connected to a Häfele Loox power supply (A) and then to a light source. A separate illustration displays the dimming control interface, indicating brightness levels from 5% to 100%.