Lindab Access Door EPFH
Mounting instruction
About Lindab and Indoor Climate
Most of us spend the majority of our time indoors. Indoor climate is crucial to how we feel, how productive we are, and if we stay healthy.
Lindab has made it its most important objective to contribute to an indoor climate that improves people's lives. This is achieved by developing energy-efficient ventilation solutions and durable building products. Lindab also aims to contribute to a better climate for our planet by working in a way that is sustainable for both people and the environment.
Lindab | For a better climate
Access Door EPFH with Bayonet Locking
This section provides detailed instructions for mounting the Lindab Access Door EPFH with its bayonet locking system.
Parts Included:
- Cover: The main door panel.
- Fitting: The frame or base that attaches to the ductwork.
- Slot: Grooves or channels on the fitting for the locking mechanism.
Mounting Steps:
- Step 1: Push the cover onto the fitting. Ensure the cover is secure and level all around. (Refer to Figure 1: Diagram showing the cover pushed onto the fitting, ensuring it is secure and level.)
- Step 2: Mark the holes for the rivets on the fitting. (Refer to Figure 2: Diagram illustrating the marking of rivet holes on the fitting.)
- Step 3: Remove the cover. (Refer to Figure 3: Diagram showing the cover removed.)
- Step 4: Drill holes for the rivets at the marked locations. (Refer to Figure 3: Diagram showing holes being drilled for rivets.)
- Step 5: Insert the rivets so that they extend past the drilled holes. The recommended size of rivet is Ø 4.0 mm in 9.5 mm length.
- Step 6: Push the cover back onto the fitting. Ensure the rivets enter the slots. (Refer to Figure 4: Diagram showing the cover being pushed back onto the fitting, with rivets entering slots.)
- Step 7: Turn the cover clockwise to lock it securely into place. (Refer to Figure 4: Diagram showing the cover turned clockwise to lock.)
Lindab reserves the right to make changes without prior notice.
Document Revision: 2020-06-10, Last modified: 2025-07-10
